HTC One SU (T528w)

bgcngm · Feb 3, 2013

Falseclock said:
and you need to relock bootloader, root and cwm as before

I was trying to install RUU with bootloader unlocked and it fails. It really only works with relocked bootloader. :good:

Falseclock said:
I think 1.13.1402.11 equals to 1.13.1402.2 (OTA_CP2_DUG_ICS_40_HTCCN_CHS_CU_1.13.1402.11-1.13.1402.2_release_305561pj0nmciz0veopwxv.zip)

difference only in which way rom was installed, by fota update of by ruu flashing

if so, then 1.13.1402.11 - is FOTA, and 1.13.1402.2 - original ruu rom

previous version was 1.05.1402.3

I'm not sure anymore about that... After installing 1.13.1402.2 RUU, I have still received 1.13.1402.11 FOTA. I'm installing it right now.

ma0572 · Feb 3, 2013

install PM60IMG_1.13.1402.2_decrypted

Hallo all,

im to stupid...can somebody explain me how to install PM60IMG_1.13.1402.2_decrypted :crying:

Thank you all for your nice work :laugh:

bgcngm · Feb 3, 2013

bgcngm said:
Falseclock said:

I found the way how to LOCK, UNLOCK, RELOCK device without htcdev and unlock token.
do you want to help with investigation how to make S-OFF?

Click to expand...

Click to collapse

Sure, I can help you through with the investigation. I will dump my eMMC partitions and upload it when finished.

I have sent you the link to my dump via PM because some partition may contain specific information about my phone. It includes all partitions except boot, recovery, system, userdata, cache and fat.

Falseclock · Feb 3, 2013

1. difference in mmcblk0p23 (misc), i think it is unique token

2. difference in mmcblk0p26 (modemfs), think not related to S-OFF, completely different.

3. difference in mmcblk0p28 (cspsa0), think also not related to S-OFF, difference to big

4. diffrenece in mmcblk0p3 (unknown), first part contains CID, second IMEI

5. difference in mmcblk0p30 (local), can't comment

6. difference in mmcblk0p31 (devlog), should not be related to S-OFF

7. diffrenece in mmcblk0p4 (unknown), can not comment

8. diffrenece in mmcblk0p5 (unknown), too many diffs

9. diffrenece in mmcblk0p8 (unknown), related to lock status and seems to be to S-OFF

my opinion S-OFF stored in mmcblk0p8

P.S. S-OFF on the right panell ))))

Falseclock · Feb 3, 2013

having UNLOCKED + S-OFF

1. putted decrypted rom on flash card
2. flashed through hboot
3. started up, setup and then made it LOCKED via fastboot
4. updated to 11 release by fota
5. UNLOCKED
6. rooted
7. dumped

there are also

Code:

brw------- root     root     179,   0 2013-02-04 02:16 mmcblk0
brw------- root     root     179,  64 2013-02-04 02:16 mmcblk0boot0
brw------- root     root     179, 128 2013-02-04 02:16 mmcblk0boot1
...
brw------- root     root     179, 192 2013-02-04 02:16 mmcblk1
brw------- root     root     179, 193 2013-02-04 02:16 mmcblk1p1
brw------- root     root       1,   0 2013-02-04 02:16 ram0
brw------- root     root       1,   1 2013-02-04 02:16 ram1
brw------- root     root       1,  10 2013-02-04 02:16 ram10
brw------- root     root       1,  11 2013-02-04 02:16 ram11
brw------- root     root       1,  12 2013-02-04 02:16 ram12
brw------- root     root       1,  13 2013-02-04 02:16 ram13
brw------- root     root       1,  14 2013-02-04 02:16 ram14
brw------- root     root       1,  15 2013-02-04 02:16 ram15
brw------- root     root       1,   2 2013-02-04 02:16 ram2
brw------- root     root       1,   3 2013-02-04 02:16 ram3
brw------- root     root       1,   4 2013-02-04 02:16 ram4
brw------- root     root       1,   5 2013-02-04 02:16 ram5
brw------- root     root       1,   6 2013-02-04 02:16 ram6
brw------- root     root       1,   7 2013-02-04 02:16 ram7
brw------- root     root       1,   8 2013-02-04 02:16 ram8
brw------- root     root       1,   9 2013-02-04 02:16 ram9
drwxr-xr-x root     root              2013-02-04 02:17 vold
brw------- root     root     253,   0 2013-02-04 02:16 zram0

and may be something written there, who knows.

---------- Post added at 02:25 AM ---------- Previous post was at 02:22 AM ----------

ma0572 said:
Hallo all,

im to stupid...can somebody explain me how to install PM60IMG_1.13.1402.2_decrypted :crying:

Thank you all for your nice work :laugh:

if you are UNLOCKED, make it RELOCKED, rename to PM60IMG.zip, put on flashcard and then boot into hboot

result please put here

Falseclock · Feb 3, 2013

by the way, forgot to announce )))

see attached screenshots )))

this is like a custom rom, european firmware, fully with all GAPPS, Dropbox and other stuff, absolutely translated and deodexed.

It seems I found how to make google visible ))) but some hardware can still have troubles, like camera or bluetooth. did not fully tested yet. But seems it is fully working.

bgcngm · Feb 3, 2013

Falseclock said:
my opinion S-OFF stored in mmcblk0p8

Hmmmm... so, what's your idea? To send me your mmcblk0p8 dump so that I can try flashing it into my phone?

Falseclock said:
if you are UNLOCKED, make it RELOCKED, rename to PM60IMG.zip, put on flashcard and then boot into hboot

result please put here

It doesn't work, I have tried. With S-ON, only stock (crypted) RUU can be installed via HBOOT (relocked, off course).

Falseclock · Feb 3, 2013

bgcngm said:
Hmmmm... so, what's your idea? Send me your mmcblk0p8 dump so that I can try flashing it into my phone

http://virtex.kz/mmcblk0p8

go ahead )))

---------- Post added at 03:16 AM ---------- Previous post was at 03:13 AM ----------

bgcngm said:
It doesn't work, I have tried. With S-ON, only stock (crypted) RUU can be installed via HBOOT (relocked, off course).

seems only S-OFF can use decrypted rom for flashing

FYI hboot stored in mmcblk0p7 and for LOCKED, UNLOCKED, RELOCED - it is always the same

bgcngm · Feb 3, 2013

Okay, tried to flash /dev/block/mmcblk0p8:

Code:

dd if=/sdcard/mmcblk0p8 of=/dev/block/mmcblk0p8
64+0 records in
64+0 records out
32768 bytes (32.0KB) copied, 0.008148 seconds, 3.8MB/s

The result seems to be successful, but nothing changes. After dumping back /dev/block/mmcblk0p8 I notice that nothing has been flashed.

Any other suggestion?

Falseclock · Feb 3, 2013

bgcngm said:
The result seems to be successful, but nothing changes. After dumping back /dev/block/mmcblk0p8 I notice that nothing has been flashed.

Any other suggestion?

no any unfortunately. need to investigate how to write partition as it was with google. if you only knew how many times I flashed and restored my phone )) more than 50 times I think

and it is very strange you are not reacting on the news. You was waiting this so long time )))

bgcngm · Feb 3, 2013

Falseclock said:
It seems I found how to make google visible ))) but some hardware can still have troubles, like camera or bluetooth. did not fully tested yet. But seems it is fully working.

I'm reacting right now.

How have you done it? I didn't really wanted to port a ROM from another similar device just to have Google account appearing on account settings... because as you mentioned, it may break other features of the phone.

If you have found out what the solution is, can you just share it? I can easily do it myself.

florinfilipovici · Feb 6, 2013

Recovery problem

catalinburtea said:
Hello again!
I also downloaded that ROM and tried to flash it with CWM, but it didn't work, I think there may be something wrong with my phone - still, I'm glad factory reset still works. As for the OTA, I already gave it up.
As I was saying in a previous post I'm very unhappy about my phone charging so slow, which is starting to make me grow tired of it and think about selling it.
Anyway, I'm glad to see that you're still on the job, being one of the most active in this thread.

Hello, I am a fresh owner of a ONE SU made specially for CHINA Unicom - I bought it from China.
I saw the threads in the forum and I said that I should al least try to enter the service menu of the phone, with to see how it's done.
No problem there, power+volume, and there I was. I tried the recovery menu and there I saw the first problem. The phone started to show on the screen only some weird lines, I couldn't see anything. Took out the battery, restarted. I thing I had to do this twice, not sure. I said then there must be an issue with the stock recovery and then I decided to unlock the bootloader as on htcdev. - no problem there. I rooted the phone, like in the guides on the forum - no problem there. It came the moment I wanted to install CWM - I tried the same procedure several times. No errors, but each time I entered the recovery menu, after the phone entered in this menu, the screen went crazy, I couldn't see anything, so I had to take out the battery, twice and then I was able to start the phone. So NO CWN - NO GAPPS. - Is there another way to install GAPPS other then using CWM? and another thing, today the phone started behaving rather peculiar, I see a RED borderline popping on the phone quite frequently.
It's driving me mad. Can I do something to fix this? Can I wipe clean the phone and then install everything form scratch.

Thanks a lot.
P.S. I just started working with this, so all is new to me. Please have patience. I have a lot of questions.

---------- Post added at 02:12 PM ---------- Previous post was at 01:56 PM ----------

florinfilipovici said:
Hello, I am a fresh owner of a ONE SU made specially for CHINA Unicom - I bought it from China.
I saw the threads in the forum and I said that I should al least try to enter the service menu of the phone, with to see how it's done.
No problem there, power+volume, and there I was. I tried the recovery menu and there I saw the first problem. The phone started to show on the screen only some weird lines, I couldn't see anything. Took out the battery, restarted. I thing I had to do this twice, not sure. I said then there must be an issue with the stock recovery and then I decided to unlock the bootloader as on htcdev. - no problem there. I rooted the phone, like in the guides on the forum - no problem there. It came the moment I wanted to install CWM - I tried the same procedure several times. No errors, but each time I entered the recovery menu, after the phone entered in this menu, the screen went crazy, I couldn't see anything, so I had to take out the battery, twice and then I was able to start the phone. So NO CWN - NO GAPPS. - Is there another way to install GAPPS other then using CWM? and another thing, today the phone started behaving rather peculiar, I see a RED borderline popping on the phone quite frequently.
It's driving me mad. Can I do something to fix this? Can I wipe clean the phone and then install everything form scratch.

Thanks a lot.
P.S. I just started working with this, so all is new to me. Please have patience. I have a lot of questions.

I solved the RED borderline issue. I had activated the Strict mode enabled in settings->developer options. I deactivated and now all is OK.

yavuzyaman · Feb 6, 2013

florinfilipovici said:
Hello, I am a fresh owner of a ONE SU made specially for CHINA Unicom - I bought it from China.
I saw the threads in the forum and I said that I should al least try to enter the service menu of the phone, with to see how it's done.
No problem there, power+volume, and there I was. I tried the recovery menu and there I saw the first problem. The phone started to show on the screen only some weird lines, I couldn't see anything. Took out the battery, restarted. I thing I had to do this twice, not sure. I said then there must be an issue with the stock recovery and then I decided to unlock the bootloader as on htcdev. - no problem there. I rooted the phone, like in the guides on the forum - no problem there. It came the moment I wanted to install CWM - I tried the same procedure several times. No errors, but each time I entered the recovery menu, after the phone entered in this menu, the screen went crazy, I couldn't see anything, so I had to take out the battery, twice and then I was able to start the phone. So NO CWN - NO GAPPS. - Is there another way to install GAPPS other then using CWM? and another thing, today the phone started behaving rather peculiar, I see a RED borderline popping on the phone quite frequently.
It's driving me mad. Can I do something to fix this? Can I wipe clean the phone and then install everything form scratch.

Thanks a lot.
P.S. I just started working with this, so all is new to me. Please have patience. I have a lot of questions.

---------- Post added at 02:12 PM ---------- Previous post was at 01:56 PM ----------

I solved the RED borderline issue. I had activated the Strict mode enabled in settings->developer options. I deactivated and now all is OK.

SOLVED THE PROBLEM WITH DETAILED HOW you tell

4EJLO6PEK · Feb 7, 2013

Hello, has anyone ever encountered the problem of connection of the Bluetooth headset in the A2DP mode, I have when connecting writes connected except A2DP. can driver what to put or something

florinfilipovici · Feb 7, 2013

yavuzyaman said:
SOLVED THE PROBLEM WITH DETAILED HOW you tell

The red borderline issue was caused by me selecting in the setting ->developer options -> Strict mode enabled.
For more details, if needed, google (HTC red borderline or strict mode enabled).

---------- Post added at 05:18 PM ---------- Previous post was at 05:00 PM ----------

Hello ,

My current problem with my T528W is that recovery mode is not working. When I try to enter it the phone starts, I see the welcome screen, and then when it enters the recovery mode the screen goes all white with some stripes. I can see anything, it look like the screen is broken.
So recovery is not working for me. Other than that I don't have any problems - not that I can see.
Can some please tell me what I can do to solve this?

Thanks.

OneSU · Feb 9, 2013

florinfilipovici said:
The red borderline issue was caused by me selecting in the setting ->developer options -> Strict mode enabled.
For more details, if needed, google (HTC red borderline or strict mode enabled).

---------- Post added at 05:18 PM ---------- Previous post was at 05:00 PM ----------

Hello ,

My current problem with my T528W is that recovery mode is not working. When I try to enter it the phone starts, I see the welcome screen, and then when it enters the recovery mode the screen goes all white with some stripes. I can see anything, it look like the screen is broken.
So recovery is not working for me. Other than that I don't have any problems - not that I can see.
Can some please tell me what I can do to solve this?

Thanks.

There are at least 2 versions of the recovery program, PA2, PB1. I've tried on PA2 and got the same problem as your. I tried on PB1 and there is no problem. One of them may work on your system. You may found them here. Both of them are in this thread.

Falseclock · Feb 11, 2013

i'm not java programmer and can not identify the problem,
but once this app will be launched on our device as system app, google will be visible in synch

Code:

D:\adb>adb shell
$ su
su
# am start com.google.android.gsf.login
am start com.google.android.gsf.login
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] pkg=com.google.android.gsf.login }
Error: Activity not started, unable to resolve Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 pkg=com.google.android.gsf.login }

#

<<<--- LOGCAT --->>>
E/ActivityManager( 1817): startLaunchActivity get appname failed
E/ActivityManager( 1817): java.lang.NullPointerException
E/ActivityManager( 1817):       at com.android.server.am.ActivityStack.startLaunchActivity(ActivityStack.java:4888)
E/ActivityManager( 1817):       at com.android.server.am.ActivityStack.startActivityMayWait(ActivityStack.java:3417)
E/ActivityManager( 1817):       at com.android.server.am.ActivityManagerService.startActivity(ActivityManagerService.java:2520)
E/ActivityManager( 1817):       at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:131)
E/ActivityManager( 1817):       at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:1762)
E/ActivityManager( 1817):       at android.os.Binder.execTransact(Binder.java:338)
E/ActivityManager( 1817):       at dalvik.system.NativeStart.run(Native Method)

bugunjito · Feb 12, 2013

problems with caller id and cell broadcast

Hi dears,

I have also this device and am having trouble with caller ID, example: in my contacts, a person has the number as 88883333, but the carrier identifies as 07188883333, the device does not associate the call and is showing as unknown contact, at other android devices, including my Lenovo a789 it did not happen, I dont know how to solve, not wanted to change all my contacts and put the 071 at first which is the area code. Another problem I face is an sms informing the carrier throughout the area now that I am, 2 by 2 min,'ve seen on the internet that is only an option to disable the menu links, such CB or cell broadcast, the problem is that this option does not appear for me in this rom, where is this option in this rom? I do not know what to do with these problems ... i use stock rom i think.

android version: 4.0.4
htc sense: 4.1
software number: 1.13.1402.11
htc sdk: 4.25
htc extension: HTCEXTENSION_403_1_GA_26
baseband version: 553.13.03.00-6.1212.14.12

bugunjito · Feb 12, 2013

about clean rom from htc

bugunjito said:
Hi dears,

I have also this device and am having trouble with caller ID, example: in my contacts, a person has the number as 88883333, but the carrier identifies as 07188883333, the device does not associate the call and is showing as unknown contact, at other android devices, including my Lenovo a789 it did not happen, I dont know how to solve, not wanted to change all my contacts and put the 071 at first which is the area code. Another problem I face is an sms informing the carrier throughout the area now that I am, 2 by 2 min,'ve seen on the internet that is only an option to disable the menu links, such CB or cell broadcast, the problem is that this option does not appear for me in this rom, where is this option in this rom? I do not know what to do with these problems ... i use stock rom i think.

android version: 4.0.4
htc sense: 4.1
software number: 1.13.1402.11
htc sdk: 4.25
htc extension: HTCEXTENSION_403_1_GA_26
baseband version: 553.13.03.00-6.1212.14.12

advantage, I wonder if there is a stock rom for this device because I believe that came with mine was a version of a carrier chinese with multiple Chinese applications that i could erase with a tool with power root permissions, anyone know of a rom that is htc own without interference from any carrier? and how to put it on my device?

Falseclock · Feb 12, 2013

bgcngm said:
If you have found out what the solution is, can you just share it? I can easily do it myself.

You better to fully deodex your rom (optional), then put needed gapps apks and then resign all apks with shared UID.

Update script must be signed with the same key/certificate!
User data/cache/secure wipe is mandatory!
ramdisk must be repacked with turned on ADB debugging for emergency cases.

The main issue why we can't see google is GoogleLoginService.apk which uses shared user uid, but has different signature.

shared UID apks can be identified with

adb shell dumpsys package
or
adb pull /data/system/packages.xml

P.S. You can use kitchen to simplify whole process.

P.P.S. Gonna release own update script in the end of the week with aroma installer. Now testing installation of stock applications like Flickr, Dropbox, Picasa, Evernote and others. Afterwards hope will fully translate firmware and release custom ROM based on stock Chinese. Waiting when rom crypting will be supported by ruuveal

HTC One SU (T528w)

Recognized Developer

New member

Recognized Developer

Senior Member

Attachments

Senior Member

Senior Member

Attachments

Recognized Developer

Senior Member

Recognized Developer

Senior Member

Recognized Developer

New member

Member

New member

New member

Member

Senior Member

Attachments

Member

Attachments

Member

Senior Member

Similar threads

Top Liked Posts