How to enable usb debugging mode when phone is bricked

Search This thread
By:
Advanced…
S

Shahid Niazi

Member
Jun 10, 2014
9
2
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
 
Sort by date Sort by votes
Droidriven

Droidriven

Senior Member
Jan 27, 2014
16,235
13
5,625
NC
Verizon Samsung Galaxy S III
HTC Thunderbolt
Praxxer1 said:
I just read through it, it was ALOT to take in. Pretty incredible, high level stuff - above my head. From what a garnered, they were unable to unbrick. But someone had suggested using a Qualcomm utility of some sort to flash the appropriate ADB driver on their device, but I wasn't able to comprehend exactly what they were suggesting. Any ideas about Qualcomm HS-USB QDLoader 9008 driver or where I can learn more about it?
Click to expand...
Click to collapse
They were probably talking about using the QPST or QFIL programs.

I'm not very familiar with the process but I know it is used on many different Qualcomm devices. The methods should work for you, the problem is finding the correct files to use, I don't know which files you need or how to go about finding it.

I suggest you research how to use QPST or QFIL and what kinds of files they require, get familiar with how it works, then try finding those types of files for your device based on your model number and the firmware you were running.

Have you seen this?

https://www.droidsavvy.com/unbrick-qualcomm-mobiles/

Sent from my LGL84VL using Tapatalk
 
Last edited:
Upvote 0 Downvote
Z

Zinoinfull45

New member
Jan 6, 2019
1
0
Hi, i'm using HTC ONE A9 but i can't access my usb debugging because my phone is stuck boot logo and it is reboot repeatedlly and in my download mode bootloader is locked and the S on ........ what can i do?
 
Upvote 0 Downvote
R

rodolfRD

New member
Oct 9, 2019
1
0
¡Hola amigos!

Mí problema es similar les explico, samsung envío una nueva actualización a mi teléfono por lo cual actualize de inmediato, en el transcurso se agota la batería y el teléfono queda a medias. Cuando lo enciendo se queda en el logotipo de SAMSUNG, a mí pareser para solucionar el problema debía flashear el teléfono por lo cual lo hice. Ya flasheado me manda a (RECOVERY) con este error:

#fail to open recovery_cause(No such file or directory)#

#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU

Intenté flasheo de custom (RECOVERY) pero necesito depuracion USB, en todas las posibles soluciones se necesita depuración USB.

¿CÓMO ACTIVO LA DEPURACIÓN DESDE FUERA? ?

Mi teléfono es el GALAXY S7 EDGE (SM-G935F)
 
Upvote 0 Downvote
CaptainX40

CaptainX40

Member
Jun 16, 2021
10
0
ASUS ROG Phone 3
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
MY rog phone 3 also has the same problem, it doesn't show any USB and hardbricked......what should i do now?
 
Upvote 0 Downvote
Hitch0521

Hitch0521

Member
Nov 26, 2021
5
0
I have no answer to that,and obviously the so called experts on here don't either. But I'm working on the same issue and once I figure it out will let you know.
 
Upvote 0 Downvote
ZG089▼

ZG089▼

Senior Member
Feb 5, 2021
4,875
1,942
16
𝚃𝚑𝚎 𝚠𝚘𝚛𝚕𝚍 𝚘𝚏 𝚙𝚑𝚘𝚗𝚎𝚜(Egypt-Cairo)
Samsung Galaxy Grand Prime
Project Treble
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Dude
Are u still here
U can go to meta mode by pressing vol down and flash your stock rom 🙂
Just keep pressing until u connect it to pc and quickly click "flash"
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

KidCarter93
  • Sticky
General **What phone should I buy next?** -- Not sure what device to buy? Ask here!
Replies
14K
Views
1M
NOSS8
NOSS8
noellenchris
Question How to repair corrupted sd card?
Replies
209
Views
838K
L
London 2020
workdowg
[SOLVED] - Manually enable adb debugging from recovery
Replies
61
Views
254K
N
Noristay
S
How to put cheat codes in Gta sanandreas for android??
Replies
131
Views
676K
Oswald Boelcke
Oswald Boelcke
C
Question [Q] How to stream Android audio output to UPnp/Airplay/DLNA ... whatever
Replies
166
Views
486K
S
Sunport

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 2
    sonyu
    sonyu
    Shahid Niazi said:
    Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
    Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
    I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
    I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
    I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
    I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
    Click to expand...
    Click to collapse

    So, you flashed a ROM via cwm.
    A few lines later you mention that you can't install cwm... is there something I miss????
    Whatever;
    Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
    Have you unlocked your bootloader?

    Have you tried following these steps?

    That's pretty much everything I can think of.
    I hope it's just a software brick... :fingers-crossed:
    View
    2
    S
    Shahid Niazi
    plz can anyone tell how to enable usb debugging mode when phone is bricked.....
    View
    2
    M
    monleyson
    my phone too .. I forgot to switch my USB debugging... :(
    View
    1
    Kobro
    Kobro
    if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
    View
    1
    irfanjunaid
    irfanjunaid
    Shahid Niazi said:
    Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
    Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
    I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
    I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
    I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
    I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
    Click to expand...
    Click to collapse

    Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
    View

New posts