[ROM][SM-G350E][PORT][STABLE]CyanogenMod 11 for GALAXY Star 2PLUS/Advance

Hicham03 · May 3, 2016

Welcome the all 1st booted custom ROM ever on higgs2g thread !

After porting @doesntexits CM11 using this guide (thanks @Nasheich Xfiles !), I successfully got CM11 booted on my unsupiported device, ~~but despite that, I needed to fix some bugs. This is why I invite you to test my beta builds and help me for fixing ROM bugs and making it stable.~~
AND PLEASE NOTE THAT THIS ROM WILL NOT WORK WITH SM-G350 OR S ADVANCE.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android), which is designed to increase performance and reliability over stock Android for your device.

THE ROM IS SUITABLE FOR DAILY USE !

How to install (beta builds):
*Flash CWM recovery on your device (here you can find how to do)
*OR flash this new built TWRP 3 by @ahtesham01 (here)
*Wipe data, system ,cache...
*Install the ROM and enjoy !

HOW TO INSTALL STABLE BUILD
+ Install one of the beta builds
+ Make a backup of anything you want (ie. Kernel) through TWRP
+ Reboot the phone
+ You'll find in /sdcard/TWRP/BACKUPS a folder with random letters and numbers
+ Extract the stable build zip to that folder
+ Reboot to recovery
+ Go to restore > CM11-NOBUGS folder > Select all > Confirm restore
+ Reboot and enjoy ur stable ROM!

Known issues:
* Advanced reboot (recovery, download) doesn't work

I'LL NEVER REPLY TO THOSE WHO:
+Ask me for CM13 work state
+Modded the ROM
+Crying (yes, there are some people here who cry for nothing)
+Don't read the OP

Download links

STABLE 1: here (thanks @d0nny94)
BETA 3: here
BETA 2: here (thanks @doesntexits !)
BETA 1: here
CWM: here
TWRP: here
GAPPS: here (select ARM, 4.4, and a light zip, I recommend you nano package)

Code:

Changelog:
STABLE 1: Bluetooth and USB mass storage are now working !
BETA 3: Multitasking and return buttons are now detected !
BETA 2: Network, SIM, phone bugs fixed !
BETA 1: Initial release

TIPS
- Does CyanogenMod runs slowly on your phone and laggs? Don't worry! Just activate developer tools, go to "performances" in settings, go to "processor" and set strategy to "PERFORMANCE", and your phone runs smoothly

- Impatient for waiting CM13 ROM? There are a lot of Lollipop themes made for CM11 theme engine, so install one of them and apply it to your device !
- No root on the ROM? Just install SuperSU zip through recovery, then open the app, go to settings and enable "Install SuperSU backup script" to avoid lost root access on ROM updates!

SPECIAL THANKS TO:

@doesntexits (ROM ported from his CM11)
@Nasheich Xfiles (For ROM porting guide)
@Bby6 (for CWM recovery)
@ahtesham01 (TWRP)
@d0nny94 (For making ROM stable)
@Hicham03

PRESS THANKS BUTTON IF I HELPED YOU

XDA:DevDB Information
CyanogenMod 11 for higgs2g SM-G350E, ROM for the Samsung Galaxy Star

Contributors
Hicham03, doesntexits, d0nny94, firemasterandrik, Loay209, ahtesham01
Source Code: http://xdaforums.com/ace-4/development/rom-cyanogenmod-11-samsung-galaxy-t3290500

ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: CWM/TWRP recovery

Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-06-25
Current Beta Version: 3
Beta Release Date: 2016-05-15

Created 2016-05-03
Last Updated 2016-06-27

Hicham03 · May 3, 2016

Reserved

Hicham03 · May 3, 2016

Reserved

doesntexits · May 3, 2016

Some screenies would be nice

Loay209 · May 3, 2016

Good work thanks i will try it now

d0nny94 · May 3, 2016

1.Wi-fi WORKS
2.Mobile network not working
3.Sdcards are not detected
4.camera doesn't work
5.bluetooth doesn't work
6.Touch buttons are not working
7.Flashlight application is not working

doesntexits · May 3, 2016

@Hicham03
The RIL bug is easy, just replacing these blobs from your stock to CM11:

Code:

etc/nvitem_td.cfg
etc/nvitem_w.cfg
bin/rild
bin/modemd
bin/nvitemd
bin/phoneserver
bin/ext_data.sh
bin/ext_kill.sh
bin/ext_symlink.sh
bin/prepare_param.sh
lib/libril.so
lib/libreference-ril_sp.so
lib/librilutils.so
lib/libsecril-client.so
lib/libsecnativefeature.so

You've done with RIL

About camera bug, this can be done by replacing ramdisk. You can use my init binary instead, because stock init binary makes camera doesn't work

Loay209 · May 4, 2016

any fix for the light buttons ?? Hicham

Razihaider · May 5, 2016

Bugs are fixed

Hey Hicham I have fixed many bugs like camera,flashlight,storage and many bugs

I have did this from boot.img :good::good:

Download my boot.img and put this boot image into Hicham cm rom and delete Hichame's boot .

Note: Rename the boot[1] to boot

And I have happiness news for all samsung G350e user I have ported TWRP recovery And I will post that later Enjoy this CM rom thanks

Loay209 · May 5, 2016

Razihaider said:
Hey Hicham I have fixed many bugs like camera,flashlight,storage and many bugs

I have did this from boot.img :good::good:

Download my boot.img and put this boot image into Hicham cm rom and delete Hichame's boot .

And I have happiness news for all samsung G350e user I have ported TWRP recovery And I will post that later Enjoy this CM rom thanks

but how to do to that ??
i mean how to replace the boot.img ??

Razihaider · May 5, 2016

Loay209 said:
but how to do to that ??
i mean how to replace the boot.img ??

Extract the zip delete boot.img and then paste my boot.img and then zip the the rom and flash it

Loay209 · May 5, 2016

Razihaider said:
Extract the zip delete boot.img and then paste my boot.img and then zip the the rom and flash it

it say installation aborted
because it's not a flashable zip
and how to make a flashable zip ?? can you just give me the zip that you flashed

prostotaaaaaak · May 5, 2016

in the new kernel does not work storage and the camera

doesntexits · May 6, 2016

Loay209 said:
any fix for the light buttons ?? Hicham

I don't think the phone has light buttons, because it's a cheap phone

ahtesham01 · May 6, 2016

Hey Hicham I have fixed the network bug and also touch bug
I will give a patch zip for touch later...
For fixing network bug you need to replace these line in build.prop
persist.modem.t.enable=1
ro.modem.t.dev=/dev/cpt
ro.modem.t.tty=/dev/stty_td
ro.modem.t.eth=rmnet
ro.modem.t.snd=1
ro.modem.t.diag=/dev/slog_td
ro.modem.t.loop=/dev/spipe_td0
ro.modem.t.nv=/dev/spipe_td1
ro.modem.t.assert=/dev/spipe_td2
ro.modem.t.vbc=/dev/spipe_td6
ro.modem.t.id=0
ro.modem.t.fixnv_size=0x40000
ro.modem.t.runnv_size=0x60000
ro.modem.t.nvp=td

#ro.modem.wcn.enable=1
#ro.modem.wcn.dev=/dev/cpwcn
#ro.modem.wcn.tty=/deiv/stty_wcn
#ro.modem.wcn.diag=/dev/slog_wcn
#ro.modem.wcn.assert=/dev/spipe_wcn2
#ro.modem.wcn.id=1
#ro.modem.wcn.count=1

ro.modem.t.count=2

---------- Post added at 08:26 AM ---------- Previous post was at 08:19 AM ----------

Hey Hicham if you want to fix storage bug you need use a fresh cm11 framework-res.apk
I saw that you have decompile the framework and replace storage list.xml
Its not needed to replaced

---------- Post added at 08:29 AM ---------- Previous post was at 08:26 AM ----------

I have fixed all the bug in higgs2g except Bluetooth.
And I am sending this message using cm11 rom.

---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------

And most important thing use my friend Razi haider boot.img
Because the storage and camera, torch bug is rild bug and I am fixed the bug

---------- Post added at 08:42 AM ---------- Previous post was at 08:34 AM ----------

Loay209 said:
it say installation aborted
because it's not a flashable zip
and how to make a flashable zip ?? can you just give me the zip that you flashed

Hey bro
Just extract Hicham cm11 zip and find boot.img and delete
Then put Razi haider's boot.img and select all folder and file like system, Meta-info, boot.img...
And make a zip file then flash the zip file...
Its very simple man....

Razihaider · May 6, 2016

Loay209 said:
it say installation aborted
because it's not a flashable zip
and how to make a flashable zip ?? can you just give me the zip that you flashed

yes I can give you ! But please try my Boot.img it's very simple delete the HIchame boot and paste my boot and flash it 100% working I have tried myself

doesntexits · May 6, 2016

ahtesham01 said:
Hey Hicham if you want to fix storage bug you need use a fresh cm11 framework-res.apk
I saw that you have decompile the framework and replace storage list.xml
Its not needed to replaced

The stock CM11 framework overlay doesn't have correct storage path. Our current one is correct

ahtesham01 said:
I have fixed all the bug in higgs2g except Bluetooth.
And I am sending this message using cm11 rom

Could you tell me what's your firmware filename in your stock /system/vendor/firmware?

ahtesham01 · May 6, 2016

doesntexits said:
The stock CM11 framework overlay doesn't have correct storage path. Our current one is correct

Could you tell me what's your firmware filename in your stock /system/vendor/firmware?

My device is higgs2g sm-g350e
And use my guide to fix storage bug
First you need stock cm11 framework-res.apk
And boot.img which my friend Razi Haider already given you

Now replace these to file and storage bug is fix
Just think if storage bug will not be fix how can I install xda app

And I have already told you how to fix network bug just edit your build.prop

---------- Post added at 12:52 PM ---------- Previous post was at 12:45 PM ----------

doesntexits said:
The stock CM11 framework overlay doesn't have correct storage path. Our current one is correct

Could you tell me what's your firmware filename in your stock /system/vendor/firmware?

Its my vender/firmware name
BCM4343A0_001.001.034.0039.0100_ORC_Higgs-2G.hcd

just believe me and follow my tutorial and I am sure that your storage bug will be fix.

doesntexits · May 6, 2016

ahtesham01 said:
My device is higgs2g sm-g350e
And use my guide to fix storage bug
First you need stock cm11 framework-res.apk
And boot.img which my friend Razi Haider already given you

Now replace these to file and storage bug is fix
Just think if storage bug will not be fix how can I install xda app

And I have already told you how to fix network bug just edit your build.prop

First, I'm the developer of the ROM that @Hicham03 has ported for your higgs2g, so I definitely know about that
What I mean is my current framework overlay has correct storage path. If it's different, you can decompile the framework-res.apk and edit it to work with your device
Stock CM11's framework overlay just only have path to USB storage, not internal and external: https://github.com/CyanogenMod/andr...lob/cm-11.0/core/res/res/xml/storage_list.xml
Also, I don't own higgs2g, just helping people here

ahtesham01 said:
Its my vender/firmware name
BCM4343A0_001.001.034.0039.0100_ORC_Higgs-2G.hcd

OK, go to /system/etc/bluetooth/bt_vendor.conf, change this line

Code:

FwPatchFileName=BCM4343A0_001.001.034.0038.0090_ORC_Vivalto-3G_3MC.hcd

to this line

Code:

FwPatchFileName=BCM4343A0_001.001.034.0039.0100_ORC_Higgs-2G.hcd

Tell me if bluetooth is fixed or not

doesntexits · May 6, 2016

Build 2 is up, with some changes that makes some parts working. Need volunteer to test it, as I don't have the phone

If something's fixed, I'll change the buglist (luckily, @Hicham03 granted me as a contributor, so I can change the OP)

[ROM][SM-G350E][PORT][STABLE]CyanogenMod 11 for GALAXY Star 2PLUS/Advance

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

New member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts