WELCOME TO
SAMSUNG GALAXY S3 mini VE
THREAD
SAMSUNG GALAXY S3 mini VE
THREAD
Informations about VE
The new model runs Android 4.2 Jelly Bean out of the box (as opposed to Android 4.1), and has a 1.2GHz dual-core processor (an upgrade from the 1.0GHz dual-core CPU of the old model). And that’s it, the rest of its features remained unchanged, including a 4-inch display with 480 x 800 pixels, 5MP rear camera, 1GB of RAM, and 8GB of expandable internal memory.
CPU Marvell PXA986 / ARM Cortex-A9
GPU Vivante GC1000
chipset is a marvel pxa 986/pxa988 chip set
opensource code HERE
GPU Vivante GC1000
chipset is a marvel pxa 986/pxa988 chip set
opensource code HERE
PETITIONS
BECAUSE I8200 IS A DIFFERNT MODEL FROM ORIGINAL S3 mini DOESNT EXIST MANY DEVS OR SOURCE.HERE IT IS SOME PETITIONS TO MOVAFUSION AND OTHER TO HELP AND SUPPORT US
PETITION 1 - PLEASE Click on it and sign.
PETITION 2 - PLEASE Click on it and sign.
ROOT-KERNELS-ROMS-RECOVERY-MODS & UNBRICK
BEFORE START..READ ALL CAREFULLY.IF YOU DONT UNDERSTAND DONT DO IT !!!
Samsung SIII mini Ve i8200/N/L/Q is not same with i8190/N/L
DONT TRY ANYTHING FROM I8190
ROOT METHODS
1. Vroot http://vrootdownload.info/
Instructions
2. Kingo root http://www.kingoapp.com/
Instructions:
Just run the app
3. Flash SuperSU
Instructions
1. Download the rooting application. (This app can root many other devices)
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called ???? 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by ???? 1.0.4, choose ??(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze ???? 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and ???? 1.0.4 will not be there anymore
.
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called ???? 1.0.4.
5. Go to play store and install SuperSU.
6. Start SuperSU and you will be asked for permission by ???? 1.0.4, choose ??(means allow). (Should be the right side option.)
7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze ???? 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and ???? 1.0.4 will not be there anymore
2. Kingo root http://www.kingoapp.com/
Instructions:
Just run the app
3. Flash SuperSU
RECOVERY
TWRP recovery (SAFE)
Link here
Philz Touch Recovery (safe)
Infos for Philz recovery:
Warning about the recovery:
Installation Guide for recoveries:
Link Attention with TWRP-Recovery. Data-Partition restore seems to be not right. At the moment please did not use it, because it can delete your data-partition. We have to investigate it further! Other partitions seems to be ok, but its a good Idea if you copy your important data also manually to a other storage (like PC) while you trying things of this thread.[/COLOR]
Philz Touch Recovery (safe)
Link [URL="https://www.dropbox.com/s/cviev1st9d3331z/PhilzTouch_recovery.tar.md5.zip?dl=0"]Here
Infos for Philz recovery:
Philz-Recovery seems to work fine for the Backup/Restore functions and also some zip-installations (be aware that not every zip is compatible with i8200!) .No workin boot image backup
Warning about the recovery:
Nevertheless, it is absolutely recommended to go to recovery ONLY WITH THE THREE BUTTON METHOD !!! To try it with the software/adb/startmenü "Reboot to recovery" will produce at the moment a bootloop, which can produce a "not easy to solve Softbrick". The three-Button-Method is safe!
Installation Guide for recoveries:
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the recovery file mda file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the recovery file mda file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
*NOW Take a backup before continue
KERNELS:
ROMS:
ALL IS STOCK BASED ROMS
NO CM AOSP OR OTHER CUSTOM ROMS
1 First Custom ROM for S3 Mini Value Edition [TEST BUILD][NO WARRANTY]
2. [ROM] [STOCK] Deodex ROM for goldenvess-3gxx
3. [ROM][STOCK] aosp themed Rom for S3 mini VE
4.[VE][ROM][STOCK]GoldenS5 Style for S3 mini VE
5.[VE][ROM][4.3] for Samsung Galaxy S3 mini VE
MODS:
DeOdex Stock APPs:
Tweaks for stock firmware:
Center clock and Battery percentage:
Use Xposed Instaler & Gravity box
* I am not responsible for bricked devices, dead SD cards
*If you are unsure about what you do or do not know
how to revive your mobile not do anything not from the below
* Me or the other members not our responsibility
if you destroy your mobile
UNBRICK METHOD:
You can find firmwares for i8200/N at http://www.sammobile.com/firmwares/ (Just search your model. Be careful with i8200 and I8200N maybe soft brick if install wrong!!!)
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thanks to:
@greeneyes2910 for the recovery philz
@SolarPlexus for kernel and twrp recovery
@t-shock for this tweaks
@JynAlek for this helpness and the testing and beta test rom
@drumandbassfreak for [STOCK] Deodex ROM
@PaulRichter for the stock themed rom
Attachments
Last edited: