Hi info were I can buy to upgrade from RK3066 to PX3 RK3188
thanks
Hi info were I can buy to upgrade from RK3066 to PX3 RK3188
thanks
I didn't really check, sorry. I recall going through the Factory Settings menu and not seeing anything weird. Anything i need to be aware off which could cause battery drain? I know i set the ACC to 30seconds, thats the android setting to prevent power leakage right? After 30seconds of no-key in ignition android will shut down.. and hopefully the MU along with it.
I know there is a mcu.cfg on my sd card from a backup i did before messing with anything. I attached it, just in case its useful for something
Did you flash the mcu.cfg at the same time as the MCU ? I ask cos as I said it could well be that 2.83 did not work because all the settings were messed up, unless you know exactly what they all are on your unit and can discount that ?
I know there is a mcu.cfg on my sd card from a backup i did before messing with anything. I attached it, just in case its useful for something
I cant discount that for sure. I currently have 2.70 flashed and can flash to 2.83 and double check all settings to get the radio to work.
Do you think that the 2.70 will have solved the car battery drain problem? I would hate to jump start my car tomorrow for work.
yes, I also have many issues with hotspot/wifi connection. Im my experience, it seems the wifi module of these headunits is very weak and only like certain wifi bands/channels depending on the interference from other nearby hotpots that may be on the same channel.. Case in point, I would try to connect to my phone hotspot while my regular hotspot is on and neither would connect but after manually changing the wifi channel of one of them it would connect.
What I found out that, from unknown reason, I should switch OFF iPhone hotspot, until the Android system will finish boot up. Only after that, I switch the iPhone hotspot to ON, and a minute or two later, the Android system will discover the hotspot, and connects to it.
In any other option, the Android will not recognize the hotspot at all whatsoever.
This is very annoying.
I had the same problem with iphone but now in my case works if I turn on and off the hotapot for a couple of times and after that it connects in cew seconds...
Sent from my iPhone using Tapatalk
No nothing at all on my iphone but I think I reduced the time wifi scan interval in build.prop on head unit.
Its only really useful for you because its all the mcu settings of your unit.
I ve no idea I m afraid, I guess yourll just have to see in the morning unless youve got some way of measuring battery drain.
Car battery didnt drain! Not sure if its the MCU 2.53 darkleo which was the problem or if i played around too much withour charging. But all is good!
:highfive:
Hi folks!
Any news for the new update of Malaysk for rk3066 880x480?
B. Regards
Hi obekende,
Malaysk is stopped making any ROMS :crying::crying: thats what i heard from the Russian collega`s.
its a pitty Malaysk is stopped making ROMs Version 44 is the last one, and it sil works great.
Regards Peter
Hello, I am using 5_1_1_FUSE_1024X600_RK3188 Malaysk ROM but seens too slow, especially google maps. Is there something special I need to do to install the 4.4.4 ROM?
17. Added to Settings - System - Manage traffic. Where you can enable, disable, change the color display in the curtain traffic notifications.[controls]
title=true
buttons=true
# To display the names of the stations in the RDS information
[title]
90.80=Relax FM
101.70=Nashe Radio
88.30=Retro FM
# Short names for display stations in buttons
[buttons]
90.80=Relax
101.70=Nashe
88.30=Retro
That is how you want to change the letters in writing, and will display the date. Customize the date format in the format user-JAVAdd / MM / yy
MM / dd / yy
yyyy-MM-dd
yyyy-dd-MM
dd-MM-yyyy
MM-dd-yyyy
MMM dd
MMMM dd, yyyy - will appear as February 1, 2015
MMMM dd, yyyy
EEE
EEE dd
EEE dd / MM
EEE MM / dd
EEE dd MMM
EEE MMM dd
EEE MMMM dd - will be displayed as the sun FEBRUARY 01
EEEE MMMM dd - will appear as Sunday February 01
EEEE dd / MM
EEEE MM / dd
17. Added to Settings - System - Manage traffic. Where you can enable, disable, change the color display in the curtain traffic notifications.[controls]
title=true
buttons=true
# To display the names of the stations in the RDS information
[title]
90.80=Relax FM
101.70=Nashe Radio
88.30=Retro FM
# Short names for display stations in buttons
[buttons]
90.80=Relax
101.70=Nashe
88.30=Retro
That is how you want to change the letters in writing, and will display the date. Customize the date format in the format user-JAVAdd / MM / yy
MM / dd / yy
yyyy-MM-dd
yyyy-dd-MM
dd-MM-yyyy
MM-dd-yyyy
MMM dd
MMMM dd, yyyy - will appear as February 1, 2015
MMMM dd, yyyy
EEE
EEE dd
EEE dd / MM
EEE MM / dd
EEE dd MMM
EEE MMM dd
EEE MMMM dd - will be displayed as the sun FEBRUARY 01
EEEE MMMM dd - will appear as Sunday February 01
EEEE dd / MM
EEEE MM / dd
# Внимание! Это файл настройки для модифицированных плееров JY и KGL. На плеерах KLD функция просмотра тэгов с обложкой альбома работать не будет.
# Менять можно только параметры после знака =
# Attention! This is the configuration file for the modified players JY and KGL. On players KLD viewing function tag with album art will not work.
# Change the settings can only be after the = sign
[music]
# Название картинки из папки с музыкой, для отображения в плеере в качестве альбома и проекции на фон
# Name of the images from a folder with music, to display in the player as the album and the projection on the background
album_cover=cover.jpg
# Время перемотки в секундах, назначенное на виртуальные кнопки слева и справа от временной шкалы проигрывания файла. Вперед и назад
# Rewind time in seconds assigned to the virtual buttons on the left and right of the time scale of file playback. Forward and backward
fwdpress.time=20
backpress.time=20
# Настройка всплывающего сообщения о треке в плеере, если он не активен. Разрешение (true или false) и размер шрифта.
# Configure the pop-up messages on the track in the player if it is not active. Resolution (true or false) and font size.
toast=true
toast.size=22
# Формат всплывающего сообщения. Можно использовать %title% %artist% %album% %filename% и %fullfilename%. Можно комбинировать и вставлять свои символы и слова.
# Format pop-up message. You can use the %title% %artist% %album% %filename% and %fullfilename%. You can combine and embed their characters and words.
toast.format=%artist% - %title%
# Желаемый уровень прозрачности проекции обложки альбома на общий фон плеера (в десятых долях от 1). Если пусто, то по-умолчанию будет уровень 0,25. Чтобы убрать проекцию, поставить =0.
# Desired level of transparency of the album cover on the projection of the general background of the player (in tenths of 1). If empty, the default will be the level of 0.25. To remove the projection, put = 0.
background_alpha=
[screenclock]
# Выключение скринсейвера только при касании экрана. true - да, false - штатный режим работы.
# Turn off the screensaver only when you touch the screen. true - yes, false - normal mode of operation.
touch_mode=true
# Выключение скринсейвера при входящем звонке. true - да, false - панель телефона появляется на фоне скринсейвера.
# Turn off the screen saver when an incoming call. true - yes, false - of the phone appears on the background of the screen saver.
bluetooth.close=false
# Цвет информационных строчек скринсейвера. Можно писать =red, =green, =blue, либо в hex-коде =#ffff0000 (см. Googl). Если пусто, то по-умолчанию будет цвет от автора.
# Color information strings screensaver. You can write a = red, = green, = blue, or hex-code = #ffff0000 (see. Googl). If empty, the default will be the color from the author.
color=
# Формат даты скринсейвера, если задать, будет свой, если пусто, то по-умолчанию - EEEE d MMMM yyyy (вторник 2 февраля 2015)
# Format screensaver date, if set, will be your if empty, the default - EEEE d MMMM yyyy (Tuesday February 2, 2015)
date_format=
# Цвет и прозрачность фона скринсейвера. Сделать черным и не прозрачным так =#ff000000, или так =black, или любой цвет. По-умолчанию чёрный с прозрачностью 0.75.
# The color and transparency of the background of the screen saver. Make black and not transparent as = #ff000000, or so = black, or any color. By default, black with transparency 0.75.
background_color=
# Прозрачность проекции обложки альбома в Скринсейвере (в долях от 1). Ложится сверху фона (прозрачного, или черного). Чтобы убрать её совсем, поставить =0.
# Transparency projection album cover in the screensaver (in fractions of 1). It lies on top of the background (transparent or black). To remove it completely, put = 0.
cover_alpha=0.25