I have available for download some nb0 files that work. Also, how to give your X50(mid) life again after you have bricked it (for example, you mistakenly flashed the WM5 A03 rom or any of the WM6 roms designed for the X50v).
Before you do anything, make sure you have at least a 256mb SD card and a card reader (you can get one at a place like Radio Shack or Office Depot). You also need to install winrar (found at WinRAR download and support. WinRAR is a powerful Windows tool to compress and decompress zip, rar and many other formats: Make Download). Your SD card must be formated with the FAT32 file system.
To format your SD Card with the FAT32 file system
Step 1: To do this insert the SD Card into the reader and go to "My Computer".
Step 1a: BACKUP YOUR FILES before you start
Step 2: Right-click the drive letter of the SD Card reader (differs for each computer, probably either E:\ or F:\ or G:\) and click "Format".
Step 2a: Don't worry about any of the options except for file system, choose "FAT 32"
Step 3: Click "Start" and wait until it is done
If you bricked your X50(mid) with a WM2003 SE rom trying to flash the A05 rom (latest rom for WM2003 SE)
Step 1: Get (OS) rom image at http://randomosity4.us/files/rfiles/...2k3_A05_EN.rar
Step 2: Extract files to any folder using Winrar
Step 3: Go to the folder where you extrated the files in the RAR archive
Step 4: Find the 2 files that have X50 in the filename (should be 1 (has a filename like DiMa_K_A05_X50_WM2k3_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 5: Take SD Card out of SD Card reader and put it in the axim
Step 6: Hold the power button and the wireless button at the same time, and quickly tap the soft reset button (little hole on back of axim near DELL logo and press it with something like a pencil or pen) 2 or 3 times
Step 6a: Watch screen for SD Card loader (should see the hard reset screen, but wait a few seconds until it shows up)
Step 7: choose the A05 rom image and follow any on-screen directions
Step 8: watch your axim come back to life and enjoy your axim
If you bricked your X50(mid) with a WM2003 SE rom trying to upgrade to WM5 (VIA USB)
Step 1: If the bootloader didn't flash, you're screwed. I can't help you. I have not included the bootloader for certain reasons.
Step 1a:If the bootloader flashed successfully, download the OS file at http://www.drivehq.com/web/steven855/X50_WM5_A01.rar.
Step 2: Extract files to any folder using Winrar
Step 3: Go to the folder where you extrated the files in the RAR archive
Step 4: Find the 2 files that have X50 in the filename (should be 1 (has a filename like WM50_K_A01_X50_WM5_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 5: Take SD Card out of SD Card reader and put it in the axim
Step 6: Hold the power button and the wireless button at the same time, and quickly tap the soft reset button (little hole on back of axim near DELL logo and press it with something like a pencil or pen) 2 or 3 times
Step 6a: Watch screen for SD Card loader (should see the hard reset screen, but wait a few seconds until it shows up)
Step 7: choose the A01 rom image and follow any on-screen directions
Step 8: watch your axim come back to life and enjoy your axim
If you bricked your X50(mid) with the WM5 A01 rom trying to update the rom to the WM5 A02 rom (or you bricked it trying to flash Maglite's WM5 A03 rom or any of his WM6 roms)
Step 1: A02 uses a different bootloader than A01, so that has to flash successfully before you can update to A02. I have included the bootloader just in case. If you don't need the bootloader, don't worry about it.
Step 1a:If the bootloader flashed successfully, download the OS file at http://www.drivehq.com/web/steven855/X50_WM5_A02.rar.
Step 2: Extract files to any folder using Winrar
Step 3: Go to the folder where you extrated the files in the RAR archive
Step 4: Find the 4 files that have X50 in the filename (should be 1 (has a filename like WM50_K_A02_X50_WM5_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 4a: Take the bootloader file and it's crc file (should be 1 (has a filename like WM50_B_A02_X50_WM5_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 5: Take SD Card out of SD Card reader and put it in the axim
Step 6: Hold the power button and the wireless button at the same time, and quickly tap the soft reset button (little hole on back of axim near DELL logo and press it with something like a pencil or pen) 2 or 3 times
Step 6a: Watch screen for SD Card loader (should see the hard reset screen, but wait a few seconds until it shows up)
Step 7: choose the file "WM50_B_A02_X50_WM5_ENG.nb0" and follow any on-screen directions
Step 7a: repeat steps 6 and 6a
Step 7b: choose the file "WM50_K_A02_X50_WM5_ENG.nb0" and follow any on-screen directions
Step 8: watch your axim come back to life and enjoy your axim
If you bricked your X50(mid) with a WM5 rom trying to downgrade to WM2003 SE
Step 1: Your procedure is similiar to the updating 2003 SE rom one
Step 1a:Get os and bootloader rom image at http://randomosity4.us/files/rfiles/...2k3_A05_EN.rar
Step 2: Extract files to any folder using Winrar
Step 3: Go to the folder where you extrated the files in the RAR archive
Step 4: Find the 4 files that have X50 in the filename (should be 1 (has a filename like DiMa_K_A05_X50_WM2k3_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 4a: Take the bootloader file and it's crc file (should be 1 (has a filename like DiMa_B_A05_X50_WM2k3_ENG) .nb0 file and (same naming conventions) 1 .crc file) and transfer them to the SD Card
Step 4b: Rename the bootloader file (on the SD card) from "DiMa_B_A05_X50_WM2k3_ENG.nb0" to "WM50_K_A05_X50_WM2k3_ENG.nb0"
Step 5: Take SD Card out of SD Card reader and put it in the axim
Step 6: Hold the power button and the wireless button at the same time, and quickly tap the soft reset button (little hole on back of axim near DELL logo and press it with something like a pencil or pen) 2 or 3 times
Step 6a: Watch screen for SD Card loader (should see the hard reset screen, but wait a few seconds until it shows up)
Step 7: choose the file "WM50_B_A05_X50_WM2k3_ENG.nb0" and follow any on-screen directions
Step 7a: repeat steps 6 and 6a
Step 7b: choose the file "DiMa_K_A05_X50_WM2k3_ENG.nb0" and follow any on-screen directions
Step 8: watch your axim come back to life and enjoy your axim
Any questions, just post or PM me. I plan on having X50(low) rom images available soon (WM5 images at first and WM2003 SE images if I can find some, if you want to experiment and use the X50(mid) WM2003SE images in the meantime,I don't reccommend it unless you're desperate. If anyone wants me to have the X51 rom tutorial, let me know.
Credits Steven855
Last edited: