Small stability update up now guys with some tweaks. Mr Bandwidth hopefully this will work for you mate
Hi Samno,
unfortunately my device still has problems with the new version:
with screen on, doesn't freeze so far, however music stutters a lot (even played with PowerAmp). And when screen off + powerAmp playing -> music enters infinite loop and device freezes in few minutes (even without oc).
Well, if other people have no problems, it's just my device which is a bit rebel, that's all. I understand is hard to develop for different devices when you cannot see or test by yourself. Don't worry
Thanks and keep on your good work!
This kernel is great. 0.5 seems to work with bravia engine mod (previous ones rather not) gaming is very good, maybe perfect comparing to every other kernel i used. Works like a lightening @1.4 GHz..
Great work.
Edit: on dolphin hd it plays full hd 1080p flash video on YouTube.com @1 GHz without stutters. The same is while recording full HD videos, when before this kernel i had some nasty lags every 30 seconds or less.
/Powered by Titan kernel 0.5 @ 1,4 GHz + gpu & other tweaks./
Great work.
Edit: on dolphin hd it plays full hd 1080p flash video on YouTube.com @1 GHz without stutters. The same is while recording full HD videos, when before this kernel i had some nasty lags every 30 seconds or less.
/Powered by Titan kernel 0.5 @ 1,4 GHz + gpu & other tweaks./
Last edited:
looks like i missed alot of things while i was gone
awesome works as always my friend...i just have one question...why the min freq is back to 300mhz....i dunno if there were an issue or not...but 196mhz is working fine for me.
awesome works as always my friend...i just have one question...why the min freq is back to 300mhz....i dunno if there were an issue or not...but 196mhz is working fine for me.
Well the only problem i found is a major issue. For example when i leave my phone on standby it is fine. But when i listen to music and i put my phone on standby while listening to music i cannot unlock it again. You can hear the music still but the phone does not respond what so ever until you pull the battery out..
hi meemo. i'm using the kernel with your fantastic rom dna_gb v2.0 and i don't seem to have the same issue? all is well as of this writing
I just noticed that gaming was a bit better on 5R than on 5, but for me using 5R is fine.
And I think that wipe dalvik + cache is strongly advised after/before applying a new kernel.
@meemo : you can hold power for 10 seconds to avoid pulling the battery out. I sometimes use that, but with 5 our 5r kernel i have no issues so far.
/Powered by Titan kernel 0.5 @ 1,4 GHz + gpu & other tweaks./
And I think that wipe dalvik + cache is strongly advised after/before applying a new kernel.
@meemo : you can hold power for 10 seconds to avoid pulling the battery out. I sometimes use that, but with 5 our 5r kernel i have no issues so far.
/Powered by Titan kernel 0.5 @ 1,4 GHz + gpu & other tweaks./
Last edited:
hi meemo. i'm using the kernel with your fantastic rom dna_gb v2.0 and i don't seem to have the same issue? all is well as of this writing
I guess it must be me then thanks i will look into it and see what is causing this problem on my phone...
@ Mr bandwidth sorry mate hopefully the next version will
@ iflpi thanks mate will try look see what i changed between them see it helps
@ shaab & sak thanks guys glad everythings good for you
@ evil slayer to test whether or not it was causing problems may not have done. Battery isn't as good now either bit better than stock still imo.
@ 0 cool this seems to be a random issue happens to me one rom ill test it will be fine then when i test a new version it dosnt.
@ meemo what app do you use ill try and recreate the problem give me a chance to try your rom
@ iflpi thanks mate will try look see what i changed between them see it helps
@ shaab & sak thanks guys glad everythings good for you
@ evil slayer to test whether or not it was causing problems may not have done. Battery isn't as good now either bit better than stock still imo.
@ 0 cool this seems to be a random issue happens to me one rom ill test it will be fine then when i test a new version it dosnt.
@ meemo what app do you use ill try and recreate the problem give me a chance to try your rom
@ Mr bandwidth sorry mate hopefully the next version will
@ iflpi thanks mate will try look see what i changed between them see it helps
@ shaab & sak thanks guys glad everythings good for you
@ evil slayer to test whether or not it was causing problems may not have done. Battery isn't as good now either bit better than stock still imo.
@ 0 cool this seems to be a random issue happens to me one rom ill test it will be fine then when i test a new version it dosnt.
@ meemo what app do you use ill try and recreate the problem give me a chance to try your rom
At the moment i am using the normal music player i don't use any other apps to listen to music though i did pay for power amp but don't use it at all.. Power am is not installed at all i can however download it and the licence which i paid for. I have whatsapp running to now alot other then that most programs are just games and general apps... And if you do use my rom i know it is V21D but i used the 21A drivers on it so you will need to use your 21A version..
this kernel work great with waterbear v5.Ok wireless and blutooth.Battery life is great!
Thx
Inviato dal mio LG-P920 con Tapatalk 2
Thx
Inviato dal mio LG-P920 con Tapatalk 2
Ok sammo i figured it out man i put the set cpu thing to 800mhz and on demeand that's most likely why it is not doing it now so i am sorted sorry about that great work sammo keep it up..
Hi I wanted to know why you have set as the minimum frequency of 300 mhz and 196mhz,did not save more battery? addition, the cell seems less fluid,ie for example when I want to close a call I you lock your cell
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
56Hi guys without further ado i present the Titan kernel for Gingerbread Rom's. Its my first kernel ever so go easy on me, i still dont know that much, im in no way a true developer, just a tinkerer. I made this initially because I got tired waiting for kernel development to take off so I researched and took to the challenge myself.This was compiled from LG's 21A souces with a few mods to get the radio's working and help from bedwa. There's still lots to do but i'll get there eventually.
Main Features:
-Overclocked Cpu To 1.2 Ghz Upto To 1.4 Ghz With Modules (Credits to bedwa)
-Overclock Module Support (Credits to tekahuna)
-Overclocked Gpu To 384 Mhz**
-Init.d Support (Credits to Thaiz)
-Cifs, Slow-Work & Tun Complied In
-Lots Of I/O & Governor Choices
-Carrier IQ disabled (Credits to Accura Team)
-Now compatible with most Gingerbread Roms*
-Undervolted
-Reduced Ghost Calls (Credits to RC)
Changelog 29/04/2012 V0.6R
-This Is Not A Final Release
-Added Cpu Seriel Info
-Readded 196Mhz
-Added NTFS File System Support (Untested)
-Tweaked Voltages For More Stability
-Small IO Tweaks
-LowMemoryKiller Tweaks
-Switched To JRCU SubSystem
-zCache
-Switched Kernel Compression To LZMA
Changelog 22/04/2012 V0.5:
-Modified UV Values
-Removed 196Mhz For Now
-Optimised Slub
-Modified HSI Frequency For Improved Reception
-Tweaked VM Read Aheads Again
-Custom Splash Image
-Compiled VFP With Neon
-TinyRCU Patch
-More Init Tweaks
-Camera Compression Tweak
-Modified SD Read Aheads To Thiaizs Values***(Should Mean Reduced Music Stutter)
-Reverted HZ To 128 For Helping Bluetooth Issues
Changelog 10/04/2012 V0.4.2:
Only update To This If You Have Either Of These Issues
-Possible Fix For Blackscreen During Charging
-Reverted To V0.3.1 Memory Management
Changelog 09/04/2012 V0.4:
-Intergrated Patch To Eliminate/Reduce Ghost Calls
-Lowered Cpu, Gpu, Dsp, Sim Voltages
-Added Lower Frequency 196 Mhz To Help Save Battery
-Changed Ram Management
-Modified Cpu Idle Stuff
-Disabled Fsync
-Some ARM Tweaks And Patches
-Enabled RCUFastNoHz
-Load Frequency Tweaks
-CFS Scheduling
-Tweaked Governors For Battery
-NoHz Tweaks
-Ext4 Enhancements
-SMP Tweaks
-Ramdisk Tweaks
-Some Debug Stuff Removed
Changelog 01/04/2012 V0.3.1:
-GPU Overclock TO 384Mhz**
-Cifs, Slow-Work & Tun Complied In Both Kernels
-Added Vr IO Scheduler & Tweaked (Set As Default)
-Added Sio IO Scheduler & Tweaked
-Added Aggressive Governor & Tweaked
-Added Gallimaufry Governor & Tweaked
-Added SmartAssV2 Governor & Tweaked
-Tweaked Hotplug For Better Response
-More Vm And General Memory Tweaks
-Modified Deadline Scheduler
-Modified Cpu Sleep Response
Changelog 27/03/2012 V0.2:
-Big Overhaul Of Memory Management
-Noop I/O Scheduler Set As Default
-Raise Hz To 500
To Add:
-More Battery Opimizations
-More Memory Tweaks
-Under Volting/Over Volting Interface
-USB OTG
-HID Support (Started Work On It)
-More Kernel Tweaks!!
This should be compatible with all GB roms. With the module overclock ive managed to pull 1.4Ghz stable and its lightning quick. Please post your highest frequences and benches with what rom your using too please. It would be good if anyone could help me implement my to add list too.
Big shout out back to bedwa too, thanks mate.
Notes & Important Details
NOTE: Install The Correct Version For You Through CWM.
NOTE: *This may not work correctly on roms which are using multiple/hybrid rom libraries. It should almost certainly work on pure 21A and 21D roms, your milage may vary on anything else.
NOTE: **Although The Gpu Is Overclocked Im Quite Sure You Wont See Any Performance Gain. Ive Tried At 450 & 512 Mhz Similar Frame Rate But With Artifacts On Screen. So This May Go Back to Stock In Later Updates For Stability Reasons. But at Least I Know What Im Changing Works In Some Fashion.
NOTE: ***These Read Ahead Values Do Affect Benchmark Scores For SD Read Speeds. But This Hasnt Really Made Any Other Problems That I Know Of.
IMPORTANT! Please tell me what rom and kernel you are using if your having problems so I can test, dont just say its not working and like i said above hybrid roms may not work correctly until i find a way around multiple kernel versions.
Kernel Source
My Git Complying With GPL & XDA Rules: https://github.com/samno1607
Guides, Info & Other Useful Stuff
SetCPU App For Changing Cpu Frequency: http://xdaforums.com/showthread.php?t=505419
How To Use Overclock Modules: http://xdaforums.com/showthread.php?t=1355474
Module Overclock App: http://xdaforums.com/showthread.php?t=1592110
IO & Governor Info: http://xdaforums.com/showthread.php?t=14437315Omar my games are fine in 3d, they actually seem better, maybe the overclock is working. Differnces between .3.1 & .3 is it has sum hid testing stuff removed incase it caused wifi probs or bt, turns out it didnt make any difference. So there the same basically. Regarding gpu drivers i may look into that but if it breaks 3d functions then it will be a no go. No problem sak glad we could help you after all that trouble.
@omar try pressing the 3d button a few times to activate and deactivate the 3d effect, its the only thing i can suggest.
@ arsen could give some more detail pls everything seens fine to me.
@ evil slayer any progress mate
@ everyone thanks for you feedback and co.mments guys, this version will be hard to updare on now it has so much stuff so it may be a while before any updates, also what setups have you guy settled into. Gonna try sio and aggressive tommorow see how it holds up. Best so far seems to be default ones, but you can never have too much choice though can you.
