[Guide] Sprint/Verizon Galaxy SIII Flash to Page Plus Cellular Tutorial [Video]
- Thread starter Nevell
- Start date
- Status
do you I need to have it set to Mob+simple or just Simple? when I set it to mobile+simple i get the error 67, but when i set it to just simple i get nothing at all. my active profile is 1 and i have both profiles 0 and 1 setup the same with correct HA keys and AAA keys. I also have only 2 profiles. I did a epic touch just like this and it worked just fine. any help would be greatly appreciated.
Uncheck profile 1. Set your network type to cdma only in the cdma drop down on cdma ws. This is assuming your on the Sprint version.
Sent from my SPH-L710 using Tapatalk 2
I did everything u said to the T and still nothing at all. I got 2 profiles ( 0 and 1) 0 is the active now with ha and aaa keys , 1 is there but not active it also has the ha and aaa keys. its set to mobile+simple and in the drop down in cdmaws i got it set to cdma only. do i need to change anything inside phoneinformation (*#*#4636#*#*)? or hdr/1x selection because it is set to cdma only also instead of hybrid. also note this is a sprint one on ICS
Sprint ones have to be set to Simple only and it won't take the shared secrets. So, you have to use vzw as the shared secrets and pass. That's why the 3G won't work on the Sprint one. Can't read the efs file system for the 10.key and a host of other stuff.
Last edited:
Thought you were going to Page Plus. If your on VZW Prepay then you need a whole new method of which is against the rules here. Lol
ya i'm having the same issues. i can't seem to write the HA, or AAA keys (that i got from my fascinate s1), or they wont stick. i've got talk and text working, just not the data. and the same goes for my fascinate, i cant seem to get data on that phone either.
are you saying i'm screwed with this set up? i'm invested 50$ in verizon prepaid (and another 50$ card already bought, long story), and a 30$ fascinate for the dmu, ha, aaa donor. please tell me this can work with sprint s3 and verizon prepaid with 3g data!!
also, would you know how to port over a number in DFS? or how about in CDMA WS 2.7? i have existing tmobile number i want to port in. and also, do i have to change the data setting with newported#@vzw3g.com on all the PPP HDR etc?
I'm no saying that its not possible. I'm saying I can discuss the details on how its done due to forum rules. Sprint Galaxy S3 is much harder for me to get to work properly with 3G on Big Red.
SMH!!!
im stuck on the same part on the s2m just talk and text work!!! Bigred just wont let the data flow. Somebody please help.
im stuck on the same part on the s2m just talk and text work!!! Bigred just wont let the data flow. Somebody please help.
If someone wants to donate me the their Sprint gs3 and donor phone to test on for big red? Mine is on contract with Sprint not testing on it.
Sent from my SPH-L710 using Tapatalk 2
Sent from my SPH-L710 using Tapatalk 2
Last edited:
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
38I No longer support this thread due to the lack of time I have lately. This video will show you how to get up and running on P+ with 1x data only.
This wil work for the Sprint, Verizon and US Cellular variant.
Yes I can get 3G but, the method is not allowed on this forum.
Please don't PM me asking how to get 3G as I will not reply.
Hit thanks if you watched this video please
5About d*** time!
okay so i finally got everything working on my SPRINT Galaxy s3 flashed to PAGEPLUS with mms. here goes:
this is for the Sprint GS3 I repeat the SPRINT one Not the Verizon one. Write everything without reading from the phone with the full version
of CDMAWS.
I was on stock rooted jellybean 4.1.1 with LG2 radio with spc changed to 000000.
I did absolutely nothing with the DMU folder or akey (never have for any phone i flash to be exact) but if u did remove it, flash back to stock with
odin if u have to.
Set the mode pref to "CDMA HDR and LTE only" under the CDMA tab in CDMAWS. (if u dont u will get nothing but error 67 messages)
under the EVDO tab make sure both profile 1 and profile 0 are enabled with profile 1 as
the active profile, plug in the correct username and dun username with
ha and aaa keys for both profiles "mirrored them = make them the same".
set mobile IP behavior to Mobile + simple.
under the Data tab make sure Data QNC is checked/enabled.
IF YOU NEED YOUR HA or AAA keys for PagePlus or VZWPP PM ME!
MMS and Youtube streaming:
go to dialer and dial ##3282#, tap edit and enter SPC (mine is all zeroes now) click others then click MMSC URL change it to
http://mms.vtext.com/servlets/mms (make sure it looks exactly like that or ur MMS wont work). back out and tap Multimedia change the fields to this:
RTSP proxy Address: 0.0.0.0
RTSP proxy port: 0
HTTPPD proxy address: 0.0.0.0
HTTPPD proxy port: 0
back all the way out and restart ur phone if it doesnt reset automatically. Once your phone is back up download GoSmsPro from the PlayStore.
open it up and go to settings and under advanced go to MMS Settings. Scroll all the way down to the last field and check mark "Fill APN configuration manually". change the MMSC field to http://mms.vtext.com/servlets/mms back all the way out and restart your phone again and enjoy 3g, with MMS and youtube/video streaming.4
Yes but some US Cellular phones don't have to be put in NV because they already are.
This is the US Cellular GS3 16 digit code and its what I use on the USCC Note 2
2010031619780721
Let me know if it works.3
Upload failed because I left and laptop went to sleep. Its almost done now though @ 92%
New posts
-
-
-
Development [ROM][A14][Pixel 7 Series] MATRIXX-v10.4.2 [GAPPS][04.19.2024]- Latest: nikhil007mmus
-
Themes / Apps / Mods (Magisk Mod) Google photos unlimited back up.
- Latest: pawelmiernik
