[ROM][4.4.4]VanirAOSP[OFFICIAL][Samsung X Cover 2-GT-S7710]

Search This thread
By:
Advanced…
Unjustified Dev

Unjustified Dev

Recognized Developer
Oct 21, 2012
7,185
13,082
26
Memphis , TN
toast-bootanimation.gif

Smooth like Butta

Follow on G+: Team Vanir

Vanir Team:
NuclearMistake
Sonicxml
DHO
PrimeDirective


Not all features are available yet.


Features:

Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..

What to expect:
- This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
- maximum optimization. We do our research. We test hard. We build -fstrict -O3 globally and include a massive array of code optimizations and memory leak fixes that we write ourselves and eventually submit to AOSP or Linaro.
- originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
- aesthetics.. hopefully in your opinion :p

General features:
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d.
UI and graphics improvements
custom navbar, navring, and hardware key features
improved notification handling (active display & halo are in review also)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
soon to come -> quick cam and flash notifications
busybox, embedded root, init.d, cron etc
yatta yatta yatta
more to come when i feel like updating the op

Changelog:
**Vanir Open Status

**Vanir Merged Status

Vanir Downloads:

**Nightlies

Recovery Downloads:

**CWM

Vanir Github:
**VanirAOSP Git

Gapps:
**4.4.2 PA Gapps


Installation Instructions
Make sure your using cwm above it's required
Full wipe
Install ROM
Install Gapps

Thanks
TeamVanir
Meticulus
Everyone here for keeping me inspired

Source
Kernel
Skomer device tree
Common device/Codinalte
Vendor
 
Last edited:
  • Like
Reactions: TeamSDX, DroidsCtrlHumans, HiTcHeR007 and 52 others
Unjustified Dev

Unjustified Dev

Recognized Developer
Oct 21, 2012
7,185
13,082
26
Memphis , TN
New build coming thanks to @frapeti for a fix for making the device tree even more common. Results in way less work. Now skomer and golden trees don't need modification at all. Anything done to codinalte will be used for golden and skomer.

edit: To fix confusion codinalte builds aren't compatible. It just allows skomer device tree to take our code and use it without having to maintain more source.
 
Last edited:
  • Like
Reactions: pingguo, Dragon.klz and Alexerik
Unjustified Dev

Unjustified Dev

Recognized Developer
Oct 21, 2012
7,185
13,082
26
Memphis , TN
3/21/14 Build now available

Makes sure your using my cwm

* Upstream CyanogenMod updates

* Upstream Vanir Updates

* Codinalte Relocate keylayouts per device

* Skomer and Golden copy ramdisk files from codinalte to minimize the amount of code to maintain

* Codinalte minor clean up of files. Removed unneeded files and configs

* Skomer added device specific gpio-keys to fix home , menu , and back button

* WIFI??? Please report back.

* Device tree is now available to compile for any rom. Previously is was not clean and had errors

Always a logcat is needed when you report a problem and is much appreciated.

http://www.androidfilehost.com/?fid=23329332407580741

Could someone pull config?
adb pull proc/config.gz thank you
 
Last edited:
  • Like
Reactions: tofanpc, pingguo, Alexerik and 2 others
V

vastus

Member
Dec 4, 2013
26
9
Hi,

I did some testing with the vanir_skomer_4.4.2.032114 build.

- no mobile network, ROM couldn't find my SIM or any network.
- no WiFi, it was greyed out in both the pull menu and settings. I couldn't enable it.
- on 1st boot, Home and Back buttons worked but on the 2nd boot I somehow lost that functionality :eek:

I had similar problems with flxo's cm builds. I flashed from the stock if that matters anything.

Otherwise looks like a nice ROM :)
Also CWM seems to work ok.

I managed to get a logcat, hopefully it helps.

doh, I forgot to pull that config you requested. I'll try keep it on my mind next time I flash..
 

Attachments

  • logcat_vanir_skomer_4.4.2.032114.zip
    133.5 KB · Views: 2,286
Last edited:
V

vastus

Member
Dec 4, 2013
26
9
Unjustified Dev said:
Could someone pull config?
adb pull proc/config.gz thank you
Click to expand...
Click to collapse

Here is the proc/config.gz as you requested.

I tested vanir_skomer_4.4.2.032314 build.

- Can confirm that WiFi works now.
- I still dont have mobile network. (can provide another logcat if that's necessary.)
- On the 1st boot, none of the hardware keys (home, back, menu etc.) worked except the power button. On 2nd boot all buttons started to work (kinda weird).

I can't comment on low volume in call or builds stability due to problem I listed above ^^.

Great job anyways :)
 

Attachments

  • config.gz
    17.6 KB · Views: 752
  • Like
Reactions: jendelin and maurensen
pingguo

pingguo

Senior Member
Jan 27, 2013
150
58
seems to work quite nicely now!
not sure if it is of interest, or the right place to discuss, but is it possible to give some of the free memory in the system partition to data, so that we might have a chance to enjoy art even with a moderate number of user apps? i ran into problems with 60 apps. didn't have enough time to check if something was wrong with the foldermounts, but i think in general on the s7710 we have too much system...

nice work with the rom and thanks for reviving s7710 development, the 03-23 version worked flawlessly in my super short test! :silly:

edit: link2sd was in operation, so that was not the culprit.
 
Unjustified Dev

Unjustified Dev

Recognized Developer
Oct 21, 2012
7,185
13,082
26
Memphis , TN
vastus said:
Here is the proc/config.gz as you requested.

I tested vanir_skomer_4.4.2.032314 build.

- Can confirm that WiFi works now.
- I still dont have mobile network. (can provide another logcat if that's necessary.)
- On the 1st boot, none of the hardware keys (home, back, menu etc.) worked except the power button. On 2nd boot all buttons started to work (kinda weird).

I can't comment on low volume in call or builds stability due to problem I listed above ^^.

Great job anyways :)
Click to expand...
Click to collapse
I have the config dump that was for the kernel thanks. I'm still not understanding the internet problem some say it work some say it takes 7-10 minutes before it connects. I'm a bit confused.

adb logcat -b radio > radio.txt

this will create radio.txt which you can upload.

To ensure everything is correct did you wipe data , format system , and wipe dalvik cache before flashing?
 
  • Like
Reactions: pingguo and vastus
V

vastus

Member
Dec 4, 2013
26
9
Unjustified Dev said:
I have the config dump that was for the kernel thanks. I'm still not understanding the internet problem some say it work some say it takes 7-10 minutes before it connects. I'm a bit confused.

adb logcat -b radio > radio.txt

this will create radio.txt which you can upload.

To ensure everything is correct did you wipe data , format system , and wipe dalvik cache before flashing?
Click to expand...
Click to collapse

Okay, I tried again and this time I left phone on the table for 30 mins, no signal. :|
Yes, I always wipe data, format /system and wipe dalvik cache, when switching roms.

Here's radio logcat.
 

Attachments

  • logcat_radio.zip
    10.3 KB · Views: 263
  • Like
Reactions: Unjustified Dev
maurensen

maurensen

Senior Member
Jul 9, 2013
382
74
Testing..
Using latest build for some hours:
Phone line OK GSM+3g
Wi fi Semi OK something needs a cache + dalvik reset to work
Phone call volume OK

Average impression: really good keep testing thanx 4 your work!

Sent from my GT-S7710 using xda app-developers app
 
Last edited:
  • Like
Reactions: Unjustified Dev
B

BoaRek

Member
Feb 6, 2007
14
2
Hello
At first: thx a lot for that thread. I am gona test this rom as soon as possible (when i switch my primary phone to SIII mini).

and about radio:
i remember from forum, that Some X Cover 2 phones with cyanogenmod have GSM problems.
i saw 2 types:

1.) no network at all - that was fixed by wiping system partition before flash

2.) low signal, long singon, and often singal lost,

i have device with same problems - original and rooted rom works fine, with perfect signal, and fast gms search.
Cyanogenmod (10.2 alpha 8, and 10.2 alpha 10) make GSM issues - long time to sing into gsm, and very often singout. when i make a call, it was interupted in about 20 second, and i got no network signal for a while.

p.s. sorry for my english :)

maurensen said:
Testing..
Using latest build for some hours:
Phone line OK GSM+3g
Wi fi Semi OK something needs a cache + dalvik reset to work

Average impression: really good keep testing thanx 4 your work!

Sent from my GT-S7710 using xda app-developers app
Click to expand...
Click to collapse
 
M

MDobak

Member
Oct 16, 2009
7
2
Hey,

At first thanks for your awesome work :) I've just tested your ROM and everything works at least as god as in flxo latest CM10.2 ROM but I noticed one annoying thing: touchscreen dosn't work on very bottom of screen. To turn on applications on home screen i need to aim at the upper part of icon. I also noticed that it's imposible to turn on live wallpapers.

btw: sorry for my english ;)
 
  • Like
Reactions: Unjustified Dev
maurensen

maurensen

Senior Member
Jul 9, 2013
382
74
Also I've noticed that the touch on bottom of the screen is not working well( for ex if I have keyboard open I have to press two or three times to get keys on bottom screen to be detected).
BTW I have often some random reboot but the rest of the Rom is working well so for now I think I'll not switch back to flxo 's CM 10.2 and try to use 24/7 this nice rom.
Thanx for your work unjustified dev!

Sent from my GT-S7710 using xda app-developers app
 
  • Like
Reactions: ogremount and Unjustified Dev
M

MDobak

Member
Oct 16, 2009
7
2
maurensen said:
I have often some random reboot but the rest of the Rom is working well
Click to expand...
Click to collapse

I also have problem with random reboots :(

Code: 
[ 1433.318023] CPU1: shutdown
[ 1449.938720] ux500_pm_gpio_save_wake_up_status: bank6: 0x01000000
[ 1449.938751] Returning from ApDeepSleep. PRCMU ret: 0xf6 - Success
[ 1449.939575] Wakeup Status: 0x20000000
[ 1449.939727] DVFS Governor Policy set to - ondemand
[ 1449.948120] PM: early resume of devices complete after 0.915 msecs
[ 1449.948577] wakeup wake lock: wlan_wake
[ 1449.962463] -> NCP6914_i2c_resume()
[ 1449.962493] <- NCP6914_i2c_resume() = 0
[ 1449.962524] bma254_resume: is called
[ 1449.962524] hscd_resume: is called
[ 1450.040283] bcmsdh_sdmmc_resume Enter
[ 1450.040283] bcmsdh_sdmmc_resume Enter
[ 1450.042327] [rtc_resume] AP RTC TIME: 1970.01.01 - 00:00:00 called
[ 1450.042358] [rtc_resume] PMIC RTC TIME: 2014.03.24 - 20:01:53 called
[ 1450.042358] [rtc_resume] SYSTEM TIME: 2014.03.24 - 20:01:53 called
[ 1450.042358] [rtc_resume] delta.tv_sec: 0 delta.tv_nsec: 0
[ 1450.042388] [rtc_resume] delta_delta.tv_sec: -1 delta_delta.tv_nsec: 526663808
[ 1450.044799] PM: resume of devices complete after 94.798 msecs
[ 1450.045440] DVFS Governor Policy set to - ondemand
[ 1450.045440] new min and max freqs are 200000 - 1000000 kHz
[ 1450.045471] Restarting tasks ... 
[ 1450.046203] hub 1-0:1.0: activate --> -22
[ 1450.092407] done.
[ 1450.092956] [Message To CP] Ret: 13
[ 1450.092956] [writePacketToFile]request byte length = 13,  return byte = 13
[ 1450.092987] tx_ap_state(WAKEUP): 0
[ 1450.092987] suspend: exit suspend, ret = 0 (2014-03-24 20:01:53.550652880 UTC)
[ 1450.094268] Enabling non-boot CPUs ...
[ 1450.095092] sec-battery sec-battery: sec_bat_get_battery_info: Connected, SOC(95%)
[ 1450.095123] sec-battery sec-battery: sec_bat_get_battery_info: Vnow(4259mV), Vavg(1618mV), Vocv(1618mV)
[ 1450.095123] sec-battery sec-battery: sec_bat_get_battery_info: Inow(-146mA), Iavg(-104mA), Iadc(0)
[ 1450.095153] sec-battery sec-battery: sec_bat_get_battery_info: Tbat(236), Tamb(700)
[ 1450.096435] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), Health(Good), Cable(1)
[ 1450.120971] CPU1: Booted secondary processor
[ 1450.122131] Switched to NOHz mode on CPU #1
[ 1450.142974] CPU1 is up
[ 1450.719390] ab8500-fg ab8500-fg.0: [FG_DATA] 1618mAh/1700mAh 95% (Prev 1623mAh 95%) 4277mV -233mA -104mA -578 0 0 5 1 1 143 95 0 0 0
[ 1450.895233] ux500_pm_gpio_save_wake_up_status: bank6: 0x01000000
[ 1450.895416] Wakeup Status: 0x20000000
[ 1451.698974] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[ 1451.699005] pgd = e3d34000
[ 1451.699005] [00000010] *pgd=00000000
[ 1451.699035] Internal error: Oops: 5 [#1] PREEMPT SMP
[ 1451.699035] dbx500_dump notified of crash
[ 1451.701354] Modules linked in: dhd bthid param(P) j4fs(P)
[ 1451.701385] CPU: 1    Tainted: P        W    (3.0.31+ #1)
[ 1451.701415] PC is at disable_led_notification+0x34/0xc0
[ 1451.701446] LR is at notification_led_status_write+0x4c/0x110
[ 1451.701477] pc : [<c03717f0>]    lr : [<c0371a1c>]    psr: 200b0013
[ 1451.701477] sp : e3cffec0  ip : 00000000  fp : e3cffed4
[ 1451.701477] r10: c06b0758  r9 : e6584808  r8 : e658f8a8
[ 1451.701507] r7 : e39bee60  r6 : e3cfff78  r5 : e39bee78  r4 : c0fa9460
[ 1451.701507] r3 : 00000001  r2 : 00000000  r1 : c086dd43  r0 : 00000001
[ 1451.701538] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1451.701538] Control: 10c5787d  Table: 23d3404a  DAC: 00000015
[ 1451.701568] 
[ 1451.701568] PC: 0xc0371770:
(... dump data ...)
[ 1451.706420] [<c03717f0>] (disable_led_notification+0x34/0xc0) from [<c0371a1c>] (notification_led_status_write+0x4c/0x110)
[ 1451.706451] [<c0371a1c>] (notification_led_status_write+0x4c/0x110) from [<c0353878>] (dev_attr_store+0x28/0x34)
[ 1451.706481] [<c0353878>] (dev_attr_store+0x28/0x34) from [<c01bad5c>] (sysfs_write_file+0x178/0x1a8)
[ 1451.706512] [<c01bad5c>] (sysfs_write_file+0x178/0x1a8) from [<c01633fc>] (vfs_write+0xac/0x150)
[ 1451.706542] [<c01633fc>] (vfs_write+0xac/0x150) from [<c01636b4>] (sys_write+0x48/0x80)
[ 1451.706573] [<c01636b4>] (sys_write+0x48/0x80) from [<c0067a00>] (ret_fast_syscall+0x0/0x30)
[ 1451.706573] Code: e5d43008 e3530000 0a000017 e594c00c (e59c2010) 
[ 1451.706603] CPU0: stopping
[ 1451.706634] [<c006f00c>] (unwind_backtrace+0x0/0x144) from [<c0670c34>] (dump_stack+0x20/0x24)
[ 1451.706665] [<c0670c34>] (dump_stack+0x20/0x24) from [<c0060694>] (do_IPI+0x200/0x23c)
[ 1451.706695] [<c0060694>] (do_IPI+0x200/0x23c) from [<c006744c>] (__irq_svc+0x4c/0xe8)
[ 1451.706695] Exception stack(0xc0939e80 to 0xc0939ec8)
[ 1451.706726] 9e80: c0fd1d34 600f0093 00000001 00000000 6817667c 00000048 00000f23 00000001
[ 1451.706726] 9ea0: 67dc4498 00000048 00000001 c0939f5c c0939e50 c0939ec8 c04361c0 c04334a0
[ 1451.706756] 9ec0: 600f0013 ffffffff
[ 1451.706787] [<c006744c>] (__irq_svc+0x4c/0xe8) from [<c04334a0>] (enter_sleep+0x3ec/0x7e0)
[ 1451.706787] [<c04334a0>] (enter_sleep+0x3ec/0x7e0) from [<c0430f54>] (cpuidle_idle_call+0xc8/0x2fc)
[ 1451.706817] [<c0430f54>] (cpuidle_idle_call+0xc8/0x2fc) from [<c0068a30>] (cpu_idle+0xcc/0x120)
[ 1451.706848] [<c0068a30>] (cpu_idle+0xcc/0x120) from [<c065ef3c>] (rest_init+0x94/0xac)
[ 1451.706878] [<c065ef3c>] (rest_init+0x94/0xac) from [<c0008a90>] (start_kernel+0x3fc/0x490)
[ 1451.706878] [<c0008a90>] (start_kernel+0x3fc/0x490) from [<00008040>] (0x8040)
[ 1451.707031] fd_line_length=1920
[ 1451.707031] Oops
[ 1451.707061] Kernel panic!!. Please connect the phone to PC
[ 1451.707244] enable capture and press the volume down key to get the
[ 1451.707458] kernel log.  Repeat if required.
[ 1451.707550] Press volume up to enter upload mode.
[ 1451.717437] Board Information: UX500: 6C, cpu U8500 ES178
[ 1451.717468] ---[ end trace 2b6060ff815a1cef ]---
[ 1451.717468] Kernel panic - not syncing: Fatal exception
[ 1451.717529] [<c006f00c>] (unwind_backtrace+0x0/0x144) from [<c0670c34>] (dump_stack+0x20/0x24)
[ 1451.717559] [<c0670c34>] (dump_stack+0x20/0x24) from [<c06710fc>] (panic+0x80/0x2c0)
[ 1451.717590] [<c06710fc>] (panic+0x80/0x2c0) from [<c006bad4>] (die+0x1dc/0x214)
[ 1451.717590] [<c006bad4>] (die+0x1dc/0x214) from [<c0670c9c>] (__do_kernel_fault.part.2+0x64/0x84)
[ 1451.717620] [<c0670c9c>] (__do_kernel_fault.part.2+0x64/0x84) from [<c0073980>] (do_page_fault+0x278/0x378)
[ 1451.717651] [<c0073980>] (do_page_fault+0x278/0x378) from [<c0073bc0>] (do_translation_fault+0xa8/0xb0)
[ 1451.717681] [<c0073bc0>] (do_translation_fault+0xa8/0xb0) from [<c0060218>] (do_DataAbort+0x44/0xac)
[ 1451.717681] [<c0060218>] (do_DataAbort+0x44/0xac) from [<c00673d0>] (__dabt_svc+0x70/0xa0)
[ 1451.717712] Exception stack(0xe3cffe78 to 0xe3cffec0)
[ 1451.717712] fe60:                                                       00000001 c086dd43
[ 1451.717742] fe80: 00000000 00000001 c0fa9460 e39bee78 e3cfff78 e39bee60 e658f8a8 e6584808
[ 1451.717742] fea0: c06b0758 e3cffed4 00000000 e3cffec0 c0371a1c c03717f0 200b0013 ffffffff
[ 1451.717773] [<c00673d0>] (__dabt_svc+0x70/0xa0) from [<c03717f0>] (disable_led_notification+0x34/0xc0)
[ 1451.717803] [<c03717f0>] (disable_led_notification+0x34/0xc0) from [<c0371a1c>] (notification_led_status_write+0x4c/0x110)
[ 1451.717834] [<c0371a1c>] (notification_led_status_write+0x4c/0x110) from [<c0353878>] (dev_attr_store+0x28/0x34)
[ 1451.717864] [<c0353878>] (dev_attr_store+0x28/0x34) from [<c01bad5c>] (sysfs_write_file+0x178/0x1a8)
[ 1451.717864] [<c01bad5c>] (sysfs_write_file+0x178/0x1a8) from [<c01633fc>] (vfs_write+0xac/0x150)
[ 1451.717895] [<c01633fc>] (vfs_write+0xac/0x150) from [<c01636b4>] (sys_write+0x48/0x80)
[ 1451.717926] [<c01636b4>] (sys_write+0x48/0x80) from [<c0067a00>] (ret_fast_syscall+0x0/0x30)
[ 1451.718048] machine_restart: lockup
[ 1451.718078] machine_restart: cmd: LockUp
[ 1451.718078] machine_restart: reboot_mode: L
[ 1451.718078] machine_restart: arm_pm_restart: 0xc0078380
[ 1451.718078] ux500_restart: Call arch_reset(), mode: L, cmd: LockUp
 
Last edited:
  • Like
Reactions: fbs
maurensen

maurensen

Senior Member
Jul 9, 2013
382
74
After some reboots no more random resets.. Good... Using from some hours and the Rom now seems solid not as flxo cm10.2 but very usable!
I'm going to keep it!
BTW switched to Art runtime just to try it with no problems so far...
Very nice Rim very customizable

Sent from my GT-S7710 using xda app-developers app
 
Unjustified Dev

Unjustified Dev

Recognized Developer
Oct 21, 2012
7,185
13,082
26
Memphis , TN
MDobak said:
I also have problem with random reboots :(

Code: 
[ 1433.318023] CPU1: shutdown
[ 1449.938720] ux500_pm_gpio_save_wake_up_status: bank6: 0x01000000
[ 1449.938751] Returning from ApDeepSleep. PRCMU ret: 0xf6 - Success
[ 1449.939575] Wakeup Status: 0x20000000
[ 1449.939727] DVFS Governor Policy set to - ondemand
[ 1449.948120] PM: early resume of devices complete after 0.915 msecs
[ 1449.948577] wakeup wake lock: wlan_wake
[ 1449.962463] -> NCP6914_i2c_resume()
[ 1449.962493] <- NCP6914_i2c_resume() = 0
[ 1449.962524] bma254_resume: is called
[ 1449.962524] hscd_resume: is called
[ 1450.040283] bcmsdh_sdmmc_resume Enter
[ 1450.040283] bcmsdh_sdmmc_resume Enter
[ 1450.042327] [rtc_resume] AP RTC TIME: 1970.01.01 - 00:00:00 called
[ 1450.042358] [rtc_resume] PMIC RTC TIME: 2014.03.24 - 20:01:53 called
[ 1450.042358] [rtc_resume] SYSTEM TIME: 2014.03.24 - 20:01:53 called
[ 1450.042358] [rtc_resume] delta.tv_sec: 0 delta.tv_nsec: 0
[ 1450.042388] [rtc_resume] delta_delta.tv_sec: -1 delta_delta.tv_nsec: 526663808
[ 1450.044799] PM: resume of devices complete after 94.798 msecs
[ 1450.045440] DVFS Governor Policy set to - ondemand
[ 1450.045440] new min and max freqs are 200000 - 1000000 kHz
[ 1450.045471] Restarting tasks ... 
[ 1450.046203] hub 1-0:1.0: activate --> -22
[ 1450.092407] done.
[ 1450.092956] [Message To CP] Ret: 13
[ 1450.092956] [writePacketToFile]request byte length = 13,  return byte = 13
[ 1450.092987] tx_ap_state(WAKEUP): 0
[ 1450.092987] suspend: exit suspend, ret = 0 (2014-03-24 20:01:53.550652880 UTC)
[ 1450.094268] Enabling non-boot CPUs ...
[ 1450.095092] sec-battery sec-battery: sec_bat_get_battery_info: Connected, SOC(95%)
[ 1450.095123] sec-battery sec-battery: sec_bat_get_battery_info: Vnow(4259mV), Vavg(1618mV), Vocv(1618mV)
[ 1450.095123] sec-battery sec-battery: sec_bat_get_battery_info: Inow(-146mA), Iavg(-104mA), Iadc(0)
[ 1450.095153] sec-battery sec-battery: sec_bat_get_battery_info: Tbat(236), Tamb(700)
[ 1450.096435] sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), Health(Good), Cable(1)
[ 1450.120971] CPU1: Booted secondary processor
[ 1450.122131] Switched to NOHz mode on CPU #1
[ 1450.142974] CPU1 is up
[ 1450.719390] ab8500-fg ab8500-fg.0: [FG_DATA] 1618mAh/1700mAh 95% (Prev 1623mAh 95%) 4277mV -233mA -104mA -578 0 0 5 1 1 143 95 0 0 0
[ 1450.895233] ux500_pm_gpio_save_wake_up_status: bank6: 0x01000000
[ 1450.895416] Wakeup Status: 0x20000000
[ 1451.698974] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[ 1451.699005] pgd = e3d34000
[ 1451.699005] [00000010] *pgd=00000000
[ 1451.699035] Internal error: Oops: 5 [#1] PREEMPT SMP
[ 1451.699035] dbx500_dump notified of crash
[ 1451.701354] Modules linked in: dhd bthid param(P) j4fs(P)
[ 1451.701385] CPU: 1    Tainted: P        W    (3.0.31+ #1)
[ 1451.701415] PC is at disable_led_notification+0x34/0xc0
[ 1451.701446] LR is at notification_led_status_write+0x4c/0x110
[ 1451.701477] pc : [<c03717f0>]    lr : [<c0371a1c>]    psr: 200b0013
[ 1451.701477] sp : e3cffec0  ip : 00000000  fp : e3cffed4
[ 1451.701477] r10: c06b0758  r9 : e6584808  r8 : e658f8a8
[ 1451.701507] r7 : e39bee60  r6 : e3cfff78  r5 : e39bee78  r4 : c0fa9460
[ 1451.701507] r3 : 00000001  r2 : 00000000  r1 : c086dd43  r0 : 00000001
[ 1451.701538] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[ 1451.701538] Control: 10c5787d  Table: 23d3404a  DAC: 00000015
[ 1451.701568] 
[ 1451.701568] PC: 0xc0371770:
(... dump data ...)
[ 1451.706420] [<c03717f0>] (disable_led_notification+0x34/0xc0) from [<c0371a1c>] (notification_led_status_write+0x4c/0x110)
[ 1451.706451] [<c0371a1c>] (notification_led_status_write+0x4c/0x110) from [<c0353878>] (dev_attr_store+0x28/0x34)
[ 1451.706481] [<c0353878>] (dev_attr_store+0x28/0x34) from [<c01bad5c>] (sysfs_write_file+0x178/0x1a8)
[ 1451.706512] [<c01bad5c>] (sysfs_write_file+0x178/0x1a8) from [<c01633fc>] (vfs_write+0xac/0x150)
[ 1451.706542] [<c01633fc>] (vfs_write+0xac/0x150) from [<c01636b4>] (sys_write+0x48/0x80)
[ 1451.706573] [<c01636b4>] (sys_write+0x48/0x80) from [<c0067a00>] (ret_fast_syscall+0x0/0x30)
[ 1451.706573] Code: e5d43008 e3530000 0a000017 e594c00c (e59c2010) 
[ 1451.706603] CPU0: stopping
[ 1451.706634] [<c006f00c>] (unwind_backtrace+0x0/0x144) from [<c0670c34>] (dump_stack+0x20/0x24)
[ 1451.706665] [<c0670c34>] (dump_stack+0x20/0x24) from [<c0060694>] (do_IPI+0x200/0x23c)
[ 1451.706695] [<c0060694>] (do_IPI+0x200/0x23c) from [<c006744c>] (__irq_svc+0x4c/0xe8)
[ 1451.706695] Exception stack(0xc0939e80 to 0xc0939ec8)
[ 1451.706726] 9e80: c0fd1d34 600f0093 00000001 00000000 6817667c 00000048 00000f23 00000001
[ 1451.706726] 9ea0: 67dc4498 00000048 00000001 c0939f5c c0939e50 c0939ec8 c04361c0 c04334a0
[ 1451.706756] 9ec0: 600f0013 ffffffff
[ 1451.706787] [<c006744c>] (__irq_svc+0x4c/0xe8) from [<c04334a0>] (enter_sleep+0x3ec/0x7e0)
[ 1451.706787] [<c04334a0>] (enter_sleep+0x3ec/0x7e0) from [<c0430f54>] (cpuidle_idle_call+0xc8/0x2fc)
[ 1451.706817] [<c0430f54>] (cpuidle_idle_call+0xc8/0x2fc) from [<c0068a30>] (cpu_idle+0xcc/0x120)
[ 1451.706848] [<c0068a30>] (cpu_idle+0xcc/0x120) from [<c065ef3c>] (rest_init+0x94/0xac)
[ 1451.706878] [<c065ef3c>] (rest_init+0x94/0xac) from [<c0008a90>] (start_kernel+0x3fc/0x490)
[ 1451.706878] [<c0008a90>] (start_kernel+0x3fc/0x490) from [<00008040>] (0x8040)
[ 1451.707031] fd_line_length=1920
[ 1451.707031] Oops
[ 1451.707061] Kernel panic!!. Please connect the phone to PC
[ 1451.707244] enable capture and press the volume down key to get the
[ 1451.707458] kernel log.  Repeat if required.
[ 1451.707550] Press volume up to enter upload mode.
[ 1451.717437] Board Information: UX500: 6C, cpu U8500 ES178
[ 1451.717468] ---[ end trace 2b6060ff815a1cef ]---
[ 1451.717468] Kernel panic - not syncing: Fatal exception
[ 1451.717529] [<c006f00c>] (unwind_backtrace+0x0/0x144) from [<c0670c34>] (dump_stack+0x20/0x24)
[ 1451.717559] [<c0670c34>] (dump_stack+0x20/0x24) from [<c06710fc>] (panic+0x80/0x2c0)
[ 1451.717590] [<c06710fc>] (panic+0x80/0x2c0) from [<c006bad4>] (die+0x1dc/0x214)
[ 1451.717590] [<c006bad4>] (die+0x1dc/0x214) from [<c0670c9c>] (__do_kernel_fault.part.2+0x64/0x84)
[ 1451.717620] [<c0670c9c>] (__do_kernel_fault.part.2+0x64/0x84) from [<c0073980>] (do_page_fault+0x278/0x378)
[ 1451.717651] [<c0073980>] (do_page_fault+0x278/0x378) from [<c0073bc0>] (do_translation_fault+0xa8/0xb0)
[ 1451.717681] [<c0073bc0>] (do_translation_fault+0xa8/0xb0) from [<c0060218>] (do_DataAbort+0x44/0xac)
[ 1451.717681] [<c0060218>] (do_DataAbort+0x44/0xac) from [<c00673d0>] (__dabt_svc+0x70/0xa0)
[ 1451.717712] Exception stack(0xe3cffe78 to 0xe3cffec0)
[ 1451.717712] fe60:                                                       00000001 c086dd43
[ 1451.717742] fe80: 00000000 00000001 c0fa9460 e39bee78 e3cfff78 e39bee60 e658f8a8 e6584808
[ 1451.717742] fea0: c06b0758 e3cffed4 00000000 e3cffec0 c0371a1c c03717f0 200b0013 ffffffff
[ 1451.717773] [<c00673d0>] (__dabt_svc+0x70/0xa0) from [<c03717f0>] (disable_led_notification+0x34/0xc0)
[ 1451.717803] [<c03717f0>] (disable_led_notification+0x34/0xc0) from [<c0371a1c>] (notification_led_status_write+0x4c/0x110)
[ 1451.717834] [<c0371a1c>] (notification_led_status_write+0x4c/0x110) from [<c0353878>] (dev_attr_store+0x28/0x34)
[ 1451.717864] [<c0353878>] (dev_attr_store+0x28/0x34) from [<c01bad5c>] (sysfs_write_file+0x178/0x1a8)
[ 1451.717864] [<c01bad5c>] (sysfs_write_file+0x178/0x1a8) from [<c01633fc>] (vfs_write+0xac/0x150)
[ 1451.717895] [<c01633fc>] (vfs_write+0xac/0x150) from [<c01636b4>] (sys_write+0x48/0x80)
[ 1451.717926] [<c01636b4>] (sys_write+0x48/0x80) from [<c0067a00>] (ret_fast_syscall+0x0/0x30)
[ 1451.718048] machine_restart: lockup
[ 1451.718078] machine_restart: cmd: LockUp
[ 1451.718078] machine_restart: reboot_mode: L
[ 1451.718078] machine_restart: arm_pm_restart: 0xc0078380
[ 1451.718078] ux500_restart: Call arch_reset(), mode: L, cmd: LockUp
Click to expand...
Click to collapse

Next time you get a reboot turn off WiFi. Then see if after that it reboots? This is the same problem on my device. I just released a test build for them in which I think it's fixed.
 
  • Like
Reactions: pingguo
You must log in or register to reply here.

Similar threads

F
[ROM][CM10][CM10.1][CM-10.2][CM-11.0][GT-S7710] Samsung X Cover 2
Replies
380
Views
362K
E
ex-xt
F
[CWM][TWRP] For the Samsung X Cover 2 aka GT-S7710 aka skomer
Replies
127
Views
176K
W
Wagner.B
andrew551
[ROM][4.4.4]MIUIv5 4.10.21 GT-S7710
Replies
39
Views
68K
Win_7
Win_7
G
[ROM][GXperience][JB 4.2.1][STOCK][GT-S7710] Samsung X Cover 2
Replies
15
Views
39K
A
artfrik
E
[ROM][4.1.2]Otonrom[STOCK][Samsung X Cover 2 GT-S7710]
Replies
5
Views
13K
A
artfrik

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 55
    Unjustified Dev
    Unjustified Dev
    toast-bootanimation.gif

    Smooth like Butta

    Follow on G+: Team Vanir

    Vanir Team:
    NuclearMistake
    Sonicxml
    DHO
    PrimeDirective


    Not all features are available yet.


    Features:

    Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..

    What to expect:
    - This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
    - maximum optimization. We do our research. We test hard. We build -fstrict -O3 globally and include a massive array of code optimizations and memory leak fixes that we write ourselves and eventually submit to AOSP or Linaro.
    - originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
    - aesthetics.. hopefully in your opinion :p

    General features:
    stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
    enhanced performance.. longer uptime with less slowdown
    custom written CRON and init.d.
    UI and graphics improvements
    custom navbar, navring, and hardware key features
    improved notification handling (active display & halo are in review also)
    usability improvements like power reboot menu and sound
    animation control
    Improved Vanir keyboard
    CM's profiles & quicksettings
    additional quicksetting tiles
    immersive mode
    statusbar mods
    clock & battery mods
    lockscreen blur and other mods
    soon to come -> quick cam and flash notifications
    busybox, embedded root, init.d, cron etc
    yatta yatta yatta
    more to come when i feel like updating the op

    Changelog:
    **Vanir Open Status

    **Vanir Merged Status

    Vanir Downloads:

    **Nightlies

    Recovery Downloads:

    **CWM

    Vanir Github:
    **VanirAOSP Git

    Gapps:
    **4.4.2 PA Gapps


    Installation Instructions
    Make sure your using cwm above it's required
    Full wipe
    Install ROM
    Install Gapps

    Thanks
    TeamVanir
    Meticulus
    Everyone here for keeping me inspired

    Source
    Kernel
    Skomer device tree
    Common device/Codinalte
    Vendor
    View
    9
    Unjustified Dev
    Unjustified Dev
    Wifi fixed :)

    https://github.com/Team-Exhibit/vendor_samsung/commit/71e446b6871a252ab97de5cb66980b8d495e6cc6
    View
    7
    Unjustified Dev
    Unjustified Dev
    Changelog

    ** Initial Release **
    - Booting now.



    TODO:
    Fix wifi
    View
    7
    Unjustified Dev
    Unjustified Dev
    ...... Wifi reboot bug fixed :)

    Will be merged in next nightly which is actually available now

    https://github.com/Team-Exhibit/and...mmit/26d64af2b93a267137dbfbb9338058ff8f1864b3
    View
    6
    Unjustified Dev
    Unjustified Dev
    maurensen said:
    Using since yesterday and zero reboots .
    All I need is working: camera 3g Wi-Fi and GPS are all OK plus I like very much notification system on lock screen... And it's kitkat!
    So after installing xposed frame work for other little tweaks this is my everyday rom!
    Thanks to unjustified dev!

    Sent from my GT-S7710 using xda app-developers app
    Click to expand...
    Click to collapse

    Just wait :) nightlies with ota :D http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/skomer/

    I am going to be gone a while builds won't stop though
    View

New posts