Android N for the MeMOPad FHD 10 4G - ME302KL
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/Talking about Overclocking:
Overclocking (or underclocking) is optional. The installer lets you choose the maximum frequency. You can set the maximum frequency individually for each CPU core in the installer. Whatever frequencies you chose in the installer will be set at boot for each CPU. Not all devices can handle overclocking. The stock maximum CPU frequency is 1512MHz. I recommend a mild overclock, like 1728MHz for daily use. Clocking higher creates heat and wastes battery for very little performance gain. (FROM ELEMENTALX POST)
talking about CPU voltages
The installer allows you to choose from several undervolting options. These automatically undervolt the lowest frequency (384MHz) where the CPU spends most of its time. The voltages for other frequencies are assigned based on the PVS bin of your phone. CPU voltages are fully customisable with apps such Kernel Tuner or Trickster Mod, but I recommend leaving these other voltages as-is unless you are prepared to do a lot of testing. Be careful, lowering voltages can cause instability. Generally, having reboots while the phone is asleep or other weird problems is a sign that your minimum voltage is too low. The minimum voltage allowed is 700mV. (FROM ELEMENTALX POST)
Max CPU Freqs avaiable (0ver stok 1512000) : 1620000, 1728000, 1836000, 1890000, 1944000, 2052000, 2160000, 2214000
Max GPU Freqs avaiable (Over stock 400): 450, 477, 491, 504, 531, 555, 585
talking about GPU Governor
In wizard you can choose also the simple governor.
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM from the link below
2. Download GAPPS (OpenGapps Micro tested)
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install the rom zip
8. Install GAPPS
9. Install SuperSU to root the Tablet
10. flash Overlay Fix and Init.d Enabler https://www.androidfilehost.com/?fid=529152257862728608
11. Reboot to system
Enjoy Android 7.x !
The ROM is not rooted, so you have to download and install SuperSU with TWRP. You have to use SuperSU
To Set Overclock/undervolt Parameters:
1) go again in TWRP and flash the ElementalX for ME302KL Zipfile
2) follow the wizard to set the parameters
3) reboot the tablet.
4) Use EX Kernel Manager fron google play or Kernel Adiutor to fine tuning of these parameters.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download 7.1.2 r12 Releasehttps://www.androidfilehost.com/?fid=817550096634776292
with ExKernel 6.08 inside. https://www.androidfilehost.com/?fid=889764386195906335
ATTENTION !!!!
This is a new release wit a new kind of ramdisk. System is adapted to it too
Don't install older release of Ex Kernel (before 6.08) or Glitch Kernel (before r566) on this rom if you don't want a bootloop...
Download TWRP Recovery by SevenMaxs : http://xdaforums.com/showpost.php?p=68444210&postcount=44
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p25Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ElementalX
The rom is the Nexus 7 AOSP 7.1.2 Nougat by @DevSwift1 and @zaclimon and @followmsi without some libs : system/lib/keystore.msm8960.so and others and with the /system/vendor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
@DevSwift1
@zaclimon
@SevenMaxs
@followmsi
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDA
evDB InformationAndroid Nougat AOSP 7.1.2 for Me302kl, ROM for the Asus MeMO Pad FDH 10 LTE
ROM OS Version: 7.x
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Last edited:
