i don't want to take the thread a lot out of topic, but had to ask, did you flash Magisk with it? beta i think will work not stable!
[KERNEL] [blu_spark r218 unified OP3/3T] [OOS 5.0.*]
- Thread starter eng.stk
- Start date
You'll have to find that out yourself, I'm not moving to Oreo any time soon. Let's stay on-topic.
Source is out for OB:
https://github.com/OnePlusOSS/andro...8996/tree/oneplus/QC8996_O_8.0.0_Beta?files=1
https://github.com/OnePlusOSS/andro...8996/tree/oneplus/QC8996_O_8.0.0_Beta?files=1
@eng.stk would you fix your twrp to get it working with oreo? [emoji6] that would be handy and awesome like all your work so far!
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
---------- Post added at 02:03 PM ---------- Previous post was at 02:02 PM ----------
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
---------- Post added at 02:03 PM ---------- Previous post was at 02:02 PM ----------
That for sure! [emoji16]
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
WARNING
All the stuff here about betas and twrp is off topic and should be anywhere but this thread ( or it can be temporarily closed )
The dev is working hard to update just do like the others and wait..
All the stuff here about betas and twrp is off topic and should be anywhere but this thread ( or it can be temporarily closed )
The dev is working hard to update just do like the others and wait..
Are we calm now? 
I'm going to address this only once:
I've been working on TWRP 8.0 tree (build with Android 7 tree since there's still no stable 8 tree) on the last weeks.
TWRP 8 it's still unfinished and there's some quirks that will be noticiable and will brings issues.
So, for now TWRP will stay as it is, remove the assert of the zip you want to flash, should work.
When something it's ready, it will come.
If you're in a hurry, do it yourself.
My primary objective is the kernel and I'm working on the Oreo bringup, need to rebase and rework quite some stuff.
So even that will take a some time.
Bottom line: have patience and wait, tame down the OT impulse.
Sent from my blu_spark'd OP5 using Tapatalk
I'm going to address this only once:
I've been working on TWRP 8.0 tree (build with Android 7 tree since there's still no stable 8 tree) on the last weeks.
TWRP 8 it's still unfinished and there's some quirks that will be noticiable and will brings issues.
So, for now TWRP will stay as it is, remove the assert of the zip you want to flash, should work.
When something it's ready, it will come.
If you're in a hurry, do it yourself.
My primary objective is the kernel and I'm working on the Oreo bringup, need to rebase and rework quite some stuff.
So even that will take a some time.
Bottom line: have patience and wait, tame down the OT impulse.
Sent from my blu_spark'd OP5 using Tapatalk
Last edited:
As a reminder, this is a kernel development thread. If your question or discussion isn't relevant to this kernel, take it elsewhere.
Cheers,
Magnum_Enforcer
FSM
Cheers,
Magnum_Enforcer
FSM
D
Deleted member 8298852
Guest
I've been having a problem on my OnePlus 5:
Whenever I try to make a backup in TWRP, I get this result after trying to back up data:
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.
I restore a backup, but I don't know what's causing this problem. After doing a few things, I get this error again after trying to backup data.
This happens on Official TWRP and Blu_Spark TWRP. Can anyone help me?
Whenever I try to make a backup in TWRP, I get this result after trying to back up data:
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.
I restore a backup, but I don't know what's causing this problem. After doing a few things, I get this error again after trying to backup data.
This happens on Official TWRP and Blu_Spark TWRP. Can anyone help me?
Ok, sorry for you but what can we do on OnePlus 3/T section?!
D
Deleted member 8298852
Guest
I didn't notice there was a 3/3T section. Suppose I had a 3T? What would you do then?
if you're using Blu_Spark TWRP from this thread, it means you're using the wrong version and that might be your problem.
if you're using the OP5 version twrp-3.1.1-x_blu_spark_v45-op5...posting in the OP5 thread you'll get help from people that have your same device.
D
Deleted member 8298852
Guest
No, I think I downloaded the right one, I got the link on a guide for the OP5. And this problem hasn't always happened for me. Last time it happened, I had to re-download OxygenOS and OOS Recovery and press "Forgot Password" to wipe the system and SD Card. I don't want to do that again...
STOP!
1- twrp is Off Topic on this Kernel Development Thread, please read OP
2- OP5 is OT on OP3/T Cross Device Development
3- open a new thread here https://xdaforums.com/oneplus-3/help or in op5 section if you want
4- good night
D
Deleted member 2044343
Guest
Please read the first post on top of page 669 (topic WARNING), it's answered already
Try it, but it will cause a bootloop because the kernel is for nougat (sdk25) but the open beta is on oreo (sdk26)
Why would anyone try it when the developer has already stated he is working on the bringup of Oreo?
Of course it won't boot. Doesn't even get to the boot animation.
If it booted we would have already posted it.
r190 OOS build is for Nougat, end of discussion.
Now can we stop this nonsense? Read.
https://xdaforums.com/oneplus-3/oneplus-3--3t-cross-device-development/kernel-t3404970/post74158302
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
544
Kernel features:
- Build with custom toolchain blu_naro-7.3 (cortex-a57 targeted, build with latest Crosstool-NG from developer snapshot Linaro GCC 7.3-2018.04)
- Full -O2 build with device and target flags enhanced, linaro build improvements, etc
- Less is more: stockish OP3/OP3T unified builds based on OnePlusOSS/android_kernel_oneplus_msm8996
- Systemless installer (doesn't touch system partition, OTA friendly - Nougat only)
- Removed some debug and logging options
- ARM enhanced performance and battery patches
- CVE security patches, general upstream and CAF fixes
- Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
- No OC, set 300HZ base timer frequency
- msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
- Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
- Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS & CIFS)
- Removed verify and forced encryption, Set androidboot.verifiedbootstate=green
- Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
- Disabled hotplug on low battery levels
- Optimized crypto routines
- Swap and adaptive LMK off by default, 60 apps on background by default
- Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel)
- KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
- sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
- DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
- Battery/Notification LED control
- FS fsync toggle on/off
- Wakelock blockers available
- zx2c4's wireguard support
- CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
- init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
- Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP and RECOVERY (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Builds for OP3/3T are unified (so can be flashed in both devices).
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless in case of Nougat). Oreo builds touch system partition.
You can backup your boot & system (Oreo) with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
XDA:DevDB Information
blu_spark op3-op3t, Kernel for the OnePlus 3
Contributors
eng.stk
Source Code: https://github.com/engstk/op3t
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r217 Oreo unified
Stable Release Date: 2018-07-28
Current Beta Version: r218 Oreo unified
Beta Release Date: 2019-03-26
Created 2016-06-24
Last Updated 2019-11-29155Touchscreen FW update Magisk module
As you know, OnePlus improved the touch responsiveness in OB 13/4.
New touch FW really drops the latency, it's a nice pair to blu_spark
So I decided to do yet another Magisk module, so you can so you can test this enhancements in any ROM, systemlessly.
Just import the zip in Magisk module manager and reboot to profit :highfive:
ps: this is not a firmware/radio/bootloader zip update, but a fw binary file from the OB13/4 ROM for the TP controller driver.
No mirrors allowed
If you like my work, donations are always welcome (but not mandatory).
Don't forget to hit thanks and rate the thread nicely, it's free119blu_spark extras v8.61
All right crew!
Here's an updated TWRP with all the blu_spark goodies inside and fully synced with TWRP Android-8.0 branch (including more recent upstream than official TWRP) and some specific device fixes.
Fully synced with TWRP 3.2.1 goodies, name changing to reflect base 8.version, full compatible with OOS Oreo OB and Nougat (reported by testers).
twrp-3.2.1-x_blu_spark_v8.61-op3_op3t.img
Keep it real, keep it true, keep it blu :highfive:
Wakelock blocker info and example script
Android wireguard-tools Magisk Module
I'm just sharing my personal mods since people asked, meaning no support will be given (don't bother post about it).
If your cat get's on fire you're on your own ;p
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
