This has nothing to do with kernelGetting Force close when in landscape mode. Am on Renovate. Can't work out if kernel or rom?
I am curious, do you find Maple as a bad io scheduler?Thanks for this Amazing kernel!
Cpu : stock
Rom : omega v3
Kernel : notorious 1.3
Scheduler : cfq
And all stock setting
No
Well i am running it as it is. Flash and run. I made my prefered/best settings as stock (balance). Very good performance with a better battery life.What settings do you use yourself? The stock settings? This kernel is running like a dream but I'm curious. Would Maple suit for both phone storage and SD?
As I said, try Blu Spark govenor with fastlane set to "1" in govenor settings. It's from one of the best devs on XDA and really speeds the phone up whilst being kind to battery.What settings do you use yourself? The stock settings? This kernel is running like a dream but I'm curious. Would Maple suit for both phone storage and SD?
As I said, try Blu Spark govenor with fastlane set to "1" in govenor settings. It's from one of the best devs on XDA and really speeds the phone up whilst being kind to battery.
As I said, try Blu Spark govenor with fastlane set to "1" in govenor settings. It's from one of the best devs on XDA and really speeds the phone up whilst being kind to battery.
Install st tweak from op you need to explore app settings b4 you do anything l suggest don't touch kernel settings just install spectrum app and select appropriate profile to avoid problem.
Use the MTweaks app in the first post. Set both CPU Govenors to Blu Active. After this go into CPU Govenor Tuneables and set fastlane to "1"(on) . You can then change how aggressively the govenor ramps up and down by changing the Fastlane Threshold value(higher better battery, lower better performance) . By default its set to 50 but this is quite conservative. I usually have it around 40 for slightly better performance. This is a great govenor by eng.stk who is working on the 3T just now you can read a lot about the govenor in that thread. The phones performance is amazing with this and with the MTweaks app graph you can see the cpu idles much better as well.
supported
Use the MTweaks app in the first post. Set both CPU Govenors to Blu Active. After this go into CPU Govenor Tuneables and set fastlane to "1"(on) . You can then change how aggressively the govenor ramps up and down by changing the Fastlane Threshold value(higher better battery, lower better performance) . By default its set to 50 but this is quite conservative. I usually have it around 40 for slightly better performance. This is a great govenor by eng.stk who is working on the 3T just now you can read a lot about the govenor in that thread. The phones performance is amazing with this and with the MTweaks app graph you can see the cpu idles much better as well.
[B][U][SIZE="2"]NK8895-O-217 ----O-219[/SIZE][/U][/B]
<*>Updated: Upstream Kernel to 4.4.122</*>
<*>Added DEX Patch by [user=3194398]@kbarni[/user]</*>
<*>Permissive state (Fake Enforce), we'll get back to enforce in next build.
<*>CPU OC removed.
<*>Fixed: Lagging
<*>Fixed: VoLTE
<*>Fixed: Hotspot
<*>Fixed: WiFi speed meter, broken data usage etc...
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK210 ----O-217[/SIZE][/U][/B]
<*>Updated: Upstream Kernel to 4.4.115</*>
<*>Updated: Source & ramdisk to CRAP (oreo base)</*>
<*>Updated: Magisk.V15.4
<*>Added: Wireguard Support
<*>Selinux "Permissive" state is not available anymore, for security reasons.
<*>Increase overall system smoothness
<*>Improvements in terms of performance & security
<*>Temporary fix for WiFi done by mwilky & nox
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK209 ----NK210[/SIZE][/U][/B]
<*>Updated: Upstream Kernel to 4.4.91</*>
<*>Updated: Magisk.V14.3 (No more "root loss" issue)
<*>Increase overall system smoothness
<*>Improvements in terms of battery life (SOT)
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK208 ----NK209[/SIZE][/U][/B]
<*>Updated: Upstream Kernel to 4.4.90
<*>Updated: Magisk.V14.2
<*>Updated: SuperSU SR5-SuperSU-v2.82-SR5-20171001224502
<*>Updated: suhide-v1.09-20171001222116
<*>Updated: Back to jesec way for fake enforce to eliminate some bugs with supersu users
<*>FIX: Camera selective focus mode
<*>FIX: Increased battery consumption while in IDLE
<*>DISABLED: "CUSTOM" CPU_BOOST & INPUT_BOOST drivers
<*>UNDER THE HOOD OPTIMIZATION & fixes
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK205 ----NK208[/SIZE][/U][/B]
<*>UPDATED: Choosable! OC CPU (M2) up-to 2652000
<*>Possible fix for random reboots
<*>Possible fix for root lost
<*>GPS FIX
<*>Updated: Default farovitus's settings
<*>Disabled: INPUT_BOOST
<*>Added: Boeffla_wakelock_blocker + set default list of wakelock to block natively
<*>Added: CPU_BOOST
<*>UNDER THE HOOD OPTIMIZATION & Fixes, have to thanks [user=4898097]@arter97[/user] for his advice regarding reducing dropped frames.
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK204 ----NK205[/SIZE][/U][/B]
<#ffffff><*>UNDER THE HOOD OPTIMIZATION
<*>FIXED: CPUFREQ Bug
<*>FIXED: Switching between Enforce & Permissive (A script to load)
<*>FIXED: End of aroma install goes black
<*>UPDATED: Super-SU-SR4-SuperSU-v2.82-SR4-20170918204844
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK202 ----NK204[/SIZE][/U][/B]
<*>UPDATED: Full N950F source AQH9 ( I MEAN [B]FULL "N950FXXU1AQH9" SOURCE[/B] )
<*>UPDATED: Ramdisk: N950F AQI1
<*>UPDATED: Enabling DEX with any HDMI adapter (compability with N8 KERNEL SOURCE)
<*>UPDATED: Boot with Permissive mode by default, with ability to switch to Enforce. (Use enforce for increased system security or when you are using an app that requires SELINUX MODE TO BE SET AS "ENFORCING",e.g. some banking apps)
<*>Added: All features imported from "NOTORIOUS-Kernel-8895-NK202"
<*>Default linux version from N950 kernel source (4.4.13)
<*>FIXED: GPS FOR S8 ROMS & N8 PORTS
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK201 ----NK202[/SIZE][/U][/B]
<*>ADDED: Enabling DEX with any HDMI adapter, credits go to [user=8306329]@karatekid430[/user] & [user=3194398]@kbarni[/user]
<*>UPDATED: Linux: 4.4.88-rc1
<*>FIXED: Possible fix for ADB
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-NK200 ----NK201[/SIZE][/U][/B]
<*>FIXED: VoLTE
<*>FIXED: You are now able to change selinux mode from ENFORCE ( init.d support + sound mods like ARYA working) and ability to set it to permissive if you would like for some unknown reason.
<*>UPDATED: F2FS to the latest from F2FS-Stable-Branch (Disabled By Default, may be enabled soon)
<*>DISABLED: Couple of TCP Algorithms that none of us use.
<*>Under the hood Optimization
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.9 ----NK200[/SIZE][/U][/B]
<*>Thanks for [user=6832255]@Nameless[/user] and @ alexcbrookes for new banner and logo design
<*>Updated: Kernel source AQH3
<*>Updated: Ramdisk update N950FXXU1AQI1 ;)
<*>Updated: Latest Linux 4.4.87
<*>Updated: Magisk-v14.0
<*>Updated: SR3-SuperSU-v2.82-SR3-20170813133244
<*>Updated: Aroma to aroma_installer-3.00b1
<*>Updated: Default settings
<*>Updated: Re-worked profiles for Spectrum
<*>Added: CPU: OC M2 to (2490000 MHz)
<*>Added: GPU: OC (600 MHz)
<*>Added INPUT_BOOST
<*>Added SWIPE2SLEEP feature (only functional in Navigation bar height to prevent conflict...)
<*>Added IMPULSE, ZZMOOVE, CULTIVATION GOVERNOR
<*>Added latest UPDATE-suhide-v1.08-20170815171034 (Exported to your internal memory, flash it after a full system boot)
<*>Under the hood Optimization
<*>Disabled: Some modules & debugging options
<*>Disabled: F2FS : , NOT SUPPORTED (NO IMPROVEMENT WHEN USING IT)
<*>Fix Heart rate sensor
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.8 ----V1.9[/SIZE][/U][/B]
-CLEANING DAY !!!!
-Also i reverted OC for A53 for now.
-Updated Magisk v13.0 to latest build (c4377ed)
[I][CENTER]IN GENERAL THIS IS SMOOTHER THAN PREVIOUS BUILDS!![/CENTER][/I]
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.7 ----V1.8[/SIZE][/U][/B]
-Revert back to my lovely toolchain
-Even if i don't like OC, i decided to include the ability to let users decide to take advantage of "OC M2 to 2.65Ghz" and OC A53 to 1.7Ghz
-Revert some changes, that may made battery life much worse
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.6 ----V1.7[/SIZE][/U][/B]
-Fixed issue with users who are having random reboots
-Removed any useless code and "bad" commits
-Revert installation script back to it's original state on V1.4
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.5 ----V1.6[/SIZE][/U][/B]
-Latest Linux patch 4.4.75
-Possible Fix for Deep Sleep issue on some devices after V1.5
-Fix installation problem for N Variants
-Small adjustments for codes and scripts under the hood
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.4 ----V1.5[/SIZE][/U][/B]
-NEW Toolchain ;)
-Latest Linux patch 4.4.74
-Better Deep Sleep
-TUNE Maple io governor a bit
-Some Needed & Important Changes.
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.3 ----V1.4[/SIZE][/U][/B]
-Update SOURCE & RAMDISK to AQF7
-Add & Enable IMPULSE cpu governor
-Fix bugs in installation script
-Latest Magisk Beta: v13.0 (54e6a79)
-Add Kernel name in Spectrum app
-Some Under Hood Optimization !!
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.2 ----V1.3[/SIZE][/U][/B]
-Latest Linux patch 4.4.73
-Changes related to lz4 and ZSWAP
-Private Mode should be now supported thanks to [user=3699616]@mwilky[/user] (kernel side)
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.1 ----V1.2[/SIZE][/U][/B]
-Latest Linux patch 4.4.72
-Big Update Regarding F2FS
-Replaced MagiskV12 WITH NEWEST MAGISK-V13(96f8efc)BETA
-Some Under Hood optimization & FIXES !!
-Cleaning for some scripts & Codes
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
NEEDED : Clear MTweaks app's data.
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.0 ----V1.1[/SIZE][/U][/B]
-Updated Ramdisk to AQEB
-SuperSU issues is fixed.
-Probably fixed an issue for "some" (stuck at samsung logo) needs more tests by you guys.
-NEW SPECTRUM PROFILE, Old V1.0 balance profile is now battery profile in V1.1
-Some changes related to F2FS.
-More TWEAKS & OPTIMIZATION !!
[U][B]Built-With-Love ;) //// Press the like button if you like/support my work !! [/B][/U]
NEEDED : Clear MTweaks app's data.
[B][U][SIZE="2"]NOTORIOUS-KERNEL-8895-V1.0 [/SIZE][/U][/B]
CHECK_THREAD