[ How-To ] Fix SD card not being detected & USB port not working
- Thread starter Calkulin
- Start date
Can this still apply is this method working with new ROM's
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
Do you have a idea of external sdcard not reading
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
When fully booted up an in the device storage section their is no external SD card slot at all , it don't exist
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
This is on lineage 14.1
---------- Post added at 02:44 PM ---------- Previous post was at 02:43 PM ----------
Any help would be great !
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
Do you have a idea of external sdcard not reading
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
When fully booted up an in the device storage section their is no external SD card slot at all , it don't exist
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
This is on lineage 14.1
---------- Post added at 02:44 PM ---------- Previous post was at 02:43 PM ----------
Any help would be great !
It should still work... but are you running liniage 14 on an EVO supersonic? How did you do that?
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
13Decided to update the instructions for this fix.
Thx to sruon for the fix
Original instructions pulled from IEFtm's post @ Modaco
These fixes require the Android SDK and very basic ADB knowledge. You can copy and paste for most.
Make sure in device manager the driver for fastboot is installed (Win 7 downloads them automatically)
For USB fix
Download the flash_image & mtd-eng.img attached, unzip them and put them on the SD card before starting
SD Card Fix
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
ADB commands
fastboot oem enableqxdm 0
fastboot reboot
That should fix your SD card not being detected.
USB Fix * Root REQUIRED *
Update - Some have reported that updating the radio fixes this, so if this guide doesn't work, try that
Run from a terminal emulator in Android since ADB won't work if the USB port is not working
Terminal emulator & ADB commands
su
cat /sdcard/flash_image > /data/flash_image
cat /sdcard/mtd-eng.img > /data/mtd-eng.img
chmod 755 /data/flash_image
/data/flash_image misc /data/mtd-eng.img
reboot
And that should fix the USB issue1Thanks for this mate. Worked like a charm... even with your files, I didn't need to muck around with the generator or a hex editor. I will tell you this tho, I dont ever wanna do that again. 10 minutes to type 5 command lines in a shell on an Evo sucks hard.1
Happened to me as well. I had to back up my card to my pc and format it to get it to work again.1
You need to have your Evo connected to the computer via USB. You also need to have the fastboot binary on your computer (install the android sdk tools if you haven't already). Then from your bootloader, select the 'fastboot' option. That will put your Evo in fastboot usb mode. Now, open up a command prompt on your computer, and enter the commands from the terminal. To check if your phone is detected before entering the commands, type 'fastboot devices' then hit enter. If your phone is detected, the command prompt should output your phone's serial number. If so, then you're good to go ahead and enter the commands. Good luck.1This might be a backwards fix but has anyone tried running a RUU to see if it fixes that.I remember having that problem awhile ago,and I'm kinda sure that's how I fixed it. If anyone wants to give it a go here's the newest one, you will have to reroot but you'll stay s-off...
http://db.tt/x4eoGH6G
