[ROM] PACEfied AmazFit | Huami AmazFit / Xiaomi AmazFit PACE | rel 39 | 1.2.51

Search This thread

Peaschy

Member
Jan 21, 2017
26
14
Cologne
connect to computer and execute in Terminal:
Code:
adb devices
You should see the device otherwise try to fix drivers
then type
Code:
adb setprop persist.sys.language en
Now the watch is set to english

Thanks for the quick reply!!
I´ve done as you told me...
I can see my device after "adb device"
Then I type "adb setprop persist.sys.language en"
But...:
I only see a list with all possible commands
My Watch (US Version) is still in chinese, also after a reboot.

what have I done wrong?
 

Beleriand

Senior Member
May 5, 2010
201
51
Castra Regina
Thanks for the quick reply!!
I´ve done as you told me...
I can see my device after "adb device"
Then I type "adb setprop persist.sys.language en"
But...:
I only see a list with all possible commands
My Watch (US Version) is still in chinese, also after a reboot.

what have I don wrong?

It is

Code:
adb shell setprop persist.sys.language en

my fault
 
  • Like
Reactions: zrikz and Peaschy

zrikz

Member
Apr 13, 2015
7
2
I have just successfully flashed to 1.2.6c and put it into english language, I'm utilizing the chinese amazfit app and have all units in imperial / miles, but my watch face is in km. Any way to force miles?
 

Neuer_User

Senior Member
Jul 16, 2010
1,091
2,528
I have just successfully flashed to 1.2.6c and put it into english language, I'm utilizing the chinese amazfit app and have all units in imperial / miles, but my watch face is in km. Any way to force miles?
No. The whole miles / km thing is still completely unclear. Many people complained that the units were always in miles. So I asked what they want : always in miles or always in km. Everybody who answered said km.

I still hope that we figure out, how to have the watch choose between miles and km correctly. I looked through all stored data in the watch and did not find a setting for this. ?
 
  • Like
Reactions: tekfreak

Peaschy

Member
Jan 21, 2017
26
14
Cologne
No. The whole miles / km thing is still completely unclear. Many people complained that the units were always in miles. So I asked what they want : always in miles or always in km. Everybody who answered said km.

I still hope that we figure out, how to have the watch choose between miles and km correctly. I looked through all stored data in the watch and did not find a setting for this. [emoji853]



For me there was the same.
After a factory reset everything is displayed in km.



Gesendet von iPhone mit Tapatalk
 

MyriaBoa

Senior Member
Jan 19, 2017
163
33
Mine was US version and is still in miles after permanent flashing. Maybe I should run a factory reset, too. Or should i log something before I try that to see what changed if I succeed.
 
Last edited:

Peaschy

Member
Jan 21, 2017
26
14
Cologne
[ROM] PACEfied AmazFit | Huami AmazFit / Xiaomi AmazFit PACE | 1.2.6c

Mine was US version and is still in miles after permanent flashing. Maybe I should run a factory reset, too. Or should i log something before I try that?



For me it worked perfect.
You also delet so the no more Important files on your watch.

---------- Post added at 07:26 AM ---------- Previous post was at 07:23 AM ----------

My watch didn't recognize my sleep last night after flashing. It has been in flightmode. Was that the reason?
 

MyriaBoa

Senior Member
Jan 19, 2017
163
33
Success, language chinese after factory reset but all in km, even though I restored user data
 

articnet

Member
Feb 4, 2017
19
3
Thanks for the firmware!
One quick question...I am using the watch (originally american version 1.3.0n now 1.2.6c) how do I sync with Mi Fit? I am on iOS. Every time I try to add a watch from the mifit app, Amazfit app opens up and that's basically it.
 

bc1977

Senior Member
Dec 22, 2010
245
105
OnePlus 6
Samsung Galaxy Tab S5e
Hi guys,

I've just attempted to switch to permanent 1.2.6c coming from PaceFied 1.2.6b.
All seemed OK but...
Update from recovery seemed very quick and the watch rebooted.
After boot, it was in "Chinenglish" (battery screen display "It can running" :) and Today screen in chinese) .
So i did the setprop again and rebooted.
Nothing changed.
The watch tells me it updated to 1.2.6c but in About Screen, it's still 1.2.6b :confused:
So i decided to do all the flashing again but i've lost root :(

Attached a screenshot of what i did.

I'm a little but confused about what to do to recover from this.

Thanks in advance and BTW @Neuer_User, thanks for all your great work.

Ben
 

Attachments

  • CapturePaceFied.PNG
    CapturePaceFied.PNG
    33.2 KB · Views: 144

1immortal

Senior Member
Aug 19, 2007
1,106
496
Petah Tiqwa
wearyour.tech
my wifi doesn't start with the 1.2.6c.
steps for repro:
1. clean flash of the latest .1.2.5 CN version.
2. boot for root access.
3. flash the 1.2.6c Pacefied version.
4. factory reset.

smartphone side related:
1. Amazfit smartwarch 1.1.5 installed for initial pairing with the watch.
2. CN mifit 2.2.12 - latest version for sleep,steps etc...
3. Play store amazfit smartwarch upgrade - to latest store version for strava sync.

actual:
going to settings, tapping the wifi ... and nothing happens. rebooted the watch few times, wifi doesn't want to work.
 

Cracklydisc

Senior Member
Feb 3, 2017
65
199
Parma
my wifi doesn't start with the 1.2.6c.
steps for repro:
1. clean flash of the latest .1.2.5 CN version.
2. boot for root access.
3. flash the 1.2.6c Pacefied version.
4. factory reset.

smartphone side related:
1. Amazfit smartwarch 1.1.5 installed for initial pairing with the watch.
2. CN mifit 2.2.12 - latest version for sleep,steps etc...
3. Play store amazfit smartwarch upgrade - to latest store version for strava sync.

actual:
going to settings, tapping the wifi ... and nothing happens. rebooted the watch few times, wifi doesn't want to work.

OtaWatch app is used for OTA updates and @Neuer_User remove them for block OTA. The problem is that the same app was also used for the wifi in settings.
The possibilities are 2:
- Add OtaWatch app with the inconvenience of not working notifications and updates
- Disassembly OtaWatch app for block only OTA update (very difficult, odex file on android 5.1 and maybe apps are also protected with proguard)
 

Top Liked Posts