ihave china mobile n7100 mtk6577 dual sim model e1901_v77_jdt1_9p017 rom jb 4.1.1
how to root
What is the correct way to work root this case
how to root
What is the correct way to work root this case
Attachments
Last edited:
To hosamomr:
Hi, I'm a spanish user of one e1901_v77_jdt1_9p017 mobile (with JB 4.1.1). I have tried to root it using up to four methods (including Root_with_Restore_by_Bin4ry_v18), but no success. Please, could you detail the process to root this phone?. Is absolutely neccessary to flash a new rom to do this?. I would appreciate your help very much.
ok
thats my detail how to root
u need to make driver corect on pc
this link for how
here:...
this link for new recovery & su
here: ...
Which version is yours: QHD or FWVGA??
If you have the fwvga, you can follow the steps I wrote here:
I followed the procedure in the post:
...
to backup my ROM.
I then flashed the boot and recovery from post:
...
(cwm_recovery.img and cwm_boot.img) with the SP Flash Tool.
It was the first time I flashed a ROM and it took me a while to realize that I would need to map my scatter file with the two images and then click download to flash the phone... I eventually made it
The problem was that, once in the CWM, the volume buttons didn't work.... But the menu button worked as volume -. So I managed to install the cwm-supersu from the SD Card. As the volume keys still didn't work in Android, I flashed back my backed up boot and recovery images and eventually the phone was rooted and the volume keys worked.
Thanks a lot. Sorry, I'm a newbie in these matters
Then, all I have to do is:
- Install the Correct drivers for flashing into PC.
- Install Flashing tool into PC
- Install CMW into the phone by flashing tool. (absolutely neccessary?)
- Root the phone (Root file by CWM)
is OK and in this order?
Which Scatter file have you used? ( have to search the scatter file into the phone?)
Thanks again for your support
---------- Post added at 09:23 AM ---------- Previous post was at 09:05 AM ----------
Unzip the attached file Cwm Recovery S7100 by Angelobiz.rar (thanks to Angelobiz)
and put it into folder Flash_tool And then chose from Flash_tool >scatter-loading from the folder y put show the image & then finished the steps
when finished y have a new recovery
after that you can flash super user fro your sd card (put the- MT6577 blk0p3 Root by CWM-SuperSU 0.99 angelobiz.zip-into sd)
Hi, I did root this phone:
china clone
NOTE 2 CLONE phone model :e1901_v77_jdt1_9p017_fwvga
Now I have a white screen and the phone does not crank, I do not know how to restore to factory
I would say that you have the same problem as I have: you flashed the wrong boot/recovery...
The only way out is to get the stock (original) rom... I have been looking for it for more than 1 month
Let me know if you find it!
Could you please post the link to this rom ( the e1901_v77_jdt1_9p017 (QHD) )?My ROM is FWVGA.
The links you provided are for a different ROM: e1901_v77_jbla668_9p017_fwvga
I tried to flash this but didn't work for me... white screen.
My ROM model is the following: e1901_v77_jdt1_9p017_fwvga
I even tried the e1901_v77_jdt1_9p017 (QHD) from a Russian forum and didn't work either.
Any help would be much appreciated,
Could you please post the link to this rom ( the e1901_v77_jdt1_9p017 (QHD) )?
I would like to try and modify the video drivers but I can not find it.
I have the same phone ( the e1901_v77_jdt1_9p017_fwvga) with screen 5.3 854x480
and I lost my proxy / light sensor after flashing custom rom.
I will post the results after testing is satisfactory.
Thanks,
Try on needrom site the following phone:
STAR S7180 - ROM 3 WVGA
Use SP_MDT and select different sensors and camera untill you get your combination
Probably the correct driver will be LQ053HNYP32B or LQ053HNYP32A
If you need a rooted rom let me know, I have a mix but still no ALS_PS and light sensor
Also home back keys do not work but bottom of screen does the task (like a tablet)
However I have a perfect GPS and 3G memory (phone was 512Mb)
Good luck
To hosamomr:
Hi, I'm a spanish user of one e1901_v77_jdt1_9p017 mobile (with JB 4.1.1). I have tried to root it using up to four methods (including Root_with_Restore_by_Bin4ry_v18), but no success. Please, could you detail the process to root this phone?. Is absolutely neccessary to flash a new rom to do this?. I would appreciate your help very much.
ok
thats my detail how to root
u need to make driver corect on pc
this link for how
here:...
this link for new recovery & su
here: ...
Which version is yours: QHD or FWVGA??
If you have the fwvga, you can follow the steps I wrote here:
I followed the procedure in the post:
...
to backup my ROM.
I then flashed the boot and recovery from post:
...
(cwm_recovery.img and cwm_boot.img) with the SP Flash Tool.
It was the first time I flashed a ROM and it took me a while to realize that I would need to map my scatter file with the two images and then click download to flash the phone... I eventually made it
The problem was that, once in the CWM, the volume buttons didn't work.... But the menu button worked as volume -. So I managed to install the cwm-supersu from the SD Card. As the volume keys still didn't work in Android, I flashed back my backed up boot and recovery images and eventually the phone was rooted and the volume keys worked.
Thanks a lot. Sorry, I'm a newbie in these matters
Then, all I have to do is:
- Install the Correct drivers for flashing into PC.
- Install Flashing tool into PC
- Install CMW into the phone by flashing tool. (absolutely neccessary?)
- Root the phone (Root file by CWM)
is OK and in this order?
Which Scatter file have you used? ( have to search the scatter file into the phone?)
Thanks again for your support
---------- Post added at 09:23 AM ---------- Previous post was at 09:05 AM ----------
Unzip the attached file Cwm Recovery S7100 by Angelobiz.rar (thanks to Angelobiz)
and put it into folder Flash_tool And then chose from Flash_tool >scatter-loading from the folder y put show the image & then finished the steps
when finished y have a new recovery
after that you can flash super user fro your sd card (put the- MT6577 blk0p3 Root by CWM-SuperSU 0.99 angelobiz.zip-into sd)