ENG Boot + Root

Search This thread

mweinbach

Portal Writer
Feb 13, 2016
1,342
796
Connecticut
Thread on how to root S8! https://xdaforums.com/galaxy-s8/development/samsung-galaxy-s8-root-snapdragon-t365930

Here is the Eng Boot for the SM-G950U. I did not get this, @unitz0mbie posted it. I am just posting it here. I will write a tutorial to root with this after it is done. We should have root at some point.

G950U1 firmware is the US firmware. It has the CSC info of each carrier but does NOT have any of the bloat or boot logos. For T-Mobile it has WiFi Calling and VoLTE. Verizon texting works with data and WiFi calling. All those carrier features work. AND It changes depending on the SIM card in your phone. So you don't need to keep flashing firmwares.

Thanks to @Rushstrike for going through everything with me for carrier changes.

Modified odin: https://www.androidfilehost.com/?fid=24686680535466915

Factory Binary G950U: https://androidfilehost.com/?fid=962021903579500553

G950U1 Firmware: http://updato.com/firmware-archive-select-model?record=31E7863CD55111E7A5F9FA163EE8F90B

G950W Firmware: http://updato.com/firmware-archive-select-model?record=E9C87532DEBF11E7A5F9FA163EE8F90B
 
Last edited:

mweinbach

Portal Writer
Feb 13, 2016
1,342
796
Connecticut
How to flash G950U1:
1. Download G950U1 for your device and patched Odin.
2. Turn off phone
3. Hold down on Bixby button + power + volume down
4. open patched Odin
5. add the firmware to the AP, CSC, CP, and BL sections of Odin.
6. Plug your phone into your computer (NEEDS TO BE WINDOWS) with Odin open
7. Make sure your device is connected and recognized by Odin.
8. Click start.
9. Enjoy G950U1
 
Last edited:

mweinbach

Portal Writer
Feb 13, 2016
1,342
796
Connecticut
How to change carrier:
1. Download Factory Binary, G950U, and the G950W firmware.
2. Turn off phone
3. Hold down on Bixby button + power + volume down
4. open Odin v3.12.7
5. add the Factory Binary to the AP section of Odin.
6. Plug your phone into your computer (NEEDS TO BE WINDOWS) with Odin open
7. Make sure your device is connected and recognized by Odin.
8. Click start.
9. One the phone reboots run the ADB command, adb reboot bootloader
10-12: Deleted because if redundence
13. Put the HOME_CSC of the G950W firmware into the CSC part of Odin (modded)
14. Click start
15. Open IME setting on Factory Binary
16. Type in *#243203855#
17. Select XAC
18. Click install
19. Wait for phone to reboot
20. Once it does open terminal and type in adb shell
21. Then type in echo "XXX" > /efs/imei/mps_code.dat
22. Type in exit into adb shell
23. Type in adb reboot bootloader
24. Flash the G950U firmware of your choosing without Userdata. Also make sure to flash the non-home CSC
25. Enjoy your new carrier!

CSC Values (replace on of these with the "XXX" in step 21):
BST Boost
VZW Verizon
ATT ATT
USC US Cellular
ACG C Spire
TMK MetroPCS
VMU Virgin Mobile
TFN Tracfone
XAS Sprint
TMB T-Mobile
XAA Unlocked US
SPR Sprint
CCT Xfinity Mobile

Don't entirely know which ones these are:
GCF World Wide
ACG Some Mid West Carriers
LRA A bunch, cant figure it out
 
Last edited:
we still need to get root for the S8. We have permissive SELinux status but still cant get a system mount. We have some people working on it currently. We are also waiting for another kernel from JUSMEJOSE.

Oh I understand that. I've been following that thread. But I know it will be posted here when it happens. I've been helping, but my knowledge in that area is still in the infancy, so I know someone will get it before I do
 

elliwigy

Retired Forum Moderator / Recognized Developer
XDA App Taskforce
we still need to get root for the S8. We have permissive SELinux status but still cant get a system mount. We have some people working on it currently. We are also waiting for another kernel from JUSMEJOSE.

We have jusmejose files already and they're the same exact one's 3 ppl posted already which is same as what we already had essentially

---------- Post added at 05:48 AM ---------- Previous post was at 05:47 AM ----------

Will be possible obtain TWRP Recovery with this ?

No... in fact they won't even root our device as it stands lol
 
  • Like
Reactions: buttsak

mweinbach

Portal Writer
Feb 13, 2016
1,342
796
Connecticut
We have jusmejose files already and they're the same exact one's 3 ppl posted already which is same as what we already had essentially

---------- Post added at 05:48 AM ---------- Previous post was at 05:47 AM ----------



No... in fact they won't even root our device as it stands lol

Ugh. Well we will get it. I know we will. I personally think we need the new Odin to go any further.
 

elliwigy

Retired Forum Moderator / Recognized Developer
XDA App Taskforce
Ugh. Well we will get it. I know we will. I personally think we need the new Odin to go any further.

How would that change anything lol

---------- Post added at 06:34 AM ---------- Previous post was at 06:32 AM ----------

Sweet! Someone Flash eng-boot.tar then run the S7 root.bat and test.

Why? The eng boots that 3 or more ppl posted are the same ones we've had this whole time lol..

But to let you and everyone else know again none of them have root access at all.. all they have is permissive and that is it.. the s7 root bat does nothing, does not work
 
  • Like
Reactions: ZION959 and buttsak

elliwigy

Retired Forum Moderator / Recognized Developer
XDA App Taskforce
we have engboot and we are waiting for people to get root on it.

No we are not.. 5 ppl posted the same "ENG boots" and none of them have root lol..they are only permissive which is the same as what we already had so nothing has changed

Still no root? Thought all we needed was eng-boot. Guess Samsung patched to S7 method??

We've always had ENG boots since the combination firmware.. the ones ppl just posted didnt bother to check it and turns out its the same exact ones... it is a newer build but only permissive
 
  • Like
Reactions: V0idst4r

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    Thread on how to root S8! https://xdaforums.com/galaxy-s8/development/samsung-galaxy-s8-root-snapdragon-t365930

    Here is the Eng Boot for the SM-G950U. I did not get this, @unitz0mbie posted it. I am just posting it here. I will write a tutorial to root with this after it is done. We should have root at some point.

    G950U1 firmware is the US firmware. It has the CSC info of each carrier but does NOT have any of the bloat or boot logos. For T-Mobile it has WiFi Calling and VoLTE. Verizon texting works with data and WiFi calling. All those carrier features work. AND It changes depending on the SIM card in your phone. So you don't need to keep flashing firmwares.

    Thanks to @Rushstrike for going through everything with me for carrier changes.

    Modified odin: https://www.androidfilehost.com/?fid=24686680535466915

    Factory Binary G950U: https://androidfilehost.com/?fid=962021903579500553

    G950U1 Firmware: http://updato.com/firmware-archive-select-model?record=31E7863CD55111E7A5F9FA163EE8F90B

    G950W Firmware: http://updato.com/firmware-archive-select-model?record=E9C87532DEBF11E7A5F9FA163EE8F90B
    18
    How to change carrier:
    1. Download Factory Binary, G950U, and the G950W firmware.
    2. Turn off phone
    3. Hold down on Bixby button + power + volume down
    4. open Odin v3.12.7
    5. add the Factory Binary to the AP section of Odin.
    6. Plug your phone into your computer (NEEDS TO BE WINDOWS) with Odin open
    7. Make sure your device is connected and recognized by Odin.
    8. Click start.
    9. One the phone reboots run the ADB command, adb reboot bootloader
    10-12: Deleted because if redundence
    13. Put the HOME_CSC of the G950W firmware into the CSC part of Odin (modded)
    14. Click start
    15. Open IME setting on Factory Binary
    16. Type in *#243203855#
    17. Select XAC
    18. Click install
    19. Wait for phone to reboot
    20. Once it does open terminal and type in adb shell
    21. Then type in echo "XXX" > /efs/imei/mps_code.dat
    22. Type in exit into adb shell
    23. Type in adb reboot bootloader
    24. Flash the G950U firmware of your choosing without Userdata. Also make sure to flash the non-home CSC
    25. Enjoy your new carrier!

    CSC Values (replace on of these with the "XXX" in step 21):
    BST Boost
    VZW Verizon
    ATT ATT
    USC US Cellular
    ACG C Spire
    TMK MetroPCS
    VMU Virgin Mobile
    TFN Tracfone
    XAS Sprint
    TMB T-Mobile
    XAA Unlocked US
    SPR Sprint
    CCT Xfinity Mobile

    Don't entirely know which ones these are:
    GCF World Wide
    ACG Some Mid West Carriers
    LRA A bunch, cant figure it out
    9
    How to flash G950U1:
    1. Download G950U1 for your device and patched Odin.
    2. Turn off phone
    3. Hold down on Bixby button + power + volume down
    4. open patched Odin
    5. add the firmware to the AP, CSC, CP, and BL sections of Odin.
    6. Plug your phone into your computer (NEEDS TO BE WINDOWS) with Odin open
    7. Make sure your device is connected and recognized by Odin.
    8. Click start.
    9. Enjoy G950U1
    7
    UPDATE: We have succeswsfully rooted an S8+. We are getting the files for S8 and are working on getting it to everyone. We are going to get it out soon. I would say within a week.
    5
    Going to go ahead and follow this so I can get the jump on making a rom for us on T-mobile