[KERNEL] [4.2.x] [GSM/LTE/CDMA] ⇒☆007☆ v3.7.1

Search This thread

johno168

Senior Member
Dec 16, 2010
957
120
28
Auckland, NZ
you ask for advice, then don't listen:rolleyes:
this isn't imoseyon's kernel...just because something doesn't work with his,...

I'm sorry, i wasn't trying to be annoying or arrogant in any way, i was simply just hoping to get an answer as to why you use those UV settings and if they would decrease performance. But i'll try with your UV settings you provided. Thanks again.
 
  • Like
Reactions: ogdobber

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
Hi guys...this kernels is using CFQ as default scheduler...but most use deadline..

So heres my question...wich one is the best for this kernel?

not quite sure what you are asking? you are saying that most (other) kernels use deadline? and this kernel uses cfq...
so my answer is (with the exception of voltage) this kernel boots to the defaults I feel are best;)
 

despard

Senior Member
Feb 28, 2011
195
10
your the first to say...quite a few downloads.
can you expand on your setup -voltages, clock, what apps it freezes on etc.
Undervolted using your recommend voltage.
Screen on: interactive freq min: 350 max: 1200
Screen off: hotplug freq max: 350

Freezes happened when I turn on the screen maybe it's a wake up bug??
 

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
Undervolted using your recommend voltage.
Screen on: interactive freq min: 350 max: 1200
Screen off: hotplug freq max: 350

Freezes happened when I turn on the screen maybe it's a wake up bug??


get rid of your profiles and only use interactive
when the screen goes off, the kernel will take care of things;)
 

odin13

Senior Member
Dec 11, 2007
1,146
359
near amsterdam
Undervolted using your recommend voltage.
Screen on: interactive freq min: 350 max: 1200
Screen off: hotplug freq max: 350

Freezes happened when I turn on the screen maybe it's a wake up bug??

your screen off max frequency is too low when using hotplug governor...
i had the same issue a while ago on imoseyon's leankernel.
set your screen off max frequency to 700mhz...that should solve your problem...
 

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
-ics version-v3.1.x.x
-two versions that thae(pure) & khlang(crazed)
-fsync disabled
-some debugging disabled
-compatible for gsm (maguro) and cdma (toro)
-GPU set to 307MHz
-all versions are preset undervolted
-interactive governor (default) is recommended
-voltages are preset, they can be lowered another 75mV (no more is recomended)

-extra features
-khlang (only)
-color and v1 control (KalimochoAz cm voodoo)
-vibration control (morfic)
-volume boost (ezekeel)
-high performance sound (ezekeel)
-fast charge (Chad0989)
-lower screen on voltages (ch33kybutt)
-overclocked to 1.35 boots to 1.2
-GPU set to 384MHz
-fsync control (ezekeel)



___________________________
4.0.4 kernels
that thae
1.2GHz◊GPU 307MHz
☆Jame Bond☆ v3.1
☆Jame Bond☆ v3.1i
note* v3.1i is a variant of v3.1 with googles "signal drop" fix. However, I have never experienced it, and don't recall any reports of it from users of JB kernels. But nonetheless I am posting it...use only if your (gsm) phone drops signal in a location that normally wouldn't
It will use more battery in standby...


khlang
1.2/3.5GHz◊GPU 384MHz
☆Jame Bond☆ v3.1.7

1.2/3.5GHz◊GPU 307MHz
☆Jame Bond☆ v3.1.7
note* better battery due to lower gpu clock

this is what i run (recommended until the next release)
☆Jame Bond☆ v3.1.9.9j.zip
________________________________________________________________________________________________
 
Last edited:

despard

Senior Member
Feb 28, 2011
195
10
better to not mess with it. run interactive and delete profiles
hmmm, if I get time I will run a comparison between the 2 (just to prove you wrong and me right;):D)



well, I am running 4.0.3 ND currently and I have no lags in GTA... I suppose it is worth a "test"
after you try a 384, please let me know how it works. there is possibly (maybe likely) something else that is causing it.
what governor? for example
I'm using intractive governor. The lag doesn't always appear, sometimes I restart the game it becomes butter smooth again:( Maybe that's because I have too much background apps running at the same time???
 

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
new test kernel 2.2

posted on the op is a new test version kernel "fs"
if everything goes good, I will post other versions. I am hoping this will replace 2.1.3...I am not terribly happy with that one. 2.1 kicks ass and the lower clock version of this (2.1.3) i don't think is as good (but only 1.4:()
anyways, 2.2 is not "up2u" in other words, it is a "flash and go kernel"
voltages are pre-set at my recommended values
*do not use profiles...flash it and go....

download from op or get it on the goo-inside.me app (devs/ogdobber/kernels/403)
 
Last edited:

odin13

Senior Member
Dec 11, 2007
1,146
359
near amsterdam
posted on the op is a new test version kernel "fs"
if everything goes good, I will post other versions. I am hoping this will replace 2.1.3...I am not terribly happy with that one. 2.1 kicks ass and the lower clock version of this (2.1.3) i don't think is as good (but only 1.4:()
anyways, 2.2 is not "up2u" in other words, it is a "flash and go kernel"
voltages are pre-set at my recommended values
*do not use profiles...flash it and go....

download from op or get it on the goo-inside.me app (devs/ogdobber/kernels/403)

Is color offset control available in this kernel? 2.1.3 is running very smooth on cm9 i only miss the color control...

Thnx in advance Ogdobber!

*no problems here with governors...
I use cpu tuner:

Screen on = ondemand; treshold 75
Screen off = conservative; up treshold 98 + down treshold 95

Works like a charm...very satisfied about batterylife


Verstuurd van mijn Galaxy Nexus met Tapatalk
 

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
Is color offset control available in this kernel? 2.1.3 is running very smooth on cm9 i only miss the color control...

Thnx in advance Ogdobber!

*no problems here with governors...
I use cpu tuner:

Screen on = ondemand; treshold 75
Screen off = conservative; up treshold 98 + down treshold 95

Works like a charm...very satisfied about batterylife


Verstuurd van mijn Galaxy Nexus met Tapatalk

no color control versions yet...I wanted to sort some more important things first
btw, I am very satisfied with 2.2
 

ogdobber

Inactive Recognized Developer
Nov 4, 2008
3,256
1,827
new kernels

I am very happy with v2.2. idle is very good (see below) full sync on:D
Screenshot_2012-03-02-07-41-56-sm.png


also posted is fs kernel for 4.0.2 please if you have downloaded 2.1.3 get this one!

one more thing for the brave...have a new one (fsnd) (test) (4.0.3 only now) I am seeking even better battery. so if you try report back. thanks

to date my 2 favorite kernels 2.1 and 2.2 (i think 2.2 might take it after a few days of testing)
 

Top Liked Posts