[01/03] Version 2.1.6 :
- back to gcc linaro 4.7.3 (giving better results and stability)
- Dynamic fsync re-added and activated by default
- Lots of mm & internal changes for stability and performance
- logger: reduce reserved memory
- battery: ignore unstable power & ignore safety margin are now switchable via Stweaks
- cpufreq: tweaked governors and re-added smartassV2
- block: tweaked schedulers & added bfq (thx
@andiP)
- camera: hopefully fixed camera occasional crash
- linux: back to standard kernel naming showing proper version number
- Fixed some occasional apps crash (like antutu x & megapolis ...)
- gpu: using simpler gpu control (thx
@andiP)
- Stweaks: Added Min CPU Lock control to CPU tab
- Stweaks: Added "Apply" button to governors tabs
- Stweaks: Added ZRAM switch to Misc tab (on/off for sammy roms only)
- Stweaks: Fine tuned pegasusQ & GPU default values
OUF !
[15/02] Version 2.1.5 :
- Patched to latest samsung source drop XXUGML3 :good:
- using gcc linaro 4.8.3 2014.02 optimized for cortex-a9 (thx
@Christopher83)
- Added configurable led behavior + led fading support (thx
@AndreiLux)
- Added MDNIE full control (thx
@AndreiLux &
@DerTeufel1980)
- hdmi: fix sound output not working
- fix TriangleAway support (thx
@DerTeufel1980)
- sched: reduced latency for better responsiveness
- cpufreq: reverted hack preventing max freq override (so expect some 1.5 & 1.6 ghz in stats, but it's soooo smooth)
- fsync: completely removed dynamic fsync
- tweaked lowmemorykiller & mm
- fixed problem of wifi not working on some roms
- Added Carbon rom support
- Updated ramdisks
[19/01] Version 2.1.4 :
- Re-patched from scratch to linux 3.0.101
- mm: lot of changes to match 3.0.101
- arm: L1 cache optimization 2/2 : use correct L1 cache shift (5->6)
- busfreq: back to stock slope usage (correct scaling)
- wireless: Fix a memory leak
- mm/page_io: prevent keeping duplicated compressed pages in memory
- mali: Disable state_tracking
- battery: raised max charge current to 1100 mA (for USB and wireless)
PS: please confirm that you feel the performance boost (or not) !!!
[09/01] Version 2.1.3 :
- Updated gcc to linaro 4.8.3 (12.2013) :good:
- block: Update row scheduler & blk-core
- block: tweak cfq, deadline, sio, vr & zen schedulers
- ScoobyDoo sound: fix engine not activated
- random-char: raise read from 64 to 256 and write from 128 to 512
- battery: ignore charger unstable power
- rwsem: implement RWSEM_XCHGADD & steal writing sem (for better performance)
- arm: L1 cache optimization
- mmc: TriangleAway support & disable CRC (for better performance)
- wireless: reduce wakelock timeout ( x/4 )
- Enable USB OTG support
- Disable ALL Samsung Rooting Restriction Features
- Updated omni & cm11 ramdisks
- sammy43: raise compcache size from 300 to 400 mb
[29/12] Version 2.1.2 :
- Fully merged Update13 changes
-
CM: fix camera video recording (ported from Googy-Max (thx Gokhanmoral)) :good:
- CM: Fix some camera crash due to firmware date
- pegasusq: add prev_cpu_wall_delta
- sched: add time-based average load
- Re-enable Touchboost control (ported from Googy-Max (thx Gokhanmoral))
- mach-exynos: Correct min_uV & max_uV limits for proper voltage control
- block: Add Zen scheduler (thx Yank555)
- Stweaks: fixed the apk install and moved it from system partition to data
- Some minor tweaks
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[22/12] Version 2.1.1 :
- Stweaks: Add vibration intensity control to misc tab
- Stweaks: Correct tweaked abb values
- Stweaks: Moved undervolted and tweaked CPU/GPU/ABB to "battery" profile to keep "balanced" profile as close to stock as possible
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[21/12] Version 2.1.0 :
- Cypress: make touchkeys backlight work on sammy & cm11
& temasek/omni
- char: add frandom support (thx
@Yank555)
- Stweaks: do not install STweaks_Googy-Max if STweaks is already installed
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[21/12] Version 2.0.9 :
-
Patched to Samsung Update13 :good:
- Cypress: make touchkeys backlight work on sammy & cm11
- CPU undervolting implementation ported from Googy-Max :good:
- ABB implementation ported from Googy-Max :good:
- GPU control implementation ported from Devil's kernel (thx
@DerTeufel1980 &
@Yank555)
- cm11: fix for some cases of front camera crash (cm)
- cm11: make vibrator configurable
- cm11: fix battery gauge problem
- fix loss of baseband on sammy4.3
- Stweaks: ABB tweaked +GPU & CPU are ALREADY UNDERVOLTED (and stable
)
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[15/12] Version 2.0.8 :
-
FULLY WORKING DUAL BOOTING Sammy4.3 / CM11/ Omni / Temasek (with r3p2 mali support)
-
Compiled with GCC Linaro 4.8.2 :good:
- Bring back
dual sound engines (ScoobyDoo / Wolfson)
- Fix MTP for dualboot
- cm11 : fix network arrows not showing correctly
- busfreq: correct usage of cpu load slope
- touchkey backlight: little modification for dualboot support
- Some minor tweaks
-
@DerTeufel1980 recovery support (reboot choice)
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[23/11] Version 2.0.7 :
-
FULLY WORKING DUAL BOOTING Sammy4.3 / Temasek 4.4 v5 and above (with r3p2 mali support)
- zram: back to stock
- some mali changes
- Replace Boeffla sound engine with Wolfson sound engine (& added stweaks tab)
- cpufreq: renamed pegasusq to pegasusqstock and implement Googy-Max tweaked pegasusq
- mach-midas: cpu throttle from 800 to 1000MHz when reaching max thermal limit (thx
@brujo55 for the advise)
- Reverted a lot of changes which were causing lags
Important: Dual booting choice at startup isn't working ! Please use stweaks to choose your defaultrom or to reboot directly to the desired rom
ATTENTION : Dualboot isn't working for now ...
[18/11] Version 2.0.6a :
- stweaks: add wireless charge rate
- some performance tweak
[18/11] Version 2.0.6 :
- mm: some more changes
- Added cpu topology & various sched tweaks
- Fixed zram settings not applied
[17/11] Version 2.0.5 :
- Add TriangleAway support
- Optimize read speed of schedulers (cfq, deadline, sio, vr)
- Add j4fs support
- Some more changes from XXUGMJA kernel (mm, lmk, mmc)
- Enable Cleancache & disable CONFIG_SCHED_AUTOGROUP
- Add Xpad support
- Add network filesystems support (nfs, cifs, sunrpc)
- zram: disable debugging & zram_for_android
- Stweaks: Zram is now configurable BUT disabled by default (RAM management is way better without it)
[14/11] Version 2.0.4 :
- Updated to latest XXUGMJA ramdisk & GPU driver
- Cpu OC support (up to 1600Mhz)
- Updated gcc compiler to 4.7.4 2013.10
WakeUp lag IS gone and battery drain IS normal !!! (please confirm)
[13/11] Version 2.0.3 :
- Implement Touch to Wake
- busfreq: Disable BUSFREQ_INTERLOCK_CPUFREQ (fly fly baby
)
- earlysuspend: Remove zram conditional optimize_comp
- mm: back to stock memory management
WakeUp lag seems to be gone same as battery drain !!!
(please report anyway)
[10/11] Version 2.0.2 :
- Zram: back to stock zram 300MB (compcache)
- Activated Unaligned memory access & neon & hardfloat support
- Implement forced fast charge (thx Yank555)
- fs: Enable AIO
- sched_features: Disable GENTLE_FAIR_SLEEPERS & enable ARCH_POWER
- busfreq: Use cpu_load_slope correctly
- sys: Remove "Samsung Rooting Restriction Feature"
- ramdisk (sammy4.3): Various tweaks and corrections
- STweaks: Various tweaks and corrections
[08/11] Version 2.0.1 :
- Wireless: Disable multicast on suspend & Allow mac adress change
- ExFAT as external module and loaded at boot
- Permanent TRIM
- Reverted dual sound system and switched to Boeffla sound 1.6.4 (use Boeffla sound app for settings)
- Page-writeback interval: screen on 0ms off 500ms
- Removed "Samsung Rooting Restriction Feature"
- Auto-root is now disabled by default
- Hopefully fixed drain issue and deepsleep problem
[08/11] Version 2.0.0 :
-
Updated to linux 3.0.101 (EOL)
- Set fbearlysuspend via sysfs (for CRT animations)
- Added governors : Add ondemand-smartassV2-zzmoove-lulzactiveq-hotplug
- Added IO schedulers : row-sio-vr-fifo
- Tcp congestion methods : westwood-htcp-bic
- Raised charging currents
- Sound engines : Scoobydoo & Wolfson
- Updated to latest XXUGMJ9 ramdisk
- Auto-root (updated to latest su and supersu with daemon autorun)
- Auto install of Stweaks 2.0 (Googy-Max edition)