[KERNEL] & [ROM] [4.4.4] A2N Kernel & CM11 for Galaxy Ace 2 [CPU/GPU OC/UV] [Charger Control] [R97] [STABLE]

Search This thread

heml0ck

Senior Member
Nov 23, 2012
148
9
Sto.Tomas ,Batangas
i just back to stock 4.1.2 and try the kernel for stock rom.. i use temp cwm and try to install the latest kernel for stock but it says it always aborted? whats the problem.. i rooted it and try the rooted version still same outcome.. but when i look in the settings and check the kernel it was installed.. is it normal?
 

Yønn

Senior Member
Still stable ? - For me yes ;)
Unfortunately, no... :crying:
I had a reboot yesterday (maybe more like 2 or 3), and here is the last_kmsg.
I also still have the same problem (GPS crash) as before with Waze (either with previous stable, test, and test2 Kernels).
Anyway, I hope your efforts improving this kernel will be rewarded.

EDit : and now it is rebooting like hell, I don't know why because it was almost stable...
 

Attachments

  • last_kmsg.txt.zip
    48.2 KB · Views: 20
Last edited:
  • Like
Reactions: ace2nutzer

ace2nutzer

Recognized Developer
Apr 28, 2014
5,668
7,156
39
Germany
Samsung Galaxy Ace II
Samsung Galaxy S8
Unfortunately, no... :crying:
I had a reboot yesterday (maybe more like 2 or 3), and here is the last_kmsg.
I also still have the same problem (GPS crash) as before with Waze (either with previous stable, test, and test2 Kernels).
Anyway, I hope your efforts improving this kernel will be rewarded.

EDit : and now it is rebooting like hell, I don't know why because it was almost stable...

Thanks for your Report.
I've reverted to C4 State, this is 100% stable at least.
As for the Waze/GPS FC, i think i've found the reason for this.

Code:
binder: 2243: binder_alloc_buf, [B]no vma[/B]

which means no more virtual memory free ... and it's because vmalloc is too low with 112MB:

Code:
vmalloc : 0xf0800000 - 0xf7800000   ( 112 MB)

I'll increase this to the highest possible ;)
 

Yønn

Senior Member
@Yønn

i've uploaded new sdcard_only kernel.
Increased virtual memory from 112MB @ 2160MB !
Please test how it goes with Waze.
Currently it's still a test build as i'm still building the ROM.
(fixing some bugs and improving performance)
After installation of the Kernel I get Waze crashing at start-up. See logcat and dmesg.
I will try to reboot once again.
 

Attachments

  • logcat.txt
    43.3 KB · Views: 9
  • dmesg.txt
    45.1 KB · Views: 14
  • Like
Reactions: ace2nutzer

Yønn

Senior Member
OK, it was even more worse.
I hope i've fixed it now!
Uploaded right now a new test kernel with same file name.
Seems to work fine now :angel:
Thank you.
It works better. No crash at Waze startup. But still GPS issues when using Waze after some time. See logs.
 

Attachments

  • logcat.txt
    45.5 KB · Views: 8
  • dmesg.txt
    64 KB · Views: 12
  • Like
Reactions: ace2nutzer

AkosPaha

Senior Member
Aug 20, 2016
215
35
22
Budapest
Help ME GUYS !!! I update the phone after it turned on, then I use it for a while until it froze and now my phone don't turn on what to do?:crying: @ace2nutzer
 
Last edited:

Sidebandit

Senior Member
Feb 7, 2016
151
41
London
Help ME GUYS !!! I update the phone after it turned on, then I use it for a while until it froze and now my phone don't turn on what to do?:crying: @ace2nutzer
eMMc, had the same pob with a 2nd hand ace 2 i brought back in the summer for experimenting on. Flashed stock from GB to JB then on reboot nothing. Get a cheap 2nd hand ace2 & use the best housing from the 2 with the good main board.
 

ace2nutzer

Recognized Developer
Apr 28, 2014
5,668
7,156
39
Germany
Samsung Galaxy Ace II
Samsung Galaxy S8
New Builds are Up !!

Changelog:

Kernel 20171216:
  • LK3.0.101 -> LK3.0.31
  • Cleaned almost the whole Kernel Source
  • More closely to Stock Source
  • OTG Ready
  • Ready for LK3.4 upgrade
  • Removed LZ4 implementation (for now)
  • Removed ExFat Driver
  • Improved Performance && Stability
  • Reduced power consumption
  • More Smooth
  • Some Kernel Tweaks
  • Re-configured memory management - minfree, adj values and basic memory management
  • Logger: reduced buffer
  • Sweep2Wake optimizations - stability fix
  • Mali: disabled debugging and added some optimizations
  • Compiled with higher set of optimizations
  • Fixed Wifi when using "soft reboot" or when a soft reboot happened after an crash (performed by kernel itself)
  • Mali: fixed memory allocations failures (accidentally had reverted this fix lol)
  • Added partially DRM Support
  • Fixed B2R2 Driver (as well accidentally reverted during cleaning sources XD)
  • Mali: pre-allocated-memory-max: 16 @ 0MB for faster system when not playing games
  • kmsg: reduced some spamming from the charger
  • cpuidle: reset to stock
  • Fixed BLN blink and updated blink_on/off_delays - for lowest power consumption
  • Fixed BT-Audio on Suspend (untested)
  • Fixed ramdom FC Apps
  • Fixed USB bugs from previous unstable release
  • Fixed App installation from previous build
  • Reduced Wakelocks - deep sleep works properly now
  • Disabled SELinux - serves nothing
  • Inkl. A2N Kernel Control [GT-I8160] Demo V3.1


A2N Kernel Control [GT-I8160] V3.1
  • GPU: added ability to adjust mali-pre-allocated-memory-size

CM11 ROM 20171213:
  • Re-added "Soft Reboot"
  • Disabled SELinux
  • Re-compiled with higher optimizations level
  • Higher Performance
  • incl. A2N Kernel 20171216 - normal version
  • Inkl. A2N Kernel Control [GT-I8160] Demo V3.1
  • AUTO wipes, except factory reset

Uploaded also new Version of:
- ODIN Kernel
- GT-I8160P-Support
and
4.1.2 A2N Kernel for Stock JB ROM (same changelog like above here)

Tip:
Wipe data of A2N Kernel Control and re-configure for proper functionality :good:

Enjoy ! ;)
 

AkosPaha

Senior Member
Aug 20, 2016
215
35
22
Budapest
Hi Guys! I would like to ask if anyone can help me where i can buy eMMc in Ace 2 and how can I replace it (so it works).
Some pictures from my Ace 2
 

Attachments

  • 20171217_141927.jpg
    20171217_141927.jpg
    258.5 KB · Views: 109
  • 20171217_142810.jpg
    20171217_142810.jpg
    268 KB · Views: 115
  • 20171217_141942.jpg
    20171217_141942.jpg
    254.9 KB · Views: 114
  • 20171217_141932.jpg
    20171217_141932.jpg
    266.9 KB · Views: 117

Top Liked Posts

  • There are no posts matching your filters.
  • 120
    Revive your Samsung Galaxy Ace 2 phone in 2023!
    Fastest custom kernel world-wide with lots of innovative features!

    Supports all Ace 2 Variants Running Android 4.4.4

    • GT-I8160
    • GT-I8160P
    • GT-I8160L

    This Kernel and ROM Aims are to
    • reduce the power consumption
    • improve the performance
    • make it more smooth
    • reduce RAM usage
    • improve RAM management
    • extend device features
    • and many more ....

    A2N Kernel Special Features
    • SafetyNet: OK
    • Google Play: device is certified
    • Charger control for faster charging
    • Battery care
    • Stable CPU OC up to 2 x 1,3 GHz
    • Stable GPU OC up to 1 x 750 MHz
    • Adjustable Battery Max Temp
    • CPU / GPU / RAM OC / UC / OV / UV
    • Audio Gain
    • Ability to set different CPU Freq while screen ON/OFF
    • Kernel modules for CIFS and NFS
    • Enabled zRam (RAM compression) - with fast LZ4 compressor
    • SELinux in permissive mode
    • Flashlight tuning (torch)

    A2N Kernel Control - App Features

    Best way to tune this kernel to your needs
    Note: 3-party kernel manager apps do not work with this kernel.


    -- Charger control
    -- Battery care
    -- Battery thermal control
    -- Audio Low-level gain control
    -- Sweep2Wake
    -- CPU/GPU OC control with voltage control
    -- Limit CPU max_freq on suspend
    -- CPU/GPU governor tuning incl. input-booster
    -- Performance profiles
    -- SWAP/zRam
    -- Backend Network stuff like NFS, CIFS etc..
    -- Torch brightness control
    -- Notification LED through the soft-touch-keys - adjust blink_on, blink_off delay
    -- Accelerometer calibration
    -- Advanced Power Menu - ability to reboot to recovery / download-mode
    -- And many more!

    Installation

    Step 0
    This step is only needed if your Android version is lower than 4.
    If you have already Android 4.1.2 or even 4.4.x installed, then go to step 1.

    Update to the latest Samsung stock ROM 4.1.2 with ODIN.
    Make sure your battery level is at least 70 % before you proceed.

    I'm a noob, please show me more details:

    Download needed files for Windows (for other OS, please search the web):

    Samsung USB Driver for Mobile Phones

    odin3_v3.07.zip offline flasher

    Stock ROM

    For the GT-I8160 you need:
    I8160XXMB4.zip (3-parted)
    and
    ONE-I8160XXNF2-20140930142454.zip (Latest stock ROM)

    For the GT-I8160P you need:
    CODE_GT-I8160P_I8160PXXLK2_CL1211774_REV00_user_SEC_KEY_XLK2_4G.zip ( first 3-parted)
    and
    CODE_GT-I8160P_I8160PXXME1_DBT_1106830_REV00_user_low_ship.zip (second 3-parted)
    and
    DBT-I8160PXXMG2-20130820164646.zip (Latest stock ROM)

    For the GT-I8160L you need:
    GT-I8160L-3parted.zip (3-parted)
    and
    PGU-I8160LUBMK2-20140603151522.zip (Latest stock ROM)

    After you've downloaded the needed files and you've unpacked and installed the Samsung USB Driver, you can proceed wit the upgrade.
    Note: All your data will be deleted, so it's recommended to backup some important files to your computer, including the content of your sdcard.
    First of all, export all your contacts to your ext-sdcard. Later you will need this file in order to import your contacts into the new ROM because the new ROM CM11 has a small issue that it can't read SIM contacts.
    Now copy the exported contacts to your PC and then format the sdcard as FAT32 if you can, if you don't know how to do that, it's also (for now) enough to simply delete all files and folders from the sdcard.

    Unpack Odin3_v3.07.zip and open the program inside, it's: Odin3 v3.07.exe

    Unpack the ROM, for example we unpack the ROM: I8160XXMB4.zip for the GT-I8160 which is a 3-parted stock ROM.

    Well, now power off the phone and remove the sdcard.

    Press and hold at the same time: volume down + home + power button.
    The phone will boot directly to "Download Mode", now press "Volume +" to enter "Download Mode".
    Connect the phone with your PC with the USB cable (important: during flashing don't turn off your pc or phone, also don't touch the phone or the USB cable)
    Your phone should be recognized by ODIN .. you can see this in "ID:COM"
    if not, then the USB drivers for Samsung mobiles are not properly installed !

    Don't change the check boxes !!!

    Now load the *.tar.md5 files as follows into ODIN:

    PDA = HOME OR CODE (*.tar.md5)
    Wait until the MD5 check is done and proceed by adding the next package in ODIN.
    CSC = CSC (*.tar.md5)
    PIT = *.pit File (the checkbox Re-Partition is now checked :))

    Before you press "Start", make sure everything looks like this:
    For 3-parted stock ROM:
    http://www.xda.mister-freeze.eu/XDA-files/ace2nutzer/GT-I8160/General/odin_3parted.png
    For latest Stock ROM:
    http://www.xda.mister-freeze.eu/XDA-files/ace2nutzer/GT-I8160/General/odin.png

    Finally press "Start", be patient ... this takes around 7 minutes.

    The phone will reboot several times. When you see the pad for entering the SIM PIN ... then the (3-parted) ROM was flashed successfully and you can now remove the USB cable and reset ODIN and you should flash the next ROM with ODIN which is:

    ONE-I8160XXNF2-20140930142454.zip (Latest Stock ROM)

    flash it exactly like the 3-parted one, with the difference that it's only one file to add in ODIN .... see the screenshot "For latest stock ROM" which is odin.png.

    Step 1
    Download required files and copy them to your micro sdcard without to unpack them:

    Temp_CWM_6.0.2.8.zip to your sd-card, do not unpack it.

    CM11

    A2N Kernel (choose normal version, or if you want to increase the space for apps, then choose "sdcard_only", but you need micro-sd-card and you should perform re-partition - very easy - step-by-step)

    Optional re-partition:
    cwm_cm11_partitions_layout_sdcard_only.zip (for sdcard_only version) OR
    cwm_cm11_partitions_layout.zip (for normal kernel version):

    gapps (required for Google Play)
    Choose ARM - 4.4 - pico
    OR
    if it's no longer available, then use this version from FTP-Server

    Swype_fix.zip

    Explicit for GT-I8160P, download GT-I8160P_Support_Vx.x.zip

    Explicit for GT-I8160L, download GT-I8160L_Support.zip

    Step 2 (only required if your device has no cwm recovery)
    Flash a2n_kernel_gt-i8160_ODIN.tar with ODIN in order to have CWM recovery or boot to stock recovery in order to flash temp_cwm.

    Step 3 (optional)
    Increase the available space for apps from 1,2 GB, up to 3 GB !
    More Informations about the repartition: Post #3

    This step is optional, so if you don't plan to install a lot of apps you can skip this and go to step 4.

    flash cwm_cm11_partitions_layout.zip
    OR
    cwm_cm11_partitions_layout_sdcard_only.zip
    press several times the soft back-key, then tap
    "advanced"
    "power off"
    boot again to recovery
    mounts and storage
    format /system
    format /storage/sdcard0 as "vfat" [it's like FAT 32]
    Go back and "wipe data/factory reset"
    "advanced"
    "power off"
    Boot to cwm
    Go to step 5

    Step 4
    "mounts and storage"
    "format /system"
    format /storage/sdcard0 as "vfat" [it's like FAT 32]
    Go back and "wipe data/factory reset"
    "advanced"
    "power off"
    boot to recovery

    Step 5
    flash CM11 (GT-I8160_Support.zip already included)

    in addition for GT-I8160P (for the NFC model):
    flash GT-I8160P_Support_Vx.x.zip

    in addition for GT-I8160L (for the latin version):
    flash GT-I8160L_Support.zip

    Flash latest kernel:
    a2n_kernel_gt-i8160_4.4.4_sdcard_only.zip
    OR
    a2n_kernel_gt-i8160_4.4.4.zip

    Flash open-gapps

    Finally flash Swype_fix.zip

    Reboot system now

    Be patient, it takes around 5 minutes for the first boot.
    DONE ! :)


    I am not responsible for anything that happens after flashing the work provided here.

    Sharing is caring, so according to the (much unwelcomed) rule 12 you can use my open source on GitHub without my explicit consent or credits. But this is where the caring stops as I do not allow you to use any of my own provided files (except for unmodified stock files). Section 3 of this rule states that you can try to bypass my explicit consent by releasing it as your own when you succeed to make significant changes to the work, otherwise i'll report you and your thread will be removed.

    Credits

    @dh.harald and @hafidzduddin for contribution on codina sources
    @ Team Canjica for a base for this perfect kernel
    @ All users whose have tested this kernel and direct the development along the right path
    CyanogenMod Team for CM11 & CWM Recovery
    SAMSUNG for opening kernel source
    ST-Ericsson for codina patches
    Google for android kernel patches
    Linus Torvalds for Linux Kernel
    @S.AMU for FTP-Server

    Contributors
    ace2nutzer, cocafe, zwliew, mkaluza, Rox, Meticulus, ChronoMonochrome, TeamCanjica

    Source Code: Samsung_codina_Kernel/tree/4.4.4_cm11
    67
    Very sad to see that soo many users are left this Phone .. now when the kernels are running really good and now when i finally have updated NT-APP..... :( hmm...
    Maybe i'll try to build an final CM11 snapshot with EXTREME Code Optimizations based on this kernel if @ChronoMonochrome will help me :eek:

    btw: if this post reaches at least 50 "thanks", then i promise i'll do this definitely ;)
    59
    Buglist - R97
    • None
    Buglist - CM11 ROM 2022.03.05
    • Reading SIM contacts - but you can import contacts from sdcard ;)
    • Stock browser is outdated - please use Chrome browser

    Changelog

    A2N Kernel R97
    • CPU: removed input-booster (caused CPU to stuck @ max_freq)
    • Swap/zRam: increased LZ4 memory usage to 32 KB (fits in L1 cache)
    • Binary code optimizations - compiled with -O2
    • Quick boot

    A2N Kernel Control V97
    • CPU: removed input-booster (caused CPU to stuck @ max_freq)
    • Improved app startup
    • Fixed bugs

    Older Changelogs

    A2N Kernel R96
    • CPU/GPU: updated ondemand gov
    • CPU: added input booster (enabled by default)
    • CPU/GPU: updated OC driver
    • GPU: updated Mali driver to fix memory allocation failure
    • Fixed LCD driver bugs
    • Optimized memory management
    • Enabled zRam @ 75 % by default

    A2N Kernel Control V96
    • updated theme to my custom dark-mode
    • CPU/GPU: updated voltage control
    • screen: added LCD boost option to fix lags
    • better handling of restoring app settings
    • updated app defaults
    A2N Kernel R95
    • GPU: removed buggy gaming-mode
    • CPU/GPU: updated ondemand gov
    • CPU: added input-booster
    • RAM: optimized memory management

    A2N Kernel Control V95
    • GPU: replaced "Gaming Mode" with "Boost"
    • CPU: added input-booster into "Boost"
    A2N Kernel R94
    • RAM: Fixed regression from R93 in memory management
    • RAM: improved multitasking

    A2N Kernel Control V94
    • RAM: optimized zRam routine
    • Updated strings (help text)

    A2N Kernel R93
    • LMK: updated driver for better memory management - by me
    • LMK: updated minfree values to work more efficient with updated LMK driver
    • Init: removed init.d.a2n - instead we use now default init.d folder

    A2N Kernel Control V93
    • GPU: improved "Gaming Mode"
    • RAM: simplified swap control
    • Updated defaults & fixed bugs
    A2N Kernel R91
    • Source update - Linux 3.0.31 -> 3.0.101
    • CPU/GPU: disabled boost by default
    • GPU: added gaming mode
    • PLLDRR: set Freq from 1,1 GHz @ 1,0 GHz (1,1 GHz was not stable)

    A2N Kernel Control V92
    • Fixed bugs

    A2N Kernel Control V91
    • GPU: added gaming mode
    • CPU/GPU: Boost disabled by default
    Kernel R90
    • GPU: reverted block_size to 256KB (stock)
    • zRam: updated driver
    • PLLDDR_OC: improved stability
    • Reduced lags and crashes
    • Overall improvements (battery life, performance and memory management)

    A2N Kernel Control V89
    • Fixed bugs
    • Improved app performance

    A2N Kernel Control V88
    • Fixed bugs
    • Improved app performance
    Kernel R89
    • Updated LCD driver
    • Defconfig: disabled PCRYPT

    Kernel R88
    • Improved RAM OC

    Kernel 2022.10.14
    • Updated kernel config
    • CPU/GPU: updated governor, removed useless freq steps
    • Improved OC stability
    • Updated LCD driver - stability fix
    • Recalibrated LCD driver to fix out-of-sync related lags
    • RAM OC by default 800 MHz @ 1100 MHz for better I/O throughput

    A2N Kernel Control V8.7
    • Updated all performance profiles
    • Updated defaults
    • Fixed bugs
    • Improved app performance
    Kernel 2022.05.13
    • Enabled CONFIG_NAMESPACES support
    • Improved stability

    A2N Kernel Control V8.6
    • Debug: added "fix permissions" (useful if you use this app with other kernel manager apps)
    • Improved stability
    • Fixed bugs

    A2N Kernel Control V. 8.5
    • Improved stability
    • Fixed bugs

    Kernel 2022.04.20
    • Switched to HZ_500
    • Improved stability
    • Improved memory management
    • Improved multitasking
    • CPU/GPU: gov update
    • enabled namespaces
    • enable zRam 100 % by default

    A2N Kernel Control V. 8.4
    • Source update
    • Reduced startup time
    • Improved stability
    • Fixed bugs
    • Note: latest A2N kernel version required.

    Kernel 2022.04.06
    • Compiled with -O3 - for higher speed
    • Optimized memory management
    • Improved multitasking
    • Enabled CONFIG_SYSVIPC - required for some emulator apps

    A2N Kernel Control V. 8.3
    • Stability fix
    • Improved startup time
    • Updated defaults
    Kernel 2022.03.12
    • Fixed lags and freezes
    • CPU/GPU: updated ondemand gov
    • CPU/GPU: reduced Freq switching delay from 40 to 20 ms
    • RAM: optimzed memory management (multitasking)
    • LCD: updated Freq for S6D27A1 model
    • I/O: increased throughput - read_ahead_kb 32 @ 128 KB
    • zRam: updated script

    A2N Kernel Control V. 8.2
    • RAM: added page-cluster tunable
    • RAM: I/O: added read_ahead_kb tunable
    • Updated defaults
    Kernel 2022.03.05
    • Improved stability - needs some testing now
    • Fixed apps force close (at least on kernel side)
    • Improved memory management
    • Improved deep sleep
    • CPU/GPU: updated boost logic - uses now only min/max freq to reduce freq switching related lags ! (if enabled in the A2N app)
    • Charger control: update
    • LCD: updated driver
    • SWAP: zRam: sync with AK 3.10.106
    • Lib: sync LZ4, LZO & ZLIB with LK 5.16.2
    • Binder, lmk & ashmem: sync with AK 3.4
    • GPU: optimized memory allocation

    A2N Kernel Control V. 8.1
    • Network: added L2TP support
    • Re-added autostart
    • Updated defaults
    • Bug fixes
    • Improved stability
    Kernel 2021.10.29
    • Improved stability
    • Fixed apps force close (at least on kernel side)
    • Improved memory management - especially multitasking
    • CPU/GPU: optimized ondemand governors
    • Updated zRam driver
    • Disabled "CONFIG_RT_GROUP_SCHED" as suggested by Google AOSP upstream, for the proper handling of real-time tasks
    • Supports now NFS V.4.1
    • CIFS: updated driver
    • SELinux: optimized "fake enforce" hack
    • Updated kernel config

    A2N Kernel Control V. 8.0
    • RAM: LMK: added 16 MB choice,
      added "Swappiness" tunable
    • Slightly theme changes
    • Bug fixes
    • Improved stability
    • Reduced mobile data usage
    • Updated defaults
    Kernel 2021.05.22:
    • zRam: set to 50 % size by default
      improved driver
    • Memory Management: optimized low-memory-killer to have min 48 MB free RAM
      for quick response even if RAM is in high pressure state
    • SELinux: added ability to fake enforce status (experimental - in demo app)
    • CPU: updated ondemand gov for the better smoothness and battery life - up_threshold 95 by default
    • CPU: up_threshold=95 and disabled boost always fixed on suspend for more power saving
    • CPU: increased min_freq to 400 MHz, but on suspend it'll use 200 MHz for power saving
    • GPU: updated ondemand gov for more powersaving - up_threshold 95 - boost enabled
    • GPU: driver update for better memory allocations

    A2N Kernel Control V. 7.9
    • New: check for new A2N Kernel release on app launch
    • Updated defaults
    • Bug fixes
    • Removed redundant buttons
    • Reduced network traffic and debugging
    • Fixed wrong displayed "Kernel Outdated" popup

    Kernel 2021.03.24:
    • CPU: use 200 MHz step only with screen OFF
    • Set swappiness to 150
    • Some souce code update to android kernel 3.0.72
    • zRam, zsmalloc and lz4: update from LK 3.10.103 to 3.18.140
    • RAM: removed KSM support
    • Added more TCP congestion algorithm
    • defconfig: allow CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to be enabled
    • lib/lz4: update to LK 4.11.12 (for zRam)
    • zRam: decreased overhead and memory usage
    • Added support for kernel mode NEON
    • Added support for WQ_POWER_EFFICIENT
    • Added support for ARM/NEON optimizations for crypto in SHA/AES modes

    A2N Kernel Control V. 7.8
    • Profiles: Performance Plus: allow custom Freqs
    • Network: added more TCP congestion algorithm
    • Advanced Power Menu: update
    • Updated defaults

    Kernel 2021.02.06:
    • Swap: added more optimizations for zRam - easily 10x faster than before !

    A2N Kernel Control V. 7.7
    • Power: added "Maximum Charging Temperature"
    • CPU: added "Suspend Max Freq"
    • CPU/GPU: added more governor tunables
    • RAM: added "Low Memory Killer" (for min free RAM) & "Drop Caches & Buffers"
    • Power: added "Battery Temperature / Voltage Check"
    • Added a quick 4-way reboot menu
    • Stability fix
    • Updated defaults
    • Fixed grammar
    • Cleanup
    Kernel 2021.01.20:
    • GPU/GPU: updated ondemand governor
    • Source update
    • RAM: 631 MB @ 632 MB
    • CPU: switched to ondemand governor
    • Timer: HZ=300 @ HZ=250
    • Charger Control: added "Max Charging Temperature" default: 40 °C - range: 35 - 45 °C
      and set ac_curr_max=800 @ 1000 mA - range: 100 - 1500 mA
      also added better support for 3rd-party batteries with 3.7 V (auto detection)
    • LCD: driver update for stability and smoothness
    • Wi-Fi: added better support for 80211n
    • Full support for IPsec

    A2N Kernel Control V. 7.6
    • Source update

    CM11 ROM 2021.01.20:
    • Optimized build.prop
    • incl. A2N Kernel 2020.01.20 - normal version
    CM11 ROM 20200823:
    • Updated build.prop - improved dalvik heap
    • incl. A2N Kernel 20200823 - normal version

    Kernel 20200823:
    • RAM: optimized memory management
    • Extended Support for Mouse, Keyboard and Joysticks

    A2N Kernel Control V7.5
    • Source update

    Kernel 20200513:
    • RAM: optimized memory management
    • zRam: improved stability
    • init.d Fix
    • Updated Demo App installation

    A2N Kernel Control V7.4
    • init.d Fix

    CM11 ROM 20200328:
    • Updated build.prop - improved dalvik heap
    • incl. A2N Kernel 20200403 - normal version

    Kernel 20200509:
    • RAM: optimzed memory management
    • Enabled CRYPTO_SHA256 && CRYPTO_SHA512
    • init.d Fix
    Kernel 20200427:
    • RAM: optimzed memory management - especially multitasking
    • ABB-Charger: driver update
    • Binary Code Optimizations

    A2N Kernel Control V7.3
    • CPU/GPU: increased max up_threshold 99 -> 100 %
    • Updated defaults
    • Bug Fix

    A2N Kernel Control V7.2
    • Requests root permission on App startup
    Kernel 20200403:
    • Updated Kernel Config
    • PLLDDR OC: driver update
    • LCD: driver update
    • NET: enabled congestion protocols: cubic, new reno, bic, westwood+
    • SWAP: optimized zRam
    • BOOT: improved boottime - boots with 1 GHz
    • GPU: added a real dynamic governor for more powersavings
    • CPU: conservative gov update
    • CPU/GPU: added a "boost" tunable in order to switch from min to max freq immediately
    • RAM: optimzed memory management - especially multitasking
    • ABB-Charger: driver update

    A2N Kernel Control V7.1
    • GPU: allows to UV all steps
    • Profiles: added Performance Plus Profile
    • Network: added TCP Congestion Control
    • CPU/GPU: added Boost Control - in order to switch from min to max freq immediately
    • Updated defaults
    • Fixed back-arrow
    • Bug fixes
    • License Check: added Retry Button
    Kernel 20191114:
    • Optimized memory management
    • CPU/GPU/SXA: optimized Governors
    • Set vm_swappiness to 200 (patched)
    • Updated kernel config
    • FSB/DDR_OC: updated for lower power consumption and stability
    • Charger: Set AC Current to 800 mA by default
    • MCDE: LCDs: updated for quick wakeup + stability
    • Improved performance, responsiveness, and battery life
    • More smoothly

    A2N Kernel Control V7.0
    • Updated defaults and strings
    • Minor Fixes

    CM11 ROM 20190918:
    • Updated build.prop - improved dalvik heap
    • incl. A2N Kernel 20190918 - normal version
    Kernel 20191017:
    • VM: patched swappiness to be tuned up to 200 - (kernel default)
    • USB OTG Power: allowed output power 300 @ 500 mA
    • LCD's: increased stability against potential black-screen issues
    • LCD's: decreased wakeup latency from suspend
    • CPUFREQ: updated logic - auto set lower cpu_min_freq for suspend
    • updated ramdisk

    A2N Kernel Control V6.9
    • Misc: removed swappiness control (it's set @ 200 by default)
    • USB OTG Power: allowed output power 300 @ 500 mA
    • Minor Fixes
    Kernel 20190918:
    • CPU/GPU: updated governors
    • Charger: tiny update
    • Sweep2Wake: Fixed Touchscreen not waking up on incoming notification or call (if Sweep2Wake was enabled)
    • Mali-GPU-400: Fixed memory allocation failures - alloc_order 6 --> 0 / block_size 256 KB --> 4 KB
    • Re-added zRam Support with fast LZ4 Compressor
    • Set GPU/SXA governor up_threshold to 95 % for better powersavings
    • CPU: added a better control for managing CPU suspend_freqs - (for more info check the kernel release notes in the thread)
    • Bug Fixes
    • Source cleanup

    A2N Kernel Control V6.8
    • Misc: added zRam switch and
    • swappiness control
    • Full overhaul and
    • Bug Fixes
    Kernel 20190817:
    • Reverted back overclocked wifi module from 100 to 50 MHz - Caused system to freeze
    • CPU/GPU/SXA: updated governors to be more clean and smooth
    • Sweep2Wake: updated driver, added the ability to use it now even without extra wakelock
    • CPU: re-added the ability to set min_freq for screen ON regardless the used min_freq for Suspend (which is by default 200 MHz)
    • MCDE: added LCD workaround tunable to workaround wakeup issue on some broken LCD's. (it's useful if u've to press power button 3 times to wakeup the phone from suspend or deep sleep)
    • Source code cleanup - Fixed all leftover compiler warnings :)

    A2N Kernel Control V6.7
    • Power --> Charger Control AC/USB: allowed up to 1500 mA input Current
    • Screen --> Added ability to use Sweep2Wake even without extra wakelock
    • CPU: added ability to set min_freq up to 200 MHz for Screen ON
    • CPU/GPU: added ability to tune the governor for more performance or more powersaving (very easy to use)

    CM11 ROM 20190202 RELOADED:
    • Updated build.prop
    • incl. A2N Kernel 20190718 - normal version
    • AUTO wipe dalvik-cache
    Kernel 20190718:
    • CPU/GPU/SXA: updated all 3 Governors - should improve performance and smooth scrolling
    • KSM: reduced pages_to_scan for the first 2 scans - reduces some overhead on boot

    A2N Kernel Control V6.6
    • Power: fixed restoring of charging current on boot

    Kernel 20190619:
    • GPU: fixed a bug in dynamic_down_threshold logic
    • MCDE --> LCD's: updated drivers, improved stability especially for S6D Model (should fix the blurred screen issue)
    • fixed lags caused by MCDE/LCD
    • CPU --> conservative_gov: updated up and down thresholds to reduce lags caused by the governor itself
    • Installer: fixed issues with /ramdisk partition that caused Offline-charging (LPM) and FSB/DDR (PLLDDR) OC not to work properly
    • Reduced feedback latency
    • More smooth

    A2N Kernel Control V6.5
    • Audio --> Headphones: added digital gain control
    • Screen: removed LCD Freq Control (redundant)
    • CPU: removed suspend_max_freq limit (redundant)
    Kernel 20190521:
    • I/O: switched to CFQ Scheduler
    • cpufreq_conservative: updated to fix some micro laggs
    • PLLDDR_OC: fixed audio issues - re-added recal. of SXA Clocks

    Kernel 20190503:
    • MCDE: LCD's: improved stability
    • LCD S6D27A1: fixed Offline-charging Battery animation

    Kernel 20190427:
    • LCD WS2401: fixed wakeup issue when using PLLDDR OC
    • PLLDDR OC Module: update
    • CPU: conservative gov - update

    A2N Kernel Control V6.4
    • Screen: fixed restoring of ape opp 100 on boot
    • Screen: LCD WS2401: use 50 MHz by default
    Kernel 20190418:
    • GPU: Driver update - added dynamic_down_threshold for better power efficiency
    • CPU: gov conservative: added dynamic_down_threshold for better power efficiency
    • LCD WS2401: updated screen on/off delays - fix for LPM
    • LCD: fix user LCD Freq on late_resume
    • LCD: Driver update - improved stability, more smooth
    • LCD: added flicker-free support - by using highest LCD Freq + APE 100 requirement (to work stable)
    • FSB/DDR: updated Driver to work fine with 250/1000 MHz
    • I/O: Removed swap && zRam support - now we use KSM instead
    • BLN: Bug fix
    • Charger: changing charger current is now (again) possible "on-the-fly" (without to unplug the cable)
    • Rear Flash LED: updated Torch Brightness Control

    A2N Kernel Control V6.3
    • Power: updated Charger Control
    • Screen: updated LCD Freq Control
    • Misc: removed zRam (now we use KSM instead)
    • Misc: KSM: added "pages to scan" choice
    • Msc: updated FSB/DDR OC Control
    • Misc: updated Torch Brightness Control
    • Minor bug fixes and improvements
    Kernel 20190324:
    • MCDE: WS2401 Updated Delays - Fix for LPM
    • Kernel Config: tiny update
    • Updated Ramdisk and user Ramdisk
    • Moved LPM charger binary & /res/images/charger to user /ramdisk - allows to use custom charger binary and/or custom /res/images/charger

    Kernel 20190319:
    • Fixed "move apps to sdcard"
    • Enabled KSM Support - optimized for Android
    • Enabled UHID Support
    • Switched to Conservative cpu governor - higher powersaving
    • Updated Mali GPU Driver
    • Mali: updated gpu freq table for higher efficiency - removed too low steps
    • CPU: use 200 MHz Step only on Suspend
    • LCD: Reworked lcd type detection and split interface for each of lcd type
    • LCD: Recalibrated video.modes and LCD Freq - more smooth
    • LCD: fixed custom_lcdclk interface
    • Use: OPP 25% only on suspend
    • CPU: Conservative gov fine tuning
    • Optimized binary code optimizations - -O2 globally
    • Updated PLLDDR OC Module - improved stability
    • Reworked the whole VAPESEL2 & LPA(low-power-audio) Voltage Logic
    • Updated suspend_max_freq interface
    • Use the full Freq of 100 MHz instead the Half of 50 MHz for sdi1 as well - WLAN
    • BT: fixed file transfer issue
    • Disabled CRYP Engine - caused shutdown issue
    • Fixed Virtual memory layout
    • Disabled APEAT & APETRACE Clocks for Lauterbach Debugging - For powersaving
    • MCDE: re-enabled MCDE_DPI_UDERFLOW Patch
    • Updated Ramdisk and scripts

    A2N Kernel Control V6.1
    • Screen: Fixed LCD detection

    A2N Kernel Control V6.0
    • Misc: added KSM Control
    • CPU/GPU: updated Freq's according to the latest A2N Kernel
    • Audio: added LPA Undervolting - Low-Power-Audio on Suspend
    • Debug: removed LCD Type Detection - moved to "Screen"
    • Screen: added LCD Freq Control
    • Power: added 90% Charge - stop and hold charging at 90%
    • CPU: Suspend_max_freq: removed 200 MHz Choice - 200 MHz is the default min_freq on suspend
    Kernel 20190206:
    • Reverted "MCDE: WS2401: stock delays" - caused LPM issue
    • Charger: reduced time for 99% -> 100%
    • Updated ramdisk - use kernel default min_free_kbytes

    Kernel 20190202:
    • Reworked the whole kernel config
    • removed kmsg spam raw_soc from abb_fg
    • Android Kernel 3.0.31 -> 3.0.72
    • Improved Security
    • Minor bug fixes
    • Kernel Sched: enabled HRTICK
    • Mali 400 GPU: optimized driver
    • MCDE: WS2401: stock delays
    • Improved Memory management - Multitasking
    • Fixed memory allocation failures
    • Higher efficiency - Battery, Performance
    • Improved stability - No FC, no reboots
    • and some more tiny kernel optimizations

    A2N Kernel Control [GT-I8160] V5.9

    • Moved "storage" and "debugging" to the demo version
    Kernel 20181218:
    • FS: Revert to stock iocharset
    • Disabled Memory Resource Controller
    • Multitasking is now much better
    • Added Assistive Light Control for the LED Torch - Full Range from 1 - 16 !

    A2N Kernel Control [GT-I8160] V5.7

    • Misc: moved "advanced root" to the demo version
    • Updated App permissions
    • Misc: Added Assistive Light Control - Torch LED power Control

    CM11 ROM 20181023:
    • Optimized Dalvik heaps
    • incl. A2N Kernel 20181023 - normal version
    • AUTO wipe cache and dalvik-cache
    Kernel 20181202:
    • Charger: tiny fixes, reduced lowbat_wake_lock time

    A2N Kernel Control [GT-I8160] V5.4
    • Power: updated Charger Control, reduced max charge Current to 1 A.

    Kernel 20181117:
    • Charger: updated charger logic - set ac current max @ 700 mA by default,
      - improved security aka SIOP, - driver cleanup

    A2N Kernel Control [GT-I8160] V5.3
    • Power: updated Charger Control
    Kernel 20181105:
    • Charger: updated the whole Driver. - Relaxed a lot of limits to be able to charge up to 1500 mA Current for any Chargers AC/USB. - Added better support for 3.7 V (optimized for 1700 mA) 3rd-party batteries. - Better Support for very old Batteries from 2012 - 2013. - Refresh and recover some lost Battery power and update the Battery Gauge to Stock. - Driver Clean up .. removed useless sysfs interfaces and added new interface for checking actual real current drawn from the power source.
      - fixed also occasionally wakelock issues after unplugging charger cable (battery drain fix).
    • USB Gadgets power: set in kernel proper max drawn current to 300 mA
    • Charger: enable BLN on eoc_real instead of eoc_first if suspended (if enabled in the App or over init.d script)
    • MCDE / LCD: tiny stability fix for s6d27a1

    A2N Kernel Control [GT-I8160] V5.2
    • Power: Added Check (real) input Current Button
    • Layout update
    Kernel 20181023:
    • Charger: set ac_chg_current to stock

    A2N Kernel Control [GT-I8160] V5.1
    • Power: Adjusted AC Current to Stock
    • Layout update
    Kernel 20181012:
    • LiveOPP: 400Mhz Step: ape/ddr 25% @ 50% - this is
      useful for "Suspend Max Freq"
    • RAM: optimized memory management
    • Higher Performance, Better Battery lifetime and more smooth

    A2N Kernel Control [GT-I8160] V5.0
    • Audio: added Volume Control
    • Screen: added go to suspend button
    • Layout update
    • Fixed some minor bugs

    CM11 ROM 20180901:
    • Optimized Dalvik
    • build.prop tweaks
    • Fast boot
    • added ART Flags*
    • incl. A2N Kernel 20180901 - normal version
    • AUTO wipe cache and dalvik-cache
    Kernel 20181006:
    • MCDE: both LCD Drivers set in fail-safe mode for now - chuck norris mode
    • NET: xt_qtaguid updated to 3.0.72
    • Updated kernel config to 3.10 (specific for Android 4.4.4)
    • defconfig: enabled memory resource controller - saves up to 30MB/app
    • MALI: updated memory management - use 4kb block size
    • LIB: updated LZ4 Compressor Module to 4.4
    • BOOT: switched from LZO to LZ4 for faster booting (re-implemented)
    • RAM: updated memory management
    • Overall improvements - performance, battery and stability!

    A2N Kernel Control [GT-I8160] V4.9
    • misc: added swappiness control
    • misc/zram: removed reboot workaround for Android 4.1.2 - fixed in kernel
    Kernel 20180922:
    • Updated the following kernel drivers to 3.0.72:
    • drivers/gpu/ion
    • mm (basic memory management)
    • arch/arm/vfp (vector floating point and processor instructions)
    • drivers/hid/uhid
    • fs/fat
    • fs/ext4
    • block
    • drivers/block
    • drivers/staging/android: lowmemorykiller & binder
    • -
    • Added the following new drivers as needed by Android:
    • SYNC (Hardware mode)
    • SW_SYNC (actually disabled, because we're testing hardware-sync instead software-sync)
    • DMA_SHARED_BUFFER
    • -
    • Optimized memory management
    • Updated adj & minfree values
    • Set Swappiness=0 by default
    • Mali: optimized memory management
    • Removed some obsoleted drivers
    • Source cleanup
    Kernel 20180901:
    • Fixed Apps crash
    • MCDE: WS2401: improved stability
    • cpufreq: updated suspend_max_freq interface
    • Mali: driver update & fixed memory allocation failures
    • Tiny Kernel update & tweaks

    A2N Kernel Control [GT-I8160] V4.8
    • reduced overhead on boot

    A2N Kernel Control [GT-I8160] V4.7
    • GPU: removed mali_pre_allocated_mem_size_max - it's now 32MB by default
    • Screen: removed "Tuned Freq" & "Chuck Norris mode" - rebasing driver ....
    • Misc: added "Advanced Root" for CM11
    • Tiny Bug fixes
    CM11 ROM 20180809:
    • Fixed SafetyNet - Passed :eek:
    • SafetyNet will PASS even with root enabled like it's done on "Magisk" :D
    • Reworked the whole SuperUser implementation
    • Play Store: Phone is now "Certified"
    • incl. A2N Kernel 20180809 - normal version
    • AUTO wipe cache and dalvik-cache

    Kernel 20180809:
    • block/deadline-iosched: reset to AK3.0.72 and patched
    • Reworked all APE/DDR OPP requirements
    • PLLDDR OC Module: tiny updates - should fix boot animation failures when using it
    • Mali 400 GPU: reduced Voltages
    • Reduced also Voltage for LowPowerAudio
    • Cleaned Source
    • Updated EOC BLN
    • Updated BLN
    • Removed "sva" kernel wakelock - battery drain fix on suspend!
    • cpufreq: added suspend_max_freq interface
    • Use APE/DDR 25% OPP even for screen ON on idle
    • Reduced LCD Freq*
    • Fixed most of the compiler warnings for cleaner code
    • Updated Ramdisk in order to hide su binary - SafetyNet Fix
    * = "Tuned Freq" disabled means stock lcd freq and will work stable,
    but with enabled "Tuned Freq" it can cause some screen glitches caused by 25% OPP,
    on the other hand, lower lcd freq and lower OPP states will save a lot of battery power.

    A2N Kernel Control [GT-I8160] V4.6
    • misc: fix zram on 4.1.2 stock

    A2N Kernel Control [GT-I8160] V4.5
    • CPU: add suspend_max_freq control

    A2N Kernel Control [GT-I8160] V4.4
    • Fixed Support for GT-I8160L
    • Storage: Fixed compatibility
    • Misc/PLLDDR OC: fix restore on boot
    • source update

    A2N Kernel Control [GT-I8160] V4.3
    • Updated API to 28
    Kernel 20180711:
    • swap: improved zram
    • cpu: interactive governor sync to AK 3.4.67
    • i/o: deadline scheduler sync to AK 3.4.67
    • Fixed Kernel Headers
    • binder, lmk: sync to AK 3.4.67
    • mcde: updated lcd driver
    • disabled some tracing
    • updated ramdisk

    A2N Kernel Control [GT-I8160] V4.2
    • Screen: updated lcd freq stuff
    • use it ONLY with latest A2N Kernel

    A2N Kernel Control [GT-I8160] V4.1
    • Misc: added reboot dialog for pllddr oc
    • use it ONLY with latest A2N Kernel

    CM11 ROM 20180601:
    • Updated Dalvik Heaps
    • disabled "persist.sys.dalvik.multithread" - due of some race condition
    • incl. A2N Kernel 20180601 - normal version
    • AUTO wipe cache and dalvik-cache
    Kernel 20180615:
    • Updated "interactive" cpu governor
    • Mali-400 GPU: set down_threshold to 20%
    • CPU: set cpufreq_opp_delay to "0"
    • Higher efficiency

    A2N Kernel Control [GT-I8160] V4.0
    • CPU: added 400Mhz Step
    • use it ONLY with latest A2N Kernel
    Kernel 20180612:
    • Updated interactive gov
    • Higher efficiency
    • Real-Time Kernel
    • CPU: added 400Mhz step
    • updated /perf.profiles.rc
    • Updated ramdisk
    Kernel 20180601:
    • updated CPU/GPU Driver
    • cpu: added 600Mhz step
    • removed old workaround for powersave profile with 500Mhz
    • gpu: removed 250Mhz Step
    • updated interactive gov
    • updated /perf.profiles.rc
    • less battery draining - because of decreased cpu voltages and 600Mhz step
    • higher efficiency
    • Updated ramdisk
    A2N Kernel Control [GT-I8160] V3.8
    • Updated CPU/GPU/Profile stuff according to the latest A2N Kernel
    • Both CPU/GPU Undervolting control are allowed up to -200mV
    • swap/zram: use 1/2 of available RAM
    • use it ONLY with latest A2N Kernel
    A2N Kernel Control [GT-I8160] V3.7
    • removed SELinux control - since google don't want this
    Kernel 20180525:
    • updated android kernel config up to AK 3.10 - for the needed kitkat specific kernel options
    • full ipv4 / ipv6 support
    • enabled SELinux support in permissive mode
    • BLN: adjusted delays
    • switched to interactive gov :D
    • interactive gov: sync to Android kernel 3.0.72
    • interactive gov: disabled tracing
    • interactive gov: adjusted tunables for max performance and battery duty :good:
    • mali: pre_allocated_ram set by 16MB by default
    • RAM: re-added extra_free_kbytes tunable - improves real-time workloads
    • more smooth and responsive
    • Updated ramdisk

    CM11 ROM 20180524:
    • Enabled SELinux
    • Updated Dalvik Config (heaps) - once again :D
    • Lesser ram usage, more smooth and more stable
    • Fixed ramdom Apps FC by 99.99% :D
    • Updated NovaLauncher and BetterBatteryStats to the latest Version
    • removed OG-YouTube App - R.I.P.
    • incl. A2N Kernel 20180525 - normal version
    • AUTO wipe cache and dalvik-cache

    A2N Kernel Control [GT-I8160] V3.6
    • removed mobile data comp (enabled by default in kernel now)
    • re-added SELinux control
    • storage: add swap storages switch (available for normal kernel version)
    • adjusted some defaults
    Kernel 20180511:
    • RAM Management: Reverted Minfree Values to CM11 default
    • Final #3

    CM11 ROM 20180324 reloaded:
    • Updated Dalvik Config (heaps)
    • Lesser ram usage
    • incl. A2N Kernel 20180328 - normal version
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.5
    • AUTO wipes, except wipe data and format /system

    A2N Kernel Control [GT-I8160] V3.5
    • CPU: increased UV from -100mV to -150mV
    • Bug Fix
    Kernel 20180508:
    • Some Kernel tweaks - updated rcu config
    • RAM Management: Merged Minfree Values from S. G. S8 Oreo Kernel
    • Increased Stability
    • Higher Performance
    • Better Battery Lifetime
    • Final #2
    Kernel 20180405:
    • Sweep2Wake: fixed on LPM
    • Updated /ramdisk
    • Some Kernel tweaks
    • Final build
    Kernel 20180328:
    • Sweep2Wake: removed auto-enable if charger is present - was unstable
    • Fixed permissions on /ramdisk
    A2N Kernel Control [GT-I8160] V3.4
    • Re-added USB Power - ability to connected some gadgets to your phone (no otg)
    Kernel 20180324:
    • Fixed USB Driver
    • Updated kernel config
    Kernel 20180307:
    • Wifi: [re-added] reduced wakelock time of RX packet by half - thanks @ zwliew
    • Revert: "disable sia & sva wakelock" - caused reboot
    • [re-added] Fix "Dirty Cow" vulnerability - thanks @ Linus
    CM11 ROM 20180128:
    • Fixed PC USB Connection on a clean installation
    • Updated Dalvik Config (heaps)
    • Lesser ram usage
    • incl. A2N Kernel 20180128 - normal version
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.2
    • AUTO wipes, except wipe data and format /system
    Kernel 20180303:
    • Re-added USB Power Interface (output voltage to the usb port)
    • Reduced kernel size a bit
    • Disabled all the usb host & otg stuff (lack of proper driver)
    • Disabled tv-out feature (not supported)
    • Changed and updated Native Language Support to European Languages inlc. € (it's for properly showing file names)
    • Increased/Updated lpa/vape2 voltage - should fix wake up issues and improve Sound Quality (louder + cleaner)
    • Removed tunable "extra_free_kbytes" once again - it doesn't make things better :)
    • Re-enabled compaction-retry - forced compaction on high memory pressure to avoid oom
    • Updated ramdisk
    Kernel 20180222:
    • Abb-charger: tiny update
    • MCDE: Reverted previous update
    • Swap: re-added "backport zram code from LK 3.10.103" (zsmalloc - lz4)
    • Memory Management: re-added extra_free_kbytes tunable for more free RAM
    • HID: re-added UHID Support from LK 3.4.67
    • Disabled SIA & SVA Wakelock - Battery drain Fix!
    • Small Kernel updates and stability fixes

    A2N Kernel Control [GT-I8160] V3.3
    • Updated zRam Info Text - LZO @ LZ4

    A2N Kernel Control [GT-I8160] V3.2
    • Added new Button "Mobile Data Compression"
    • Adjusted CPU/GPU Voltages for higher Stability + better undervolting
    • Removed "usb-vbus power" Button
    • Bug Fixes
    • Stability Fix
    Kernel 20180128:
    • Source Code clean up - some left overs
    • Adjusted CPU Voltage show
    • GPU OC Stability Fix
    • Removed USB-Vbus power - driver clean up for OTG Support
    • Updated Touch Driver - stability fix
    • Reworked the full kernel config from scratch
    • Reduced Code Size
    • Optimized zRam
    • Enabled missing VPN - "TUN" Module (built-in)
    • Cpuidle driver - reverted some changes
    • Updated Memory Management
    • Updated Charger and Battery Driver
    • MCDE: Updated Delays for S6D27A1 - faster
    • Reduced black screens for S6D... on cwm + LPM
    • Added ability to change the LPM Battery animation (/ramdisk/charger/*)
    • Enabled TV-OUT Support - untested!
    • Updated ramdisk and various scripts
    • And many more tweaks
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.2
    Kernel 20171230:
    • Fixed Wifi Tether
    • Optimized Wifi Driver / disabled debugging
    • Compiled VPN L2TP Support Built-in
    • Reverted the high level memory management to stock CM11
    • Switched to deadline I/O Scheduler
    • Updated Kernel Config
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.1

    A2N Kernel Control [GT-I8160] V3.1
    • GPU: added ability to adjust mali-pre-allocated-memory-size

    CM11 ROM 20171230:
    • Removed "soft reboot" - (breaks wifi)
    • Removed some more debugging - (-DDEBUG)
    • Re-added OGYouTube6.apk :D
    • incl. A2N Kernel 20171230 - normal version
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.1
    • AUTO wipes, except factory reset
    CM11 ROM 20171213:
    • Re-added "Soft Reboot"
    • Disabled SELinux
    • Re-compiled with higher optimizations level
    • Higher Performance
    • incl. A2N Kernel 20171216 - normal version
    • Inkl. A2N Kernel Control [GT-I8160] Demo V3.1
    • AUTO wipes, except factory reset
    Cut ... It doesn't fit here ... too long ...
    34
    Useful Tips / FAQ

    Activate Developer Options

    Go to Settings ---> "about phone" and tap several times to "build number".

    3-Way Reboot Menu

    Go to settings ----> developer options and enable: "advanced reboot menu".

    Faster Animations

    in developer options set all 3 animator times from 1.0x to 0.5x.

    How to Setup SpiritFMFree

    Open SpiritFMFree app, go to setting ----> audio ----> method ----> "Galaxy S3/Note/S2_ICS"

    Changes After the Repartition

    cwm_cm11_partition_layout_sdcard_only.zip

    • The total space from sdcard0 will moved to /data - so that's why a real sdcard is mandatory here.
    • /data is 3 GB for apps - max. possible!
    • No problems with apps installations
    • No wasted space !

    cwm_cm11_partition_layout.zip
    • sdcard0 will be added with 1 GB size... and you're able to use also micro-sdcard (sdcard1)
    • /data is 2 GB for apps.
    • No wasted space !
    For reference purposes, the original partition layout has following setup:
    • sdcard0 is 1,1 GB
    • /data is 1,2 GB for apps
    • Some wasted space and too low free space for installing apps.

    How to Disable EOC(end-of-charge) BLN(backlight notification) for LPM(offline-charging) + Recovery

    Open "FileManager" ---> Settings ---> "General settings" ---> access mode --> "root access mode"
    go back and navigate to the root "/" open the file "user_lpm.rc" and check the content.

    The same procedure is for "user_recovery.rc" if want to disable it as well in recovery mode.
    Also there you can do other things like enable/disable sweep2wake or change the lcd brightness for LPM or recovery.

    FAQ

    Q: Is this Kernel 100 % Safe ?
    A: Yes.

    Q: Will this Kernel Overheat the Phone if I use Highest Settings ?
    A: No, you can't do anything wrong. Your phone has hard- and software overheat protection.

    Q: How to Revert all Changes Made by this Kernel ?
    A: Flash latest 3-parted stock ROM with ODIN.

    Q: How i can Tune this Kernel ??
    A: Everytime you install or update this kernel you will face an red (demo) app "A2N Kernel Control..." open this app, and it'll redirect you to Google Play to get the full version (blue app).

    Q: Can i use and Tune your Kernel with other Kernel Manager Apps ?
    A: Yes, but you need first to unlock kernel with the A2N app full version.

    Q: I've Installed the Full Version of the App, Will it Change any Kernel Settings by Default if i do not Change them ?
    A: No, default app settings = default kernel settings.

    Q: I've the Full Version of the A2N Kernel Control App, Do i still need the Demo Version of the App ?
    A: Yes, there are some special features in-app-menu like "Fake Enforce" and debugging features for easy bug reports.

    Q: How to Charge from 10 % to 100 % In just 1 h ?
    A: E.g. set "AC Current Max" and "Maximum Charging Temperature" to the Max.

    Q: Can i use your Kernel Control App with other Custom Kernels ?
    A: No, it's not universal kernel manager app.

    Q: My A2N App shows: "Please check your internet connection" - But i've good internet connection. - How to fix it ?
    A: Settings --> network settings --> use private DNS server like "dns.adguard.com" - confirmed to work by user @Arnz09 - see his post here.

    Q: My A2N App is Crashing after an Update, how to fix it ?
    A: Re-install it. If it doesn't help, wipe dalvik-cache in recovery.

    Q: How to Report Bugs ?
    - Please DO NOT report bugs if you are:

    --- using "unsafe" Freqs
    --- not using the latest release !
    --- not using Samsung stock ROM (based stock ROMs are custom ROMs !)

    A: Open the red A2N Kernel Control demo app and check in-app-menu (3 dots) then "Debug" and then on "logcat and dmesg" if you faced an app crash or if some features didn't work.
    If the phone rebooted randomly, then tap on "last_kmsg". You will find the logs in your internal storage. After that you can attach them here in your bug report, by clicking "Attach files".

    ROM:
    Kernel version:
    A2N app version:
    BUG:
    How to reproduce:


    BUG REPORTS THAT DO NOT FOLLOW THESE RULES WILL BE IGNORED !!!
    31
    New Builds are Up !!

    Changelog:

    20150714:
    • Dynamic gov.: Fine Tuning
    • LiveOPP: adjusted varm for 200Mhz step
    • Screen: re-enabled screen cast (screen cloning)
    • Some Kernel tweaks for more battery lifetime, especially for "powersave" profile
    • Fixed some minor sound glitches on screen off
    • LCD: WS2401: back again to 57Mhz and stock video.mode Values
    • Fixed all Wifi problems, also for fast-reboot
    • Charger: Revert some Values + Voltage Table to stock JB, but optimized and added full support for the 1700mA Battery + all 3rd-party 3.7V Batteries
    • More Smooth
    • Better Performance
    • Better Battery lifetime - Maybe :eek:
    • Clean Build

    ROM: 20150714
    CM11 based on CM Sources from 20141003; Changelog confronted on previous CM11 20150620 here
    • Fixed Calendar-Settings "FC"
    • incl. Ace2Nutzer Kernel Build: 20150714

    Download ROM:
    http://xda.mister-freeze.eu/XDA-files/ace2nutzer/CM11/

    Download GAPPS:
    HDPI_mini-gapps-kk-20150617-signed.zip - 34.06 MB

    Download Kernel:
    http://xda.mister-freeze.eu/XDA-fil...e2nutzer.kernel.4.4.x_20150714_codina.p.l.zip

    Status:
    http://xda.mister-freeze.eu/XDA-files/ace2nutzer/latest

    Notes:

    - Maybe this is our "final" Build ?!
    - Please test
    - report your Feedback
    - Press "Thanks"
    - And if u like consider to donate to me some Chocolates: :eek:

    https://www.paypal.com/uk/cgi-bin/w...63663d3faee8de6030e9239419d79c3f52f70a3ed57ec

    - Thank you ;)