[ROM][8.1] crDroid v4.6.1 [29.09.2018]

Search This thread

gwolfu

Recognized Developer
BE3pE0l.png

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned

Statement
Please note that the current state of this project is labeled as "TESTING".

Introduction:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.

Instructions:
Pre-installation:
  • TWRP of course (Download from here)
  • Magisk can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
  • Backup your data to PC, OTG flash drive
  • Flash recovery (TWRP) downloaded from above link and boot to recovery
  • Wipe system, data, cache (maybe format data also), then reboot to TWRP
  • Copy ROM base and Gapps, then flash them in TWRP
  • Reboot and enjoy :)
Update installation:
  • Boot to TWRP and make a backup
  • Flash updated ROM base and Gapps (and Magisk if you had this as root method)
  • Reboot and enjoy :)

Download:
ROM base: https://sourceforge.net/projects/crdroid/files/beryllium/4.x/
Gapps: https://opengapps.org (I'd suggest nano)
Changelog: To be added

Known isues:
- waiting for feedback

Visit official website @ crDroid.net
crDroid Community Telegram

If you like my work, consider a donation!

XDA:DevDB Information
[ROM] crDroid v4, ROM for the Xiaomi Poco F1

Contributors
gwolfu
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x

Version Information
Status: Testing

Created 2018-09-29
Last Updated 2018-09-29
 

$hivaM Manav

Senior Member
Jun 26, 2014
73
61
Razhok'
**Reserved**
Boots up.
CR droid boot animation is sick! Loved it.
Of course as title says it's in alpha "testing" so constant system UI crashes upto the point where the screen completely goes black.
One thing I liked about this build was the resolution looks good UI and stuff (got all this just by looking the pre Google setup screen) All the other ROMs I tested has bad resolution and the screen is just not satisfying but not in this rom!
Waiting for stable build. Like.
 
Last edited:

ajayruchi

Member
Apr 5, 2017
48
22
Force close not able to run for a single minutes:crying:
 

Attachments

  • Screenshot_Pixel_Setup_20180929-215701.png
    Screenshot_Pixel_Setup_20180929-215701.png
    80 KB · Views: 1,240

WingXBlade

Senior Member
Dec 16, 2014
76
21
Kuala Lumpur
Unfortunately, the thing happened to other ROMs is also on this ROM. I can't get it to boot after flashing, never got to the setup screen.
 

ConradB

Senior Member
May 31, 2008
296
80
Unfortunately, the thing happened to other ROMs is also on this ROM. I can't get it to boot after flashing, never got to the setup screen.

Just an idea.
We had such a problem with Redmi 4x, after removing the Simtray before first boot the problem was solved.
 
Last edited:

gwolfu

Recognized Developer
System UI force close some times, this is a great build but is "alpha" for me, so i go to try RR, PE and AEX, Lineage is the one works fine for me.

Yeah this is testing not even alpha
Waiting for the phone to drop at my place so that I can work around on some bugs
 

Top Liked Posts

  • There are no posts matching your filters.
  • 35
    BE3pE0l.png

    Code:
    *** Disclaimer
    I am not responsible for any damage you made to your device
    You have been warned

    Statement
    Please note that the current state of this project is labeled as "TESTING".

    Introduction:
    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.

    Instructions:
    Pre-installation:
    • TWRP of course (Download from here)
    • Magisk can also be used just make sure you flash it after a first successful boot (after passed setup screen)
    First time installation:
    • Backup your data to PC, OTG flash drive
    • Flash recovery (TWRP) downloaded from above link and boot to recovery
    • Wipe system, data, cache (maybe format data also), then reboot to TWRP
    • Copy ROM base and Gapps, then flash them in TWRP
    • Reboot and enjoy :)
    Update installation:
    • Boot to TWRP and make a backup
    • Flash updated ROM base and Gapps (and Magisk if you had this as root method)
    • Reboot and enjoy :)

    Download:
    ROM base: https://sourceforge.net/projects/crdroid/files/beryllium/4.x/
    Gapps: https://opengapps.org (I'd suggest nano)
    Changelog: To be added

    Known isues:
    - waiting for feedback

    Visit official website @ crDroid.net
    crDroid Community Telegram

    If you like my work, consider a donation!

    XDA:DevDB Information
    [ROM] crDroid v4, ROM for the Xiaomi Poco F1

    Contributors
    gwolfu
    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 4.x

    Version Information
    Status: Testing

    Created 2018-09-29
    Last Updated 2018-09-29
    10
    System UI force close some times, this is a great build but is "alpha" for me, so i go to try RR, PE and AEX, Lineage is the one works fine for me.

    Yeah this is testing not even alpha
    Waiting for the phone to drop at my place so that I can work around on some bugs
    3

    Are you guys dumb or what? No custom rom will be having face ir unlock as none of them have the sources included :eek:
    2
    just asking, wow. huge respond for small question, are u always that rude?

    Sometimes.. when too many people ask same question on every thread without reading the op's 1st post where usually everything is written what's working and what's not.
    Just like "Is volte working :confused:"
    For poco everyone is asking about IR without reading. If it was working the op would have written about it but this rom is in alpha stage so it is obvious.
    1
    Nice to see @gwolfu here! I came from S7 forums. Was on crDroid back then. Excited for developments on this ROM.