[Stable][OTA]Oreo 8.1 Update [OPJ28.111-22-1][16 June 2019 IST]
- Thread starter rajatgupta1998
- Start date
Well... I've flashed it on my XT1642 reteu and everything went fine ?
But isn't there a world of difference? And I hope that if I do decide to try it, I would still be on the same software channel right?
I am retapac XT1642
Last edited:
As Of Now, we can't
---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------
Any Information About the Release of Source Codes?
Sad news everybody! At least for me, the problem with CTS Profile is real 
The first time i updated from nougat 7.0 to Oreo 8.1 i didn't noticed this problem at all as i still could download Critical ops from playstore but not Instagram and Candy crush friends as it says 'this version is not compatible with this device’ bc the CTS Profile fails. But after some time, i unlocked my bootloader and flashed magisk on Oreo 8.1, and everything was fine, i could download intagram and candy crush friend from playstore. But right now i'm back to locked bootloader and stock 8.1 final stable version wich i flashed via fastboot with the new fastboot version of Oreo, and the problem still exist even after a totally clean flash of the latest version of Oreo. my model is Moto g (4) XT1626 dtv. Can someone who has an g4 plus with locked bootloader and update via offical OTA confirm if this problem exist even in g4 plus version? Thanks in advance.
The first time i updated from nougat 7.0 to Oreo 8.1 i didn't noticed this problem at all as i still could download Critical ops from playstore but not Instagram and Candy crush friends as it says 'this version is not compatible with this device’ bc the CTS Profile fails. But after some time, i unlocked my bootloader and flashed magisk on Oreo 8.1, and everything was fine, i could download intagram and candy crush friend from playstore. But right now i'm back to locked bootloader and stock 8.1 final stable version wich i flashed via fastboot with the new fastboot version of Oreo, and the problem still exist even after a totally clean flash of the latest version of Oreo. my model is Moto g (4) XT1626 dtv. Can someone who has an g4 plus with locked bootloader and update via offical OTA confirm if this problem exist even in g4 plus version? Thanks in advance. Attachments
Sad news everybody! At least for me, the problem with CTS Profile is real
I also have an 'XT1626', and the CTS is normal.
Sad news everybody! At least for me, the problem with CTS Profile is real
I'm having the same issue, locked bootloader, flashed stock rom
Attachments
I had this problem but after clear data of playstore it show install button.Sad news everybody! At least for me, the problem with CTS Profile is real
Anyone has a "flashing phone on PC for dummies" ?
Never done this before and don't want to brick my phone, thanks in advance also for the ones who saved me from the 108 update
I have stock everything, never done any update except of putting files on root directory and forcing updates.
Never done this before and don't want to brick my phone, thanks in advance also for the ones who saved me from the 108 update
I have stock everything, never done any update except of putting files on root directory and forcing updates.
is there any way to have root + xposed in the oreo firmware of the moto g4 plus?
I installed the official firmware 8.1, I installed magisk 18.1 via twrp + buxybox v1.29.0 + Xposed Framework v90b3 oreo but when restarting the phone does not pass the logo therefore I had to erase the firmware via twrp and flash back to firmware oreo via fastboot and all good, fluid, I love it but I need root + xposed to hibernate the app and save battery....
I installed the official firmware 8.1, I installed magisk 18.1 via twrp + buxybox v1.29.0 + Xposed Framework v90b3 oreo but when restarting the phone does not pass the logo therefore I had to erase the firmware via twrp and flash back to firmware oreo via fastboot and all good, fluid, I love it but I need root + xposed to hibernate the app and save battery....
There's also a fastboot version now available https://xdaforums.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138Anyone has a "flashing phone on PC for dummies" ?
Never done this before and don't want to brick my phone, thanks in advance also for the ones who saved me from the 108 update
I have stock everything, never done any update except of putting files on root directory and forcing updates.
But this fastboot version requires PC, and that I've never done before, the tutorial seems pretty explained but I still have doubts othe process, do you have any links with further instructions for newbies?
The process is easy and written precisely. Did you read it? What further instructions you're looking for?
If you have further questions please feel free to ask here https://xdaforums.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
95Hello people so there is finally some good news. Moto has kept the promise after all and new stable build has been made available for you guys. It is Oreo 8.1 with December 01 2018 Security Patch.
Note: Newer build with build number OPJ28.111-22-1 is now available with Dec security Patch and audio fixes.
People who want fastboot flashable version of the firmware please visit that thread, linked below. This is the best method of flashing the stock firmware.
Disclaimer: I am not responsible for anything that happens as a result of flashing these files.
Downloads:
Stock ROM NPJS25.93-14-18 7.0 with April 01 2018 Security Patch: My Stock ROM thread
Lyu's TWRP: Her XDA thread
ROM downloads:
If you are on a totally unmodified system (N 7.0 NPJS25.93-14-18):
Blur_Version.25.236.3.athene.retail.en.US.zip
OTA_Package_OPJ28.111-22-1.zip
If you have installed TWRP or are on custom ROMs or have root and TWRP (whatever combo) there are two ways of flashing the latest build:
Method 1: Use the TWRP Flashable Builds created by @Jleeblanch . This will not remove your TWRP. Don't know about root yet.
Download and flash the OPJ28.111-22 TWRP flashable version in TWRP.
Method 2:
1. Flash stock N 7.0 via fastboot IF AND ONLY IF your bootloader version is BL1.06 or older. Don't try to downgrade. Else prefer Method 1.
2. Install the OTA file "Blur_Version.25.236.3.athene.retail.en.US.zip" via stock recovery/ADB Sideload or by placing it in your internal storage and granting Motorola Update Services Storage Permission and then Checking for Updates.
3. Install the file "OTA_Package_OPJ28.111-22-1.zip" by the same method as given in step 2.
For flashing updates using stock recovery:
Reboot to stock recovery. And choose update from SD Card. Choose the zip and install it.
For ADB sideload, check this guide by 9to5Google :
How to manually sideload an OTA update
Screenshots:
Check Attachments
Rooting Guide:
<Pending>
Credits:
Team Reviver
Motorola Mobility LLC
kosmas and Anurag Yadav for testing . :fingers-crossed:
All other people who test these builds
@strongst @Jleeblanch @echo92 and others who provide constant support29Ok guys, as promised. Here is the links to a TWRP flashable version of the Moto Oreo soak test. Links are both the same file, only provided one for AFH and G-Drive for convenience.
AFH: TWRP-athene-8.1.0-OPJ28.108.zip
G-Drive: TWRP-athene-8.1.0-OPJ28.108.zip
md5sum: c995bcb22215346e362195447de686f8
Instructions to flash:
- Download zip file (it is a large file as it's a full firmware zip minus the bootloader related items)
- Flash in TWRP recovery
- Reboot && Profit!
If you want to root, just simply flash Magisk in recovery immediately after flashing the zip. Or if you want to wait, you can flash Magisk at any time from recovery after you've set up. (NOTE: If Magisk Manager isn't installed after flashing Magisk, just download and install MM from here on xda).19Update to OPJS8.111-12
moto has released a new soak test update of android oreo 8.1 for Moto G4 Plus. Keep in mind that this is a beta build (yet official) and once you update through methods like stock recovery update/adb sideload or from update engine itself using the Motorola Update Services, you can't downgrade to a previous version. The build number of this update is OPJS28.111-12 and has 1 December Security Patch and requires you to be on fully unmodified stock N build number NPJS25.93-14-18 (April 01 2018 Patch) .
The following bugs are present as of now, maybe more:
Some Moto-Actions are extremely slow:
• Swipe to shrink screen
• Chop for Flashlight
• Pick up to stop ringing
• Twist for camera
NOTE: Users who have updated to the previous soak test builds, PLEASE DO NOT attempt updating/downgrading your devices. It is risky and can cause loss of data and hard bricks. Please wait unless we find a fastboot firmware of that version or something newer.
Users who have unlocked their bootloader, TWRP Backup and the TWRP flashable builds will be made available soon.
Download:
block_delta-Blur_Version.25.236.3-28.11.13.athene.retail.en.US.zip
MD5: 819ab7f90872a3c2af391bb71db40066
SHA1: e75a152813de155252f947f9aca4c75e98eb1d85
Sent from my OnePlus 6 using XDA-Labs.16Hey guys, I made a TWRP flashable zip from the ota zip files which will make it easier and safer for you guys to try out the latest Oreo soak test without needing to worry about not being able to downgrade (and possibly take the official ota update when it is released).
It's currently uploading as we speak and I will let you know when it's ready. I have personally tested this on my own device (Moto G4+ XT1644) and as far as I can tell, everything is working as expected.
What this means is you guys can simply flash the zip in TWRP and be good to go (much like a custom ROM [emoji6], but instead stock oreo). I've also made the zip safer by NOT including any bootloader related files which means, as I mentioned above, you can easily downgrade if you so choose to or if you happen to play around with mods, root, etc you will have an easy way to get back to a clean stock system.14
Oh, I created the flashable zip days ago. I was the one who caught the ota file this time [emoji6]. One of the ones I should say.
I just haven't updated my thread for the latest update yet, but posted the zip on Telegram some days ago.
Here is the download
-> TWRP-athene-8.1.0-OPJ28.111-22
I will update my thread asap with the new build for those that stalk there too [emoji2]
