[GB/JB] ***Feralab*** Discussion Thread - Break The Limits...

elmanolosemurio said:

is not for the gallery, the gallery no problem

http://imageshack.us/photo/my-images/545/screenshot1338874398639.png/

force close... :S

Click to expand...

Click to collapse

Ah, i see, ok try this :
1. Wipe setting app's cache (through setting --> application --> Manage Application --> All --> select Setting application and wipe it's cache and data if necessary.
2. Reboot into xrecovery, wipe cache, dalvik and fix permissions.
3. Reboot, wait for 3-5 minutes and reboot, lets see

Bares said:

Hi,
To set to default voltage (its set by kernel), you need to delete 07g file in below dir and reboot :
system/etc/init.d
To verify default voltage in your kernel,
check vdd_levels file in below directory :
sys/device/system/cpu/cpu0/cpufreq/

And try to compare above vdd_levels with
default voltage for Doom's kernel (see doom's thread).
Also you can edit above 07g script file, but i'm recomended to set higher value than Doom's kernel default voltage. U only need this if you want more freq for CPU or if you want to burn your CPU......Lol, sorry i'm just kidding

For facebook issue, there is a lot of solutions in this thread, try to find it.

FYI

Click to expand...

Click to collapse

Thanks.
I'm running dl kernel UB 1113mhz, are you saying that the kernel sets the volt, not the rom?
If so I need to look for another soulution, because kernel doesn't seem to cause a problem in other roms, been on a lot of them currently on donut for almost a full month (amazing right) with same kernel but without a single wlod.
Where can I look to fix my wlod?

" For future notice"
volt list in donut reads:
128-460 : 1000
576 : 1025
614 : 1050
652 : 1075
691 - 729 : 1100
768 : 1125
806 : 1150
844 : 1200
921 : 1250
998 : 1300
1036 - 1075 : 1325
1113 : 1350

One more thing tho, the dodol walpaper maker seems to be uncompadable with my phone? I can't install it, it's working in donut, anything I change myself?

adjin said:

Thanks.
I'm running dl kernel UB 1113mhz, are you saying that the kernel sets the volt, not the rom?
If so I need to look for another soulution, because kernel doesn't seem to cause a problem in other roms, been on a lot of them currently on donut for almost a full month (amazing right) with same kernel but without a single wlod.
Where can I look to fix my wlod?

One more thing tho, the dodol walpaper maker seems to be uncompadable with my phone? I can't install it, it's working in donut, anything I change myself?

Click to expand...

Click to collapse

Whats I'm trying to say is : Don't undervolt, have u tried to delete above 07g script file and reboot? That script for undervolt and battery saving, probably your device cant to handled it using this rom. And u r absolutely right, rom that was set volt/freq for cpu as long that settings are supporting by your kernel, that's y u need to verify vdd_level file (default voltage) above too. Sorry for my bad english
Also u can try to clockdown your CPU freq, ie : 1 GHz max.
And you can do this by edit below maxcpuon file in below dir :
system/xbin
And don't change it's permission's set !

PS : Donut also a good rom, but the performance,features and UI is medium ( this is my opinion only ).
And there is typo error in my previous post, should be : I'm not recommended to set higher value !!, sorry it's my bad, please ignore it

FYI

Hi Guys....
can any1 provide v20 greek fonts zip?
thx

I installed Feralab v20 LB in my X10i the last friday, and 3 times when I have took the phone for use it, it was in the PIN screen, so I assume it suffers for random reboots. I have seen in a tool called Z-Device Test than the CPU max is clocked at 1190Mhz. It hasn´t rebooted when I am using it, the three times has been in idle/sleep.

So, can the problem be related with the overclock? Before, I was using all stock SE 2.3.3, and never have experimented this problem

thank you Bares

But my issue is when i connected charger to the phone for charging battery is doesn't charge. for example: the battery statue show the battery level is 20% when i charge AC the battery is reduce to 19 than 18... even i left it alone for 15mn-20mn my battery statue is show 15 or or something like that when i checked on CPU spy it showed the phone run on 245 not deep sleep but if i disconnect the charger and late the phone sleep it will show the phone run in deep sleep ....

my English not good too..

Locked Bootloader
V20 fera + customize pack with 1113-245
ICS them
Undervolt

taylerdurden said:

I installed Feralab v20 LB in my X10i the last friday, and 3 times when I have took the phone for use it, it was in the PIN screen, so I assume it suffers for random reboots. I have seen in a tool called Z-Device Test than the CPU max is clocked at 1190Mhz. It hasn´t rebooted when I am using it, the three times has been in idle/sleep.

So, can the problem be related with the overclock? Before, I was using all stock SE 2.3.3, and never have experimented this problem

Click to expand...

Click to collapse

Try to not undervolt and reduce your cpu freq, see my previous posts, Lets see

---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------

Laosx10 said:

thank you Bares

But my issue is when i connected charger to the phone for charging battery is doesn't charge. for example: the battery statue show the battery level is 20% when i charge AC the battery is reduce to 19 than 18... even i left it alone for 15mn-20mn my battery statue is show 15 or or something like that when i checked on CPU spy it showed the phone run on 245 not deep sleep but if i disconnect the charger and late the phone sleep it will show the phone run in deep sleep ....

my English not good too..

Locked Bootloader
V20 fera + customize pack with 1113-245
ICS them
Undervolt

Click to expand...

Click to collapse

It seem hardware failure for me, btw try this :
Check your USB port condition, try to connect your phone to pc/laptop.
Backup everything, and reflash SE Stock 2.3.3 rom using SEUS, PC Companion or Flashtool. And check/evaluate above issue.
Sofar, no one report this kind of problem, that's why i 'm suggested you to reflash SE Stock rom for confirmation

FYI

Laosx10 said:

thank you Bares

But my issue is when i connected charger to the phone for charging battery is doesn't charge. for example: the battery statue show the battery level is 20% when i charge AC the battery is reduce to 19 than 18... even i left it alone for 15mn-20mn my battery statue is show 15 or or something like that when i checked on CPU spy it showed the phone run on 245 not deep sleep but if i disconnect the charger and late the phone sleep it will show the phone run in deep sleep ....

my English not good too..

Locked Bootloader
V20 fera + customize pack with 1113-245
ICS them
Undervolt

Click to expand...

Click to collapse

Bares said:

Try to not undervolt and reduce your cpu freq, see my previous posts, Lets see

---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------



It seem hardware failure for me, btw try this :
Check your USB port condition, try to connect your phone to pc/laptop.
Backup everything, and reflash SE Stock 2.3.3 rom using SEUS, PC Companion or Flashtool. And check/evaluate above issue.
Sofar, no one report this kind of problem, that's why i 'm suggested you to reflash SE Stock rom for confirmation

FYI

Click to expand...

Click to collapse

Thank You
i just flash JAF rom and it was still the same. i try to charge nearly 90% 0r 100% if possible then i will reflash stock rom

JAF rom uses gingerbread keyboard which doesnt have swype feature right? Is there a way to gett Xperia S keyboard from v20 on JAF so i can get my swype back? Thx

Sent from my Xperia X10 using XDA

GuilhermeXOT said:

JAF rom uses gingerbread keyboard which doesnt have swype feature right? Is there a way to gett Xperia S keyboard from v20 on JAF so i can get my swype back? Thx

Sent from my Xperia X10 using XDA

Click to expand...

Click to collapse

Download TouchPal, it has Swype function. And it's free.

Sent from my x10 using xda premium

GuilhermeXOT said:

JAF rom uses gingerbread keyboard which doesnt have swype feature right? Is there a way to gett Xperia S keyboard from v20 on JAF so i can get my swype back? Thx

Sent from my Xperia X10 using XDA

Click to expand...

Click to collapse

Try the sola keyboard that bares posted a few pages back.
Oh and @bares, wud the sola keyboard work on ics?

Sent from my Xperia X10 using XDA

GuilhermeXOT said:

JAF rom uses gingerbread keyboard which doesnt have swype feature right? Is there a way to gett Xperia S keyboard from v20 on JAF so i can get my swype back? Thx

Sent from my Xperia X10 using XDA

Click to expand...

Click to collapse

, flash this Xperia keyboard :
http://xdaforums.com/showthread.php?t=1489214&page=623

FYI

---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------

AdX9170 said:

Try the sola keyboard that bares posted a few pages back.
Oh and @bares, wud the sola keyboard work on ics?

Sent from my Xperia X10 using XDA

Click to expand...

Click to collapse

For ICS theme right ? sure

FYI

help, how can i install another Text-To-Speech engine like SVOX or LoquendoTTS? i don't understand, i mean i installed the application and its there but it didn't work when i switch to it, it is fixed with PICO engine( feels like i'm listening to a lady robot ). I'm using JAF ROM with Ferakernel in my X10 (FYI)...thanks in advance

Conclusion

Here is my conclusion

After using it since it's release, I'm quitting. "Why?" you ask. And here is the answer:

After a thousand reboots, my phone is still slow. "But you got had done something wrong in installation!" no, I swear. You know something wrong is coming when none of the "optional apps" weren't installed. I know that Feralab's is a pain in the ass to install, you have to do a lot of **** you hadn't did with any other rom... but ay... i really did everything right.

This ROM is a HUGE step forward since the last release: I haven't seen any WLOD, any random reboots, The texting is really good but it's still chocking a lot. I have installed the "Draw Something" and god.. OH GOD how slow it is. Google Maps is running in the same **** it was before: megaslow, unless you reboot your phone to use it.

Last time I said "have you ever test it before release?" someone got offended and said "we extensively tested it" and bla bla bla... I don't doubt it, but might have tested only with his own stuff... So, what happens? A lot of people with problems with the rom, and it was not a surprise when I head back here to this topic and face a lot of "to work this you have to do this trick" in a lot different issues, and that I hate a lot. Dammit!

Other thing I've percepted is that people is overclocking the Kernel thinking that it will turn the processor faster to run the ROMs, but they're forgetting about the processor's cache. So, it got faster, than slow again because of the cache. And it generates a lot of program chocking. So IF you can do it with a normal Kernel, do it, and you wont need to "delete file in /sys bla bla bla to do it and yar yar yar".

I'm getting to the conclusion that any (read it: NONE) of the custom ROMs work fine. And you know why? Because the "developers" think like those guys that tune cars: "Let's put this Porshe engine in this Volkswagen 72, repair and improve it visually and let's roll the *****!" and then got surprised when it disintegrates after 50mph. No doubt that Feralab's, for example, is really beautiful, has a lot of resources, it's easy to use, it's fast (the navigation), but really doesn't work FOR ME.

When someone release a version that's gonna be "You just have to install and it's gonna work entirely" I try again. Now it's time to get back to the stock ROM. it's ugly, the navigation is slow, its outmoded... but it works fine.

hi

I just install the JAF rom but its missing som Danish letters æ, ø and å ... on the keyboard and the system is in the fix for that ??

Wow, fallenearth,
What happened problem do you get actually?

Jaf works just fine,why go back to stock?

I have owned my x10 for 2years, tried alot of ROMs. And I think jaf is very good in terms of performance and battery duration.

I am on unlocked bootloader, with Jaf ROM and ferakernel now, using setcpu to set the frequency down to 998 .

Everything works fine.

Sent from my x10 using xda premium

Bares said:

, flash this Xperia keyboard :
http://xdaforums.com/showthread.php?t=1489214&page=623

FYI

---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------



For ICS theme right ? sure

FYI

Click to expand...

Click to collapse

lol no no.. why would it not work on ics theme?? no i installed cm9 ICS.. its not getting installed in that. maybe manifest is set to max API less than that for ICS?

JAF ROM I've tried this, everything works fine, but there are still bugs that I found, the name of the contact can not use images from the gallery.

Apif Fuloh said:

JAF ROM I've tried this, everything works fine, but there are still bugs that I found, the name of the contact can not use images from the gallery.

Click to expand...

Click to collapse

+1

Sent from my x10 using xda premium

Bares said:

Whats I'm trying to say is : Don't undervolt, have u tried to delete above 07g script file and reboot? That script for undervolt and battery saving, probably your device cant to handled it using this rom. And u r absolutely right, rom that was set volt/freq for cpu as long that settings are supporting by your kernel, that's y u need to verify vdd_level file (default voltage) above too. Sorry for my bad english
Also u can try to clockdown your CPU freq, ie : 1 GHz max.
And you can do this by edit below maxcpuon file in below dir :
system/xbin
And don't change it's permission's set !

PS : Donut also a good rom, but the performance,features and UI is medium ( this is my opinion only ).
And there is typo error in my previous post, should be : I'm not recommended to set higher value !!, sorry it's my bad, please ignore it

FYI

Click to expand...

Click to collapse

Good, now I'm almost there, how do I delete the file?
I tried astro file manager, but it sais error deleting file, and I don't get to save it after editing, there seem to be some smal errors in the file, probably just cosmetic say 1036 mhz comes after 1075 mhz and sutch, I tried to download another file manager, but it hasn't even got the option to delete, and the one that came with the rom only lets me into the sd card.
Thanks
Never mind, got it with es filemanager.
Now we just wait and hope...