[ROM][Pie][OFFICIAL]Resurrection Remix v7.0.2 [unified 3/3t]

Search This thread

Isus <3

Senior Member
Jul 19, 2013
961
377
4b73e7ac5bbb2712e747010bd1fcba73.jpg


I'm getting wakelocks, it seems to be cm14 bug, reboot fixes the problem temp..

it seems to start again when i plug device into MTP

Sent from my ONEPLUS A3003 using Tapatalk
 
Last edited:

chancex

Senior Member
Jan 20, 2011
110
19
Taipei
Sony Xperia Z1
OnePlus One
have insert dual sim and after setup, single icon can't show the "LTE", keep the H+ & 3G flash, disable sim2 mobile data is same, but the data trunk is okey(disable sim1 enable sim2 or disable sim2 enable sim1), that is bug about icon show up or this really can't up to LTE trunk?

update
i'm testing by myself, go to download opengapps (13xMB), use the system download meter to monitor, the higher vaule is 12.2Mb/s, so may be just a "LTE" icon problem.

update again
i see the "LTE" icon after change network profile to "WCDMA/LTE", done!
 
Last edited:

luka1002

Senior Member
Oct 15, 2008
154
18
Zagreb
I can not connect to car stereo with bluetooth . I had to put this in build.prop:

Code:
ro.bluetooth.hfp.ver=1.5


It fix bluetooth connection to car stereo.

And one more, is there any chance can we could have feature to disable pulling status bar while device is locked?
 

jemeljsh

Senior Member
Jul 20, 2012
873
444
Riga
I can not connect to car stereo with bluetooth . I had to put this in build.prop:
Code:
ro.bluetooth.hfp.ver=1.5
It fix bluetooth connection to car stereo.
And one more, is there any chance can we could have feature to disable pulling status bar while device is locked?

I had a question in regard of car stereo connection through Bluetooth. Is there a way to transfer not only the sound of the media playing on OnePlus 3T, but also the ringtone/sms/whatsapp tone ?
I noticed that when an iPhone is connected to my car's audio system both media audio sound (for example, spotify) and ringtone/notification tone can be heard on car's sound system, but in case of android phone (also with OnePlus 3T) ringtone/notification tone is not transferred and it sound solely on the the device itself.
 

stavca

Senior Member
Aug 14, 2012
712
233
hi @apascual89, is there a possibility of creating userbuild?? I mean build without inbuilt root, I tried your ROM and it was superb!! but I'm PoGo player and it didn't work :(
 
Last edited:

geotsai

Member
Jan 8, 2010
41
16
I'm actually encountering a weird bug. When I try to add quicksetting tiles via the pulldown menu, if the tile I'm trying to add is scrolled lower than the rest of the items, I won't be able to add it. What ends up happening is the long-press selected item will attempt to scroll a few lines, and then abruptly stop, and the selected item will no longer be selected. This makes it impossible to add tiles lower down the menu added by RR, as well tiles added by applications that take advantage of the quick tile APIs. This problem was not present previously in CM14 builds, so I can only assume it has to do with the additional tile settings added by RR making the list too long (though those extra options are awesome). Does anyone else have this issue? Can anyone suggest a workaround? Thanks!
 
  • Like
Reactions: MathewBrack

colacola

Member
Jul 13, 2012
16
1
I'm actually encountering a weird bug. When I try to add quicksetting tiles via the pulldown menu, if the tile I'm trying to add is scrolled lower than the rest of the items, I won't be able to add it. What ends up happening is the long-press selected item will attempt to scroll a few lines, and then abruptly stop, and the selected item will no longer be selected. This makes it impossible to add tiles lower down the menu added by RR, as well tiles added by applications that take advantage of the quick tile APIs. This problem was not present previously in CM14 builds, so I can only assume it has to do with the additional tile settings added by RR making the list too long (though those extra options are awesome). Does anyone else have this issue? Can anyone suggest a workaround? Thanks!

I can also reproduce this on my device. I found that increasing the number of columns from three (default) to four (Configurations > Quick Settings > Tile Layout) helps.
 

cosmic76

Senior Member
May 23, 2009
501
72
Mantova
hi all, good Rom for me.
I have a question, there is the possibility to give the two sim a different ring tone?
I would like to combine a ringtone for each SIM
tks a lot
in the Rom stock it is possible to do
 

chancex

Senior Member
Jan 20, 2011
110
19
Taipei
Sony Xperia Z1
OnePlus One
update to RR-N-v5.8.0-20161225-oneplus3t-official.zip, Camera and GPS not stable, 50% chance fail (Camera) or not complete work (GPS).
Camera problem is press screen button, have 50% non-response or flash screen but don't have file be create, finally use the last version "Open camera" to finish this request (photo); GPS is can't finish positioning even have 14 satellites be capture, use the "GPS Status & Toolbox" app to confirm, every positioning process always update agps file.
other dont have any problem, now this firmware is daily use, the GPS problem is urgent.

update:
check the gps.conf and modify to fit Taiwan network status, the GPS positioning under 5 sec.

update2:
GPS still positioning slowly but can be finish (get the position), each time was 55~70 sec, just few times is get position close app then open other app have less 5sec, but just in this way, after few more hours want to get gps position, the position job need 55~70 sec...
please help fix this problem.
 
Last edited:
  • Like
Reactions: endebe

kenzolo

Senior Member
Jun 14, 2012
1,474
3,052
Rome
sorry guys can you test if less frequent notification work properly using telegram?
in some marshmallow rom I have no sound in telegram app when I receive a message regardless seconds set on less frequent option
thanks in advance
 

mickey73

Senior Member
Sep 7, 2005
148
19
cool Rom... Gratulation!!
One question: i cannot change the keyboard to smartkeyboard pro... There is always a reboot oft the phone. Any hints??

Gesendet von meinem ONEPLUS A3003 mit Tapatalk
 
Last edited:

MocnePifko

Senior Member
Jan 24, 2015
83
48
Xiaomi Poco X3 NFC
Xiaomi 11T Pro
Nice feature packed rom. Just what I expected from RR. But there is still a lot of bugs. Some of them are a bit too much for my comfort - gps not working properly is the main one as I use my phone mostly as a sat-nav during the day (driving a lot at work). Camera problems prevent communication apps from working properly (fc). Sometimes laggy and definitely more power hungry than stock too which I'm going back for now. Feature wise fulfils all my needs but too unstable to be used as a dd. I do realize it's only a preview build and I'll definitely come back to it when it reaches its final form though
Edit:
Workaround for gps: if you use gmaps for navi try FasterGPS app from store.
To increase loudness of voice calls edit RX0 Digital Volume" value=84 to 95 in mixer_paths_tasha.xml (root/system/etc)
 
Last edited:

chancex

Senior Member
Jan 20, 2011
110
19
Taipei
Sony Xperia Z1
OnePlus One
Share my gps.conf setting, now can get over 15 satellites, but also need 45~60sec finish positioning, sad...

# Uncommenting these urls would only enable
# the power up auto injection and force injection(test case).
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin

#ifdef VENDOR_EDIT
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
#endif

#Version check for XTRA
#DISABLE = 0
#AUTO = 1
#XTRA2 = 2
#XTRA3 = 3
#test change setting 0 to 1
XTRA_VERSION_CHECK=1

# Error Estimate
# _SET = 1
# _CLEAR = 0
#disable setting
#ERR_ESTIMATE=0

# Global
#NTP_SERVER=0.pool.ntp.org
#NTP_SERVER=1.pool.ntp.org
#NTP_SERVER=2.pool.ntp.org
#NTP_SERVER=3.pool.ntp.org
# Asia
#NTP_SERVER=0.asia.pool.ntp.org
#NTP_SERVER=1.asia.pool.ntp.org
#NTP_SERVER=2.asia.pool.ntp.org
#NTP_SERVER=3.asia.pool.ntp.org
# Taiwan
NTP_SERVER=0.tw.pool.ntp.org
NTP_SERVER=1.tw.pool.ntp.org
NTP_SERVER=2.tw.pool.ntp.org
NTP_SERVER=3.tw.pool.ntp.org
# Europe
#NTP_SERVER=0.europe.pool.ntp.org
#NTP_SERVER=1.europe.pool.ntp.org
#NTP_SERVER=2.europe.pool.ntp.org
#NTP_SERVER=3.europe.pool.ntp.org
# North America
#NTP_SERVER=0.north-america.pool.ntp.org
#NTP_SERVER=1.north-america.pool.ntp.org
#NTP_SERVER=2.north-america.pool.ntp.org
#NTP_SERVER=3.north-america.pool.ntp.org

# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 3

# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0

# Below bit mask configures how GPS functionalities
# should be locked when user turns off GPS on Settings
# Set bit 0x1 if MO GPS functionalities are to be locked
# Set bit 0x2 if NI GPS functionalities are to be locked
# default - non is locked for backward compatibility
#GPS_LOCK = 0

# supl version 1.0
#SUPL_VER=0x10000
# supl version 2.0
SUPL_VER=0x20000

# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0

#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1

#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
#SUPL_MODE=

# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
# test setting form 0x37 to 0x33
CAPABILITIES=0x33

# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000

################################
##### AGPS server settings #####
################################

# FOR SUPL SUPPORT, set the following
# SUPL_HIST=supl.vodafone.com
# SUPL_PORT=7275
# SUPL_HOST=supl.nokia.com
# SUPL_PORT=7275
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7278
SUPL_NO_SECURE_PORT=3425

# FOR C2K PDE SUPPORT, set the following
# C2K is CDMA2000 system
#C2K_HOST=c2k.pde.com
#C2K_PORT=1234

#WiFi Position 1=”On”, 0=”Off”
ENABLE_WIPER=1

# Bitmask of slots that are available
# for write/install to, where 1s indicate writable,
# and the default value is 0 where no slots
# are writable. For example, AGPS_CERT_WRITABLE_MASK
# of b1000001010 makes 3 slots available
# and the remaining 7 slots unwritable.
#AGPS_CERT_WRITABLE_MASK=0

####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
# try to setting form 0 to 3
LPP_PROFILE=3

################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
# try to setting form 0 to 1
NMEA_PROVIDER=1
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
# SGLTE is Simultaneous GSM and LTE
# try to setting form 0 to 1
SGLTE_TARGET=1

##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane, Radio Resource Control
# 0x2: RRLP UPlane, Radio Resource Location services Protocol
# 0x4: LPP Uplane, LTE Positioning Protocol
# try setting to 0x4
A_GLONASS_POS_PROTOCOL_SELECT=0x4
#endif
##################################################
# AGPS_CONFIG_INJECT
##################################################
# enable/disable injection of AGPS configurations:
# SUPL_VER
# SUPL_HOST
# SUPL_PORT
# C2K_HOST
# C2K_PORT
# LPP_PROFILE
# A_GLONASS_POS_PROTOCOL_SELECT
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT=1
 
  • Like
Reactions: endebe

apascual89

Inactive Recognized Contributor
Jan 17, 2011
5,558
13,306
Atlanta, GA
Ok guys I'm back. I'm building now, but this build will basically be up to date with RR sources and not much more we will have to wait a bit more for all source to be out for N and vendor blobs get updated. Hopefully official Lineage support will come soon.....

That is the reason I have tagged the thread as Preview builds. There will be bugs for now.
 
Last edited:

MathewBrack

Senior Member - Social Media Manager - News Writer
Updated build available Here

Read my post above, up to date with RR, but device specific bugs still there.

Changelog

Getting a system UI has crashed message when booting after the latest update. Screen goes black and the phone can't be used. Will play around see if I can diagnose what is wrong and will report back tomorrow

*edit*
Entirely my fault for trying to get away without wiping when updating. Works fine now
 
Last edited:

chancex

Senior Member
Jan 20, 2011
110
19
Taipei
Sony Xperia Z1
OnePlus One
Updated build available Here

Read my post above, up to date with RR, but device specific bugs still there.

Changelog

OMG!!! System UI crash and black screen, rollback to RR-N-v5.8.0-20161225-oneplus3t-official is back to work.

update:
Directly flash update zip get the System UI crash, will try full wipe update, report later.

---------- Post added at 05:10 PM ---------- Previous post was at 05:05 PM ----------

Getting a system UI has crashed message when booting after the latest update. Screen goes black and the phone can't be used. Will play around see if I can diagnose what is wrong and will report back tomorrow

*edit*
Entirely my fault for trying to get away without wiping when updating. Works fine now

so, you directly flash zip file to update? or other way?
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 321
    rrlogo.png

    Resurrection Remix P

    Code:
    [SIZE="4"]/*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */[/SIZE]



    rrabout.png


    Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
    combination of performance, customization, power and the most new features, brought directly to your Device.

    Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
    Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.




    rrinstall.png



    Make sure you have a custom recovery installed(TWRP is the preferred recovery)
    Download the latest Resurrection Remix Rom & the latest GApps package
    Boot into recovery
    Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
    Flash ResurrectionRemix Rom
    Flash Google Apps package(Optional)
    Flash Magisk Root(Optional)
    First boot may take up to 10 minutes.



    rrdownload.png

    ROM Download
    GApps



    rrsource.png


    Resurrection Remix Source
    Device Source
    Kernel Source

    rrthanks.png


    XDA Developers
    LineageOs Team
    Omni Team
    And Of Course To All The Supporters, Donators And Users



    rrbugs.png


    If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.

    Download the Catlog app from the Play Store.
    There is also a donate version which you can purchase to show appreciation.
    After downloading the Catlog app, go to the app settings, and change the log level to Debug.
    Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
    Copy and paste the entire log either to Hastebin or Pastebin
    Save the log, and copy and paste the link into the thread with a brief description of the error.



    XDA:DevDB Information
    ResurrectionRemix Oreo for OP3/T, ROM for the OnePlus 3

    Contributors
    akhilnarang, varund7726, westcrip
    Source Code: https://github.com/ResurrectionRemix

    ROM OS Version: 8.x Oreo
    Based On: LineageOS

    Version Information
    Status: Stable

    Created 2017-06-08
    Last Updated 2019-04-18
    146
    4931972
    Unified RR builds for Oneplus 3/3T​
    Use latest TWRP linked in OP
    Make sure you have latest firmware installed if not, the build won't flash.
    ***This only needs to be done once***



    Using LineageOS unified device trees as a base.
    Harsh's Caesium kernel is included.
    81
    https://plus.google.com/+ResurrectionRemixofficial/posts/R1MoDc8zbWC
    And its up!
    OP3 inclues Caesium kernel by @MSF Jarvis :D
    Huge thanks to our Lineage maintainer @dianlujitao for his work on the device :)
    And also huge thanks to the guys who tested the builds to make sure they were stable and bug-free :D
    58
    Ok guys finally got some time to update. I just finished a build with all the latest LOS device, kernel and vendor commits. All seems to be good google camera works, etc. I'll put up a post in the morning with a proper changelog update and updated frimware links, etc....

    Thanks for the patience lately since I haven't been able to keep up with the thread. Sorry for this teaser/preview post, but just wamted to let you know that I was still alive lol
    53
    Soon™

    rr_teaser.png


    Credits to @Christopher_Kardas for the SS :p