|July 4|RAPH| .¸¸.·´¯`·.¸¸.-|Energy| 21916|29022 - Sense 2019 / 2.1 / Titanium
- Thread starter NRGZ28
- Start date
At this point, I think we are pretty much stuck without it for the time being.
:enter sad face of choice here:
On that note, has anyone attempted to tweet or PM him about this?
:enter sad face of choice here:
On that note, has anyone attempted to tweet or PM him about this?
I was wondering if anyone can provide the cab or link to the cab file for the transcriber? I would like to have it on my device as a means to input data. I did use it and found it kinda useful rather than fumbling with the keyboard (both hardware and software).
You mean, Energy.RAPHAEL.21916.Sense2.5.Jan.27 ?
I don't seem to recall a RAPH ROM for the 26th. Anyways, I'll have to upload it when I get back from work. Will PM you when it's done...
Last edited:
29007?
I am running the 1/6/11 version of the Energy ROM, and have had no issues with it. I want to check to see if putting Android on it is worth doing, but I being the ID10T issue i can be deleted the .rar file for it. Does anyone know where I can get a copy of it? Also the same Titanium 29007 would be appreciated as well, as I was able to use that one with no issues.(here's a hint, if you have 7 TB of hard drives, always keep backups.)
I am running the 1/6/11 version of the Energy ROM, and have had no issues with it. I want to check to see if putting Android on it is worth doing, but I being the ID10T issue i can be deleted the .rar file for it. Does anyone know where I can get a copy of it? Also the same Titanium 29007 would be appreciated as well, as I was able to use that one with no issues.(here's a hint, if you have 7 TB of hard drives, always keep backups.)
The main project thread is HERE
The updates to this project thread are HERE for FRX04 (post for the update to FRX05) and HERE for GBX0A
(I think) The project thread you are referring to and that contains a link to the site is THIS thread. Keep in mind, this project thread is a tad outdated as the thread OP has not updated it in a few months; may not include the most up-to-date release from the AOSP source tree.
[EDIT]Also about the ROM request, same reply to that request as I did above; will have to wait till I get back home to upload and I will PM you a link to this unless not needed, thanks![/EDIT]
The updates to this project thread are HERE for FRX04 (post for the update to FRX05) and HERE for GBX0A
(I think) The project thread you are referring to and that contains a link to the site is THIS thread. Keep in mind, this project thread is a tad outdated as the thread OP has not updated it in a few months; may not include the most up-to-date release from the AOSP source tree.
[EDIT]Also about the ROM request, same reply to that request as I did above; will have to wait till I get back home to upload and I will PM you a link to this unless not needed, thanks![/EDIT]
Last edited:
29007
Thank you, I already have the Android ready to go(I did it for a friend's phone, and was considering it for mine, but I am not 100% sure I want to keep it.)
Thank you, I already have the Android ready to go(I did it for a friend's phone, and was considering it for mine, but I am not 100% sure I want to keep it.)
Trying latest Energy.RAPHAEL.28244.Sense2.5.Cookie.2.0.Mar.01.7z, excellent speed and trouble free so far..
Thanks NRGZ28
Thanks NRGZ28
My work around is to click the Home button to get the phone canvas to not be showing and then change the volume. BTW the volume seems to be able to change through my BT earpiece when I am using it. It appears to be something with the phone canvas.
The weird thing is, I am able to change the in-call volume. Ofc, I am using the ROM in my sig and no idea if either of you have applied anything additional to disable the in-call volume but I am glad to see there is a work-around...
I have Energy.RAPHAEL.21916.Sense2.5.Cookie.2.0.Feb.19 installed and am downloading Energy.RAPHAEL.28244.Sense2.5.Cookie.2.0.Mar.01 to try. I will check in-call volume before I install my other stuff.
-------------------------------------------------
In-call volume is working. It is not very pretty looking, but it works.
I did notice before flashing the new ROM I got a .net error during a call. Maybe I had something messed up in setting up phone after previous flash.
-------------------------------------------------
In-call volume is working. It is not very pretty looking, but it works.
I did notice before flashing the new ROM I got a .net error during a call. Maybe I had something messed up in setting up phone after previous flash.
Last edited:
I can confirm problems with in-call volume control. I had downloaded Energy.RAPHAEL.21916.Sense2.5.Cookie.2.0.DinikGlass.Feb.19 and had problems with volume control. Could not get the page to show in call and sometimes after adjusting system/ring volume the up and down keys on keyboard and d-pad would adjust volume. I am currently running Energy.RAPHAEL.21916.Sense2.5.Cookie.2.0.sencity.Mar.01 and continue to have in-call screen volume issues but, the workaround is great. So far I haven't had the up and down keys suddenly become volume control buttons.
I did have another question. The Feb 19 Energy ROM had been the first custom ROM that I have put on my Fuze. I played around with it and the settings and decided to use the Mar 01 sencity ROM. I downgraded back to my original stock ROM and radio, left HardSPL. Suddenly, my SIM card was not detected. I upgraded to the Mar 01 sencity ROM and SIM was detected again. I'm enjoying the ROM and shouldn't need to go back to stock but, does anyone know why the SIM was not detected?
I did have another question. The Feb 19 Energy ROM had been the first custom ROM that I have put on my Fuze. I played around with it and the settings and decided to use the Mar 01 sencity ROM. I downgraded back to my original stock ROM and radio, left HardSPL. Suddenly, my SIM card was not detected. I upgraded to the Mar 01 sencity ROM and SIM was detected again. I'm enjoying the ROM and shouldn't need to go back to stock but, does anyone know why the SIM was not detected?
Hello everyone. I was never really active in the forum but i have to say i thank everyone who helped me solve my problems. I just got an Atrix and will be using that from now on. Id like to thank NRGZ for making some badass roms that made my Fuze bearable for a while longer but i must move on.Thanks again everyone and especially NRGZ. Go get yourself some Beer on the house.
Confirmation number: 40E36240GC596551D
Confirmation number: 40E36240GC596551D
in call volume problems are present in Energy.RAPHAEL.21916.Sense2.5.Mar.02.7z version too. also another small problem is that bubblebreaker is broken p) and has been for some time now. it is easy to repair it by installing the game via cab, but i thought i should point it out. if anyone needs the cab (it is quite difficult to find for the raphael ) just let me know.
p) and has been for some time now. it is easy to repair it by installing the game via cab, but i thought i should point it out. if anyone needs the cab (it is quite difficult to find for the raphael ) just let me know.
Glad I no longer use that version...
Using the one in my sig, I experience none of the situations mentioned prior to my post
Using the one in my sig, I experience none of the situations mentioned prior to my post
WAY OT
I know this is way off topic and I hope it doesn't piss anyone off...but does anyone know if a TMobile HD2 will work on the AT&T network?
They're on the same frequency, right? I'm guessing i'd have to hspl and flash...but also don't want to end up with a brick.
thanks
I know this is way off topic and I hope it doesn't piss anyone off...but does anyone know if a TMobile HD2 will work on the AT&T network?
They're on the same frequency, right? I'm guessing i'd have to hspl and flash...but also don't want to end up with a brick.
thanks
Similar threads
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
16Welcome to the "EnergyROM" thread !
This development thread is for my "Energy" custom firmware series for the HTC Touch Pro (Raphael) device.
The current build numbers and date can be seen in the title of this thread. I usually update the ROMs about twice a week, as new builds come down the pipe or as new software/updates are available.
I build my ROMs with four main goals.
- Eye candy ( I want my ROM to look great and for it to all flow together nicely)
- Speed !!!
- Smoothness, consistency and good aesthetics
- Stability through private beta testing before public release
I pre-configure a lot of things in my ROM, because when I flash it on my phone, I want it ready to go. So, expect the backlight to be set at the maximum brightness, the ringtone, sms/email and other notifications to already be set. Doing it this way, makes for a nice ROM that's ready out of the box.
I recommend learning to backup your settings with either Sashimi or UC (User Customization). Backing up with SPB Backup or similar products, is NOT recommended, as they tend to backup the previous release's registry/file bugs as well!
Looking at the download folder you will find two core versions of my ROM.
- The 21916 Build which is the most reliable, fast and bug free release. It has the Start menu button at the top left corner just like a stock ROM. I recommend you start with this first!
- The 29022 Build that's the latest in the 6.5.X series with the Start menu button at the bottom left corner and big softkeys. These builds reflect the latest cutting edge technology from Microsoft. These are also much more finger friendly throughout.
You can stay up to date on the status of my ROM development by "following" me on Twitter.
It's definitely the fastest way to get in touch with me and please don't be afraid to tweet me if you see major issues with the ROMs.
I generally do not answer "support" questions on Twitter, as it's really not the proper medium for that. Service packs and quick fixes will always be released as links in my tweets and that's definitely the fastest way to get a fix for a ROM.
To follow me on twitter, click here!
If you own an European\Asian Touch PRO, use the "Keyboard Selector" application under Utilities > Tweaks (after you flash the ROM) to select the "Pro" keyboard layout. The ROM comes with the american AT&T Fuze layout enabled by default.
4
This post features all the Cookie Hometab based ROMs I make.
The original ROM is the "energy" version and that's a good starting point. All the rest, are themes applied to that ROM.
They all come in two versions, Cookie 1.8.5 and Cookie 2.0 (the ROM filename will be labeled "Cookie" and "Cookie.2.0, plus the name of the theme)
You can see more screenshots of these ROMs a couple of posts down.
The two Cookie versions look pretty similar, but Cookie 2.0 has multiple sliding homescreens/freely moveable widgets (similar to Android) and
quite a few more features and speed, however it's still in 'beta'. Cookie 1.8.5 is considered the less complicated and stable build for now.
My own 'Energy' style
- This is the best ROM version and the way Sense should have been designed by HTC
- Offers the biggest customization ability out of all versions. You can add/remove bars or items on the homescreen, arrange items any way you like, plus lots of extra features
- Three built in lockscreens. "HD Mini" style, Manila style or Windows style
- 3 pages of quicklinks with a configurable amount of shortcuts displayed
- 3 Homescreen layouts to choose from, as seen in the above screenshots, all completely customizable !
- Link to the original thread for this mod is here > Click <
- This ROM series is skinned with Dinik's great "Anastasia" theme applied on everything.
- Everything has been skinned, including Sense, the start menu items, the soft keyboard, parts of the dialer... etc
- This ROM is themed with the .sencity theme released by _LeCiel_ who is a very talented artist ! Please support his work if possible.
- .sencity is not %100 complete yet, but _LeCiel_ is working hard on finishing his work to completely skin the entire ROM.
- Link to the original thread for this mod is here > Click <
- This ROM series is skinned with DJC's "Touch of Glass" theme throughout Sense and the Start Menu
- More will be skinned as DJC continues his work on the theme in the future...
- Link to the original thread for this mod is here > Click <
- This ROM has the white GTX theme applied
- Android styled taskbar, matching dialer, matching start menu background and Action screen background
- GTX is a total reskin of the operating system, so expect a very different (white) experience
- Link to the original thread for this mod is here > Click <
4
List of installed applications
Games
- Bubble Breaker
- Solitaire
- Teeter
- Digital Compass
- QuickGPS
- Google Maps
- HTC GPSTool
- ChartCross GPS Test
- Opera 9.7
- Jbed Java
- RSS Hub
- Remote Desktop
- A couple of widgets for ROM Updates
- MSN Messenger and Windows Live
- Barnes Noble eReader
- Palringo
- Windows Live
- Messenger
- Bing
- Send and Receive All
- Data Controller
- Audio Booster
- FM Radio
- MP3 Trimmer
- Voice Recorder
- YouTube
- TCPMP
- InCall Recording
- Full suite of Office Mobile 2010
- BsB Tweaks
- Flashlight
- Lock Device
- Microsoft MyPhone
- Registry Editor
- PIM Backup
- FDC TaskManager
- Wifi Router
- XDA UC
- My own Settings Exporter tool
- Shake and Save (screenshot app)
- Wifi Monster
- Wifi Router (internet sharing app)
- tBattery
- Backlight control app
- Total Commander
- Rotate Screen (by clicking icon or by pushing down Send key)
- Windows Marketplace
ROM features at a glance:
- Very fast startup time. You won't find any startup wizards in this ROM. You'll be up and running in a couple minutes after flashing the ROM and ready to go. No need to spend time to set everything up.
- XDA_UC is built in. It will import your custom XML and REG files from your storage card after first boot.
- My own Settings Exporter application is found in the Tools folder. Use it to export all your settings after you customize the device. When a new ROM comes down the line, use it to import everything and save time.
- Everything is setup to use the phone right after flashing. Sounds, notifications, all options, etc
- The HTC Messaging client is removed, leaving the windows built SMS client for much faster texting, but still able to use a nicely skinned Sense text messaging app with "iphone style" messaging bubbles.
3
'Standard' ROMs that have no addons installed on the homescreen. Stock Sense 2.5 !
'Energy'
- This series retains the stock functionality of the Sense UI. The files have been compressed by "CFC" compression. making the UI lighter and faster
- This ROM still retains my theme and style, plus all the regular apps you find in my ROMs.
- There are no homescreen addon-ons in this ROM. The best speed and the most stock functionality.
MaxSense UI (android style homescreen)
- This is a complete rewrite of the Sense homescreen, by maxycy.
- It features a 3 screen, Android style, homescreen with widgets! The widgets can be placed ANYWHERE on the three screens.
- 75 Quicklink accessible on all tabs
- You should really visit the original thread for this mod shown on the next line to see all the features!
- Link to the original thread for this mod is here > Click <.
- This is a minimal ROM version without Sense in it. It's used primarily for people that like to customize the default 6.5 homescreen (Titanium)
- You can use it to install alternate homescreen interfaces like SPB Mobile Shell, etc
- Very low memory footprint and good battery life, but very simple and lacks a lot of features that you would otherwise have available in Sense...
Click the following link for addons, XDA_UC help and various cabs specific to this ROM series
3Camera / G-Sensor Issue
In the Rhodium, I found that HTCSensorSDK.dll was missing in both the December 11th and December 13th ROMs.
I found this by running depends.exe on Camera.exe.
I saw that HTCSensorSDK.dll was a dependency.
Since there were also G-Sensor issue, it seemed like a likely cause.
I uploaded my December 5th version of that file. A user applied it.
The Camera started working.
That particular file might not be compatible with the Raphael, so I recommend someone look at the last ROM where the camera worked. backup HTCSensorSDK.dll from the windows folder.
Flash the latest ROM. Then copy the backed up file to the windows folder.
If it works, then zip it up and upload it.
Hope this helps. If it does, please remember the Thanks button.
