[ROM][UNOFFICIAL][dreamlte/dream2lte][[SM-G950F/SM-G955F][9] LineageOS 16.0

Search This thread

Rhino42

Member
Mar 16, 2019
19
3
nanodroid?

hey there community,

first of all big thanks to the devs. really calms my mind to be on los and finally free of the big brothers.

Now I want to install Nanodroid, and I cant get it to work. When I try to flash the zip in twrp it results in an error (which I cant remember anymore, but it was sth simple like "this is not a flashable file" or "exited at line 4" or so? The same thing in magisk: this is not a flashable magisk file. I did the signature spoofing test, and it failed (red screen). I read that its important not to use gms-services before installing, I had Telegram and gcam (which crashes, obviously because of abscence of google play stuff:silly:(could have thought of that one)installed. Tried to clear data and cache of these apps, uninstalled, tried to install nanodroid again, failed again same errors. I also read in this thread, that only nanodroid patcher has to be installed. How do I do that, and also whats the procedure after that to get the rest installed? I also read some official nanodroid github readme, but I'm confused i.e. in the deodexing part and the preinstallation requisits, like is it totally necessary not to install any stuff except magisk after clean flashing of rom? Hoping for your help guys, thx in advance
 
hey there community,

first of all big thanks to the devs. really calms my mind to be on los and finally free of the big brothers.

Now I want to install Nanodroid, and I cant get it to work. When I try to flash the zip in twrp it results in an error (which I cant remember anymore, but it was sth simple like "this is not a flashable file" or "exited at line 4" or so? The same thing in magisk: this is not a flashable magisk file. I did the signature spoofing test, and it failed (red screen). I read that its important not to use gms-services before installing, I had Telegram and gcam (which crashes, obviously because of abscence of google play stuff:silly:(could have thought of that one)installed. Tried to clear data and cache of these apps, uninstalled, tried to install nanodroid again, failed again same errors. I also read in this thread, that only nanodroid patcher has to be installed. How do I do that, and also whats the procedure after that to get the rest installed? I also read some official nanodroid github readme, but I'm confused i.e. in the deodexing part and the preinstallation requisits, like is it totally necessary not to install any stuff except magisk after clean flashing of rom? Hoping for your help guys, thx in advance

I've got two S8s running on MicroG with little or no problems, I read here:


https://shadow53.com/post/unofficial-microg-zips/
and
https://shadow53.com/android/downloads/microg/
 

Wzza

Member
Mar 23, 2015
23
10
@nielowen
I'm very interested in running microg on my recently obtained s8. How did you manage to set it up? Are you using LOS? I've started messing around with samsung-based custom ROMs but most pie ROMs are odexed and I'm still focusing on getting signature spoofing. Also my attempts at removing google services have caused bootloops. Sorry for being OT but I feel it could be of help for others seeking a google-free ROM for their S8. Thanks!
 
Last edited:
@nielowen
I'm very interested in running microg on my recently obtained s8. How did you manage to set it up? Are you using LOS? I've started messing around with samsung-based custom ROMs but most pie ROMs are odexed and I'm still focusing on getting signature spoofing. Also my attempts at removing google services have caused bootloops. Sorry for being OT but I feel it could be of help for others seeking a google-free ROM for their S8. Thanks!

Yes, I'm running Lineage 16 from here. I first flashed LOS + Su add-on but NO Gapps; after installation finished I obtained Developer Options & set root access to Apps & ADB. I then flashed Magisk v19.3. After re-booting I installed the Riru - Core module in Magisk, rebooted, then installed Riru EdXposed (YAHFA) module. After rebooting I installed the Xposed Installer by DVDAndroid apk. From the XPosed installer I then installed FakeGapps v2.0 and, to assist with SafetyNet issues, HiddenCore Module v1.7.

After getting that far, I initially flashed Nanodroid from TWRP before discovering Shadow53's zips to allow choice of what applications and settings to install via NanoDroid (https://shadow53.com/post/unofficial-microg-zips/).

I must say that I found Shadow53's pages full of advice for which I remain very appreciative.

By the way, I have been trying out EteSync to sync contacts and calendars but I dare say that there are other ways.

I apologise if I've described the wrong steps somewhere above but it's getting late and I am tired!:(
 

tsky7

Senior Member
Feb 26, 2019
67
20
Yes, I'm running Lineage 16 from here. I first flashed LOS + Su add-on but NO Gapps; after installation finished I obtained Developer Options & set root access to Apps & ADB. I then flashed Magisk v19.3. After re-booting I installed the Riru - Core module in Magisk, rebooted, then installed Riru EdXposed (YAHFA) module. After rebooting I installed the Xposed Installer by DVDAndroid apk. From the XPosed installer I then installed FakeGapps v2.0 and, to assist with SafetyNet issues, HiddenCore Module v1.7.

After getting that far, I initially flashed Nanodroid from TWRP before discovering Shadow53's zips to allow choice of what applications and settings to install via NanoDroid (https://shadow53.com/post/unofficial-microg-zips/).

I must say that I found Shadow53's pages full of advice for which I remain very appreciative.

By the way, I have been trying out EteSync to sync contacts and calendars but I dare say that there are other ways.

I apologise if I've described the wrong steps somewhere above but it's getting late and I am tired!:(


You could also use the NanoDroid Patcher too for signature spoofing and for just micog and nothing more you could use the NanoDroid Aroma Setup
 

pcpilot1950

Member
Oct 24, 2014
7
3
Lineage os 16 bluetooth issues

I recently installed TWRP, Magisk Root & Lineage Os16 on my Samsung Galaxy S8 SM-G950F Exynos. Everything works like a dream, except for Bluetooth Phone calls in my car. The phone pairs with the car ok and the system dials the number ok, but there is no audio, just crackling noises. Is this a known issue and is there a fix. Actual firmware is: lineage_dreamlte-userdebug_9_PQ2A190305002.
 

pcpilot1950

Member
Oct 24, 2014
7
3
I'm not quite sure what you mean by usage, but the battery seems fine and runs for a couple of days between charges.
 

bl4dy_pt

Senior Member
Oct 7, 2012
77
10
I recently installed TWRP, Magisk Root & Lineage Os16 on my Samsung Galaxy S8 SM-G950F Exynos. Everything works like a dream, except for Bluetooth Phone calls in my car. The phone pairs with the car ok and the system dials the number ok, but there is no audio, just crackling noises. Is this a known issue and is there a fix. Actual firmware is: lineage_dreamlte-userdebug_9_PQ2A190305002.

Fix for Bluetooth?
 

pcpilot1950

Member
Oct 24, 2014
7
3
Is there a way to fix the absence of audio when using the phone in the car on Bluetooth Audio, which has only occurred since the installation of Lineage Os16?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 225
    2okPze5.png

    LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.


    What doesn't work :

    Instructions :
    • Download the latest build and gapps
    • Reboot to recovery
    • Flash the latest build and gapps
    • Reboot

    Downloads :

    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
     
    Did you--
    wipe:
     restore with titanium backup:
    reboot after having the issue:
     
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
     
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:


    XDA:DevDB Information
    [ROM][UNOFFICIAL][dreamlte/dream2lte][[SM-G950F/SM-G955F][9] LineageOS 16.0, ROM for the Samsung Galaxy S8

    Contributors
    Stricted, Ivan_Meler, Vaughnn
    Source Code: https://github.com/exynos8895

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 4.x
    Based On: LineageOS

    Version Information
    Status: Alpha

    Created 2019-02-13
    Last Updated 2019-11-02
    72
    Here is a little teaser of thats comming, There is no serious regression so far from what we can tell (Camera needs to be fixed again tho but not that big of a deal as i had to deal with that on s7 too)

    SalupTl.png
    71
    new build is up, synced with los source and updated security patch level, this build also has a working mobicore, and fingerprint sensor
    gatekeeper and keystore are also working now, a lot of other bsp side stuff has been updated, Button backlight has been removed from settings, Bixby button can be remaped from settings again, There are a lot more under the hood changes but next build will have even more of them (Including working HWC) Moreover next build will also move to pie kernel and mali gpu drivers, Any donations to stricted or/and me are wlecome as they help us with build server cost and maintanance anyway enjoy the build and prepare for big updates soon

    Also note8 builds with working fp are coming a bit later as im waiting for someone to test them
    60
    there seems to be a reason as to why they are using older gpu drivers as i just compiled the kernel with gpu drivers from latest stock kernel it booted fine and even displayed 1 frame of lock screen but than went black although i could still double tap power to open camera than use volume keys to take pic and it would make a sound so the phone was still on for sure EDIT: link to the kernel if anyone wants https://drive.google.com/open?id=1zuaQIEGfF_AR4xorB8bE2q_q47upWtR0

    Looks to me like you are using same old driver r3p0 so please stop sharing misinformation (There are multiple parts to mali userspace and kernel you didnt update either and even if you updated kernel alone it wouldnt work as you didnt update userspace, if anyone wants to confirm this is same old r3p0 driver just run strings on file and grep for r3p0)

    As a quick progress update i got a device few days ago (big thanks to @marshedpotato) i already started working on a big update (Fingerprint, updated graphics drivers possibly hwc too which i just fixed few days ago on galaxy s7 making it first exynos device to have it working on pie aosp) this will be quite a big update so please dont ask for etas (Ill also probably replace back glass and display since it has missing chunk haha) in the other news while playing with the device i managed to activate IR led used for iris scanning and i could possibly reuse it for face unlock if thats anything people would like to see
    57
    Expect release of pie on monday, I still want to look into issues with how macloader handles murata chips on stock compared to our implementation but coming from 15.1 there is no regression at all