[KERNEL][GPL][3.4.91+][N9005][SM4.10]Blaze Kernel -5

Search This thread

GuneetAtwal

Senior Member
Oct 6, 2012
2,421
5,327
27
Mohali
OnePlus 7T
zQjLXya.jpg


Code:
#include 
/*
 * I am not responsible for bricked devices, dead SD cards, thermonuclear
 * war, or the current economic crisis caused by you following these
 * directions. YOU are choosing to make these modificiations, and
 * if you point your finger at me for messing up your device, I will
 * laugh at you.
 */

Users mostly search for Download Link so made a simple one
Key Features
  • SELinux Permissive, with init.d support
  • init.d support + other ramdisk tweaks
  • -O3 , Cortex A15 , Graphite , neon , vfpv4 Optimizations
  • Compiled from Latest SaberMOD GCC 4.10 Toolchain which is latest Toolchain with best optimizations
  • Suuport for intelliplug 2.6 hotplug driver @faux123
  • More GPU Governors ( simple , performance , ondemand , powersave , userspace , msm_adreno_tz )
  • Faux Sound Support
  • USB Fastcharge support
    [*]OC upto 2.8Ghz (max safe limit)
  • Support undervolt/overvolting via sysfs interface/apps interface @myfluxi
  • Adaptive Voltage Scaling Support ;)
  • More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 , Lionheart )
  • More I/O Schdedulers ( SIO , Deadline , CFQ , ROW , BFQ(v6) , FIOPS , No-op , V(R) , ZEN )
  • added new power management mode "PowerSuspend" (Hello Battery)
  • add official f2fs kernel support + f2s optimization
  • exFAT AIO Optimization
  • added LZ4 compression (faster than LZO)
  • Frandom -Fast Kernel Number Generator driver added
  • Support for CPU BOOST code.
    [*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG , exFAT ;)
  • Debugging is OFF by Default to save CPU cycles, and extend battery life.
  • UKSM for Page Merging
  • Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
  • Enabled 5 new TCP Congestion controls viz. ( Westwood, Veno,Vegas , BIC, Reno, HTCP )





Installation:
Place the zip in the SDCard
wipe Dalvik Cache
and Flash it in recovery

F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is only compatible with Touchwiz ROMs and i officially support Aliance , Omega , Echoe , XtrestoLite ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.

Credits:
-faux123
-xcxa23 for testing everything
-every other dev whose code i incorporated in my kernel

Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!



XDA:DevDB Information
Blaze Kernel for 8974 chips, Kernel for the Samsung Galaxy Note 3

Contributors
GuneetAtwal
Source Code: https://github.com/GuneetAtwal/kernel_n9005

Kernel Special Features: UC/OC , UV , Performance Patches

Version Information
Status: Beta

Created 2014-05-21
Last Updated 2016-07-22
 

xcxa23

Senior Member
Oct 10, 2010
688
247
yes.. finally official release~!! bro, check ur pm ya~! the one here izit the same as the one in the latest pm?
 

xcxa23

Senior Member
Oct 10, 2010
688
247
that was fast... lol.. downloading again and testing it soon
booted and wifi problem fix.. on and off speed is as usual, fast
 
Last edited:

Julian Jeremiah

Senior Member
Apr 30, 2014
192
114
Name of the kernel sounds ferocious and furious :good: :p out of the blue there're more choices for users now
 

Lodix

Senior Member
Oct 2, 2013
1,283
253
Smartass governor doesn't work properly, it keeps the cores to max frequency.
 

Lodix

Senior Member
Oct 2, 2013
1,283
253
Check F.A.Q. i already said the Best Settings are the default settings as the default settings are the one which are most compatible to one another and does not cause any issues to the device ;)
But... this is not the point, if you have in your ''key features'' something it should be correctly implemented no ? If not should be better remove it or try to fix it. Just my opinion.
 
  • Like
Reactions: CatAlex

GuneetAtwal

Senior Member
Oct 6, 2012
2,421
5,327
27
Mohali
OnePlus 7T
But... this is not the point, if you have in your ''key features'' something it should be correctly implemented no ? If not should be better remove it or try to fix it. Just my opinion.

Ahh i did'nt meant that i won't fix it all user reviews are welcome in my thread as i work this way only you report i fix ...!
But regarding best settings default are the best i guess i posted that at wrong time :silly:
 
  • Like
Reactions: cuezaireekaa

Top Liked Posts

  • There are no posts matching your filters.
  • 47
    zQjLXya.jpg


    Code:
    #include 
    /*
     * I am not responsible for bricked devices, dead SD cards, thermonuclear
     * war, or the current economic crisis caused by you following these
     * directions. YOU are choosing to make these modificiations, and
     * if you point your finger at me for messing up your device, I will
     * laugh at you.
     */

    Users mostly search for Download Link so made a simple one
    Key Features
    • SELinux Permissive, with init.d support
    • init.d support + other ramdisk tweaks
    • -O3 , Cortex A15 , Graphite , neon , vfpv4 Optimizations
    • Compiled from Latest SaberMOD GCC 4.10 Toolchain which is latest Toolchain with best optimizations
    • Suuport for intelliplug 2.6 hotplug driver @faux123
    • More GPU Governors ( simple , performance , ondemand , powersave , userspace , msm_adreno_tz )
    • Faux Sound Support
    • USB Fastcharge support
      [*]OC upto 2.8Ghz (max safe limit)
    • Support undervolt/overvolting via sysfs interface/apps interface @myfluxi
    • Adaptive Voltage Scaling Support ;)
    • More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 , Lionheart )
    • More I/O Schdedulers ( SIO , Deadline , CFQ , ROW , BFQ(v6) , FIOPS , No-op , V(R) , ZEN )
    • added new power management mode "PowerSuspend" (Hello Battery)
    • add official f2fs kernel support + f2s optimization
    • exFAT AIO Optimization
    • added LZ4 compression (faster than LZO)
    • Frandom -Fast Kernel Number Generator driver added
    • Support for CPU BOOST code.
      [*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG , exFAT ;)
    • Debugging is OFF by Default to save CPU cycles, and extend battery life.
    • UKSM for Page Merging
    • Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
    • Enabled 5 new TCP Congestion controls viz. ( Westwood, Veno,Vegas , BIC, Reno, HTCP )





    Installation:
    Place the zip in the SDCard
    wipe Dalvik Cache
    and Flash it in recovery

    F.A.Q. - Read this before complaining!
    1. This kernel works on Y or X rom?
    A: It is only compatible with Touchwiz ROMs and i officially support Aliance , Omega , Echoe , XtrestoLite ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
    2. OMG Battery Sucks...!
    A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
    3. How do I flash this?
    A: Reading the OP, theres a reason why I added instructions on it.
    4. Which App is the best for Controlling the Kernel?
    A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
    5. Getting Random reboots..! Any Help
    A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
    6. OP is arrogant, I'm gonna call the Internet Police?
    A: Deal with it.
    7. Which Settings are best for XYZ ROM and XYZ thing..!
    A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
    8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
    A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.

    Credits:
    -faux123
    -xcxa23 for testing everything
    -every other dev whose code i incorporated in my kernel

    Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
    I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
    Lets make a better community here on this Thread
    Cheers..!



    XDA:DevDB Information
    Blaze Kernel for 8974 chips, Kernel for the Samsung Galaxy Note 3

    Contributors
    GuneetAtwal
    Source Code: https://github.com/GuneetAtwal/kernel_n9005

    Kernel Special Features: UC/OC , UV , Performance Patches

    Version Information
    Status: Beta

    Created 2014-05-21
    Last Updated 2016-07-22
    8
    Reserved

    ..
    Controllers
    You can use Trickster MOD app to control all the functions of the kernel
    you can download it here http://bit.ly/1lcuFGO

    Some info on Governors and I/O Schedulers
    http://xdaforums.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
    8
    ver_2 is out..!

    KeyChangelog:
    • Added Simple GPU governor from faux123 kernel
    • f2fs AIO Optimization
    • Intelliplug update to 2.6
    • SIO I/O Scheduler is set to default (More stability)
    • Some code cleanup

    FullChangelog:
    https://dl-web.dropbox.com/get/Publ...ADEX7qPCvmByHNIhtmqs7SZt1R1Q4zyAe20rJSTv8vdEg

    Cheers..!
    5
    Thanks mate thought you've given up on this project lol :p

    But why still on Linux 3.4.91 instead of 3.4.92?

    Ahh i thought to give up this as i don't see anyone in my thread :( although this is one of the best kernel out there but still people ignoring but then i thought to build one :p

    P.S. 3.4.92 is not stable yet i wait for a stable release and i will update the kernel then ;)
    5
    Pushed ver_3 ...!

    KeyChangelog:
    • Source updated to latest upstream i.e. 3.4.90
    • Some more stability improvements
    • SlimBus Overlclocking to give best Sound Quality
    • Workque and Lowmemorykilller backports from Linux 3.7+ (better ram management)

    FullChangelog:
    http://www.mediafire.com/view/klav17yg0vfw48c/changelog.txt

    Cheers..!