[ROM] Touchwiz [4.4.2] [NA1] Leak

Model: GT-I9505
Country: Open Europe
Version: Android 4.4.2
Changelist: 276328
Build date: Thu, 2 Jan 2014 23:30:51 +0000
Product Code: OXA
PDA: I9505XXUFNA1
CSC: I9505OXAFNA1
MODEM: I9505XXUFNA1
Download: I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_OXA.zip

NOTE
- You are doing this at your OWN risk. I am not responsible if you brick your device or your cat eats your phone.
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware is a pre-release build and not official from Samsung.

INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5 to AP
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

[SOURCE: http://www.sammobile.com/2014/01/10...kitkat-test-firmware-for-galaxy-s4-gt-i9505/]

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Now Rooting
-This may or may not void your warranty or increase your flash counter
-- You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.



INSTRUCTIONS

Step 1 - Download CF-Auto-Root Android 4.4.2 Package with SuperSU fix (check the link above) for Samsung Galaxy S4 to computer and extract the zip file.

Step 2 - Download ODIN v3.07 which is needed to root Android 4.4.2 on Galaxy S4 I9505.

Step 3 - Switch OFF the phone and boot it into Download Mode. To do so, press and hold Volume Down and Home buttons together, and then tap Power button until the construction Android robot with a triangle icon appears on screen. Hit the Power button again to confirm entry into Download Mode.

Step 4 - Launch ODIN on computer and connect your phone to it while the phone is still in Download Mode.

Step 5 - When the phone connects successfully, one of the ID: COM boxes will turn yellow with the COM port number. This process may take some time. So, leave it alone.

Step 6 - Now select the file that needs to be flashed or installed on your phone, which can be found among the extracted files in Step 1.
Click on 'PDA' and select the file 'CF-Auto-Root-jflte-jfltexx-gti9505.zip'.

Step 7 - In ODIN, enable Auto Reboot and F. Reset Time options. But, leave all other options at their default settings.

Step 8 - Click Start button in ODIN and let the installation process begin. It should take just a few minutes to complete.

Step 9 – Once the root installation is done, your phone will reboot into Recovery Mode automatically and install the root package files. At this moment, the ID: COM box will also turn green.

Step 10 – Finally, when the home screen boots up, just disconnect your phone from computer.

NOTE: In case the device fails to boot into Recovery Mode automatically (as given in Step 10) or cannot root your device, repeat the entire procedure again.

OPTIONAL: If the issue still persists, repeat the entire tutorial. But, ensure that the Auto Reboot option is unchecked. Then after installation (Step 10), do the following:

Step 11 - Remove battery to Power off the phone forcefully.

Step 12 - Now boot the phone into Recovery mode manually by tapping Volume Up, Home and Power buttons. This will initialize the root process on your phone.

Your Galaxy S4 is now rooted on I9505XXUFNA1 Android 4.4.2 leaked test firmware. Check for SuperSU app in your apps list to verify if root is installed correctly.



[SOURCE: http://www.ibtimes.co.uk/root-galaxy-s4-i9505xxufna1-android-4-4-2-leaked-test-firmware-1431883]

[I can not be held responsible for anything that may or may not happen to your device. ]

DJ SNap said:

I bet it has new (Konx) bootloader. Am I right?

Click to expand...

Click to collapse

... Not sure, I should have an answer for you within the next hour or two due to my bootloader already being voided with the 4.3 one.

Sent from my SGH-M919 using XDA Premium 4 mobile app

DJ SNap said:

I bet it has new (Konx) bootloader. Am I right?

Click to expand...

Click to collapse

Without it rooted, according to samsmobile it does not trip thr flash counter, it is unknown if it will if rooted.

Sent from my SGH-M919 using XDA Premium 4 mobile app

arnes_king said:

Hey people, is it possible to make a cwm flashable ZIP of this without changing anything?

I would like to try to dual boot it as second rom with my 4.4.2 GE rom

Click to expand...

Click to collapse

It wouldn't fit on ur system partition if u didn't delete stuff.

Sent from my SGH-M919 using XDA Premium 4 mobile app

Werewolf88 said:

screenshots are there at the bottom of the page http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/

Click to expand...

Click to collapse

..also on first page

arnes_king said:

Thanks for your reply but i have almost full 2 GB of free space on system partition, wouldn't that be enough?

Click to expand...

Click to collapse

2gb free with both gapps and ge installed?? is there something you're not sharing?? haha, jk ...Im saying to put gapps, ge, tw all on the system partition, you wouldn't have enough room unless you del some stuff.