Flashed the latest version and it broke xposed :S All my settings/apps are back to default 320dpi.
GPS works for me with this kernel.. You wipe cache/dalvik and perform a full SHUTDOWN (not reboot)?? Did you wait the full 5 minutes or so after flashing the kernel before messing with the phone?
helps give the system time to settle in, all scripts to do their thing, etc.
Will have to forgive me for not reading the entire thread to see if this was brought up or not... Running jedi xpx and latest kernel my gyroscope was going crazy in the camera app.... Couldn't decide if it was in landscape or portrait. Installed the factor kernel and it stopped. Complete wipe and reload of jedi has it doing the same thing... Install factory kernel and it stops again
Sent from my SGH-I317 using Tapatalk 2
Anyone having this same issue or just an issue I had? Makes a difference if I continue with this kernel or go back to some previous ones I have tried. Sorry for the quote post but didn't get a single response.
Sent from my SGH-I317 using Tapatalk 2
Tried re flashing the kernel doing as conservative an approach as possible.
Wipe cache and dalvik
Flash the kernel
Power off completely
Boot in to system
Wait 30 minutes, not touching anything.
Full power off.
Boot in to system and let it sit not touching for 30 minutes.
Restart phone let sit for 30 minutes, then start using it.
Still having Max cpu frequency issues
Sent from my SGH-I317m using xda app-developers app
Also I have found something that may be a coincidence or maybe not. It seems to fix itself after 10 minutes
Sent from my SGH-I317 using xda app-developers app
do you suggest applying the CPU boot settings "on boot completed" or "init.d script"
---------- Post added at 03:51 PM ---------- Previous post was at 03:35 PM ----------
oh trust me I know. I just have tried so many things that I was thinking that by doing 30 minute breaks it'll surely give it enough time to sink in!!! haha
Now i'm just sitting around with my battery out for 5 minutes to finish...
run a battery of diagnostics at it, let it rest for 10-15 minutes, watch youtube for a bit, do real world things on it for a bit, and then check time in state.
Also... Do you have an CPU profiles in place?
What kind of diagnostics are you suggesting?
No i don't have any CPU profiles in place.
Ya it looks like yours isn't having the same issue. I wouldn't really care except for the fact that it drains battery and makes the phone really hot which I know is not the best. It's fine after those first 10 minutes but it almost seems like it is forcing a version of performance for 10 minutes before going back to normal
Sent from my SGH-I317 using xda app-developers app
What is your phone temp? Mine usually sits around 37C. And it peaks for 10 min at 1.6Ghz for you only after reboot then fine after until the next reboot?
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release