[RELEASE][PERMISSIVE][Kernel] Samsung Galaxy Grand Prime SM-G531F

TheSMGCraft · Nov 24, 2016

--------------------LINK UPDATED--------------------
Hello, Dadziok Finished This Job
Thanks to DadziokPL
WARNING!: This will Trip Knox Flag
WARNING!: Your Warrenty is now Void!
[FIRST] RELEASED CUSTOM KERNEL FOR THIS MODEL!
Changelog:
1.0 First Release
[1.0]
+Default SELINUX Mode on Boot = Permissive
+Recovery Selinux Mode = Enforcing (use setenforce 0 to get Permissive, If you Installed latest TWRP made by DadziokPL)
+You Can Change Selinux Mode Between Enforcing/Permissive
+Glitched Init.d Support
+/SYS Access Require Explorer that support modifying it!
- You Need FRP Lock OFF or you'll get Custom Binary Blocked By FRP Lock (if you installed Custom Kernel with FRP Lock Enabled by mistake, flash this boot.tar.md5 using odin Download Link: http://bit.ly/2ndKRii to save your phone from brick then after this, disable frp lock, and then you can install Custom Kernel)

[GUIDE] How to disable FRP Lock Re-enabling after add google account.

Download Kernel Here : http://bit.ly/2kzUtRd
Hint: Press Pobierz boot.tar.md5 to download

FRP Lock Disable With Google Account: http://bit.ly/2gPweiq
You Need to Install Modified By Me Google Play Services Attached to Guide. Latest Update Google Play Services Patches FRP Lock disable guide, You need to install .APK that i attached to guide

Disable KNOX: http://bit.ly/2gFiiEM
Flash This ZIP using TWRP To remove Knox. If it don't remove SecurityLogAgent you need to Freeze it or remove using Root App Uninstaller. otherwise you will get knox notifications. "Unauthorized Actions Has Been Detected"

Dadziok Screenshot Translate (Dozwolone = Permissive)

Press Thanks Button to DadziokPL and Me(TheSMGCraft)

chaudharyjatin115 · Nov 24, 2016

We are waiting for it

Sent from my AO5510 using Tapatalk

likakos · Nov 24, 2016

waiting!..

fabiossilva21 · Nov 24, 2016

Good luck... it is a pain in the ass to develop a kernel for this variant... the one I'm using took me 2 days to make

TheSMGCraft · Nov 24, 2016

Yeah...

fabiossilva21 said:
Good luck... it is a pain in the ass to develop a kernel for this variant... the one I'm using took me 2 days to make

It Can Took Long. No One was working on this model. well after i finish. Knox Flag Will Be Tripped. This Will Void Your Warrenty.
After i finish this kernel, maybe other developers will start working on it too.

fabiossilva21 · Nov 24, 2016

Were you able to extract the boot.img?
And make a kernel that boots?

dadziokPL · Nov 24, 2016

Guys, I made a kernel without SELinux forced to enforcing, call it the first custom G531F kernel

Get it from my ownCloud, and flash with Odin. Make sure FRP Lock is off
http://46.101.206.213/index.php/s/1qAfN3faf1qep2g

TheSMGCraft · Nov 24, 2016

Kernel Finished!

likakos said:
waiting!..

Hey, Kernel Is Finished. Before Flashing READ DESCRIPTION ! IT'S IMPORTANT!

PiotrK3 · Nov 24, 2016

Thanks!

GoodJob. Kernel Work Perfectly.
Init.d Work and i can tell yes it's glitchy
Everything Works Fine.
Thanks To:TheSMGCraft,DadziokPL!

Labestiajaker · Nov 24, 2016

Great work

Enviado desde mi SM-G531F mediante Tapatalk

TheSMGCraft · Nov 24, 2016

Labestiajaker said:
Great work

Enviado desde mi SM-G531F mediante Tapatalk

Enjoy It.

MikeAlmonte · Nov 25, 2016

Thank you very much for this awesome work I hope you will make Cyanogenmod For this variant too looking forward..anyways thank you for the custom kernel God bless

TheSMGCraft · Nov 25, 2016

MikeAlmonte said:
Thank you very much for this awesome work I hope you will make Cyanogenmod For this variant too looking forward..anyways thank you for the custom kernel God bless

Well i have made with DadziokPL this kernel i don't wanted to wait until someone make it. so i made it with DadziokPL. i Hope You Pressed Thanks! Button. Have Fun

UMS Work Using Some Explorers that Require Kernel Access Will Allow You to Modify /SYS files

MikeAlmonte · Nov 25, 2016

TheSMGCraft said:
Well i have made with DadziokPL this kernel i don't wanted to wait until someone make it. so i made it with DadziokPL. i Hope You Pressed Thanks! Button. Have Fun UMS Work Using Some Explorers that Require Kernel Access Will Allow You to Modify /SYS files

Thank you so much??

TheSMGCraft · Nov 25, 2016

MikeAlmonte said:
Thank you so much

That Guy Who Says Works Perfectly. Hiding Selinux Status

I Updated Link. Open Link Wait 5 Seconds Press SKIP AD and This will Start Direct Download! Enjoy it, Use Viper4Android or UMS Enabler. Without Limited Access
I Recommend Selinux Mode Changer to Change Between Enforcing and Permissive.
You Can Change By Other Ways, Like Terminal Emulator Write Commands "SU" Then "setenforce 1/0* 1 = Enforcing 0 - Permissive. You are able to change selinux status but on next boot it will set automatically to Permissive, If You Have SELINUX MODE CHANGER set to enforcing after successful boot you get notification SELINUX MODE CHANGED TO ENFORCING. From Now Default Selinux Mode is Permissive. Using terminal to set it to enforcing, on next boot will be back permissive. You Can Manually Modify /SYS/FS/SELINUX/Enforce file to change mode. Same Ids for mode's like terminal
Have Fun

Selinux Permissive Unlocks You Access To Useful Apps or Make Apps Run in Normal Mode instead of Limited (like viper4android). No More Waiting to Custom Kernel with SELINUX Permissive for this device. to disable frp before installing custom kernel take a look at my guide "[GUIDE] How to disable FRP LOCK re-enabling after add google account" if this not work you need to live without google account. If i'm Offline you can still send private message to me. i will try to help you fast as i can. or contact me email Thesmgcraft@gmail.com

TheSMGCraft · Nov 25, 2016

MikeAlmonte said:
Thank you so much

If You already Installed Custom Kernel before disabling frp with google account to have it disabled with custom kernel
You need to live without google account or
try to do my guide but You Have RISK! To get Custom Binary Blocked By FRP Lock if you do something Wrong!

dadziokPL · Nov 25, 2016

fabiossilva21 said:
Good luck... it is a pain in the ass to develop a kernel for this variant... the one I'm using took me 2 days to make

Oh, hi! I used your guide for building, really simple and useful

It took me one and a half hour to do this, including building which was like 15 minutes. You know how to add governors/overclock/other features to a kernel? Because I have no ****ing idea about it. I also uploaded the kernel to Github, so feel free to create pull requests or whatever https://github.com/dadziokPL/android_kernel_samsung_grandprimevelte

chaudharyjatin115 · Nov 25, 2016

Thanks bro

Sent from my AO5510 using Tapatalk

TheSMGCraft · Nov 25, 2016

chaudharyjatin115 said:
Thanks bro

Sent from my AO5510 using Tapatalk

Enjoy! Didn't You forgot before installing Permissive Kernel disabling frp lock ?

fabiossilva21 · Nov 25, 2016

dadziokPL said:
Oh, hi! I used your guide for building, really simple and useful It took me one and a half hour to do this, including building which was like 15 minutes. You know how to add governors/overclock/other features to a kernel? Because I have no ****ing idea about it. I also uploaded the kernel to Github, so feel free to create pull requests or whatever https://github.com/dadziokPL/android_kernel_samsung_grandprimevelte

Hey! Thanks!
I haven't found a way to do so. You need to change a few .c files, the problem is that you have to mess with voltages and no work has been done with this cpu, so messing with them is pretty insecure atm.
Use this

[RELEASE][PERMISSIVE][Kernel] Samsung Galaxy Grand Prime SM-G531F

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

New member

Member

Senior Member

Member

Senior Member

Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts