VomerGuides [M7]: S-OFF, SuperCID, Firmware Upgrade & Custom Recovery

Search This thread
By:
Advanced…
vomer

vomer

Senior Member
Nov 21, 2008
4,615
8,945
Welcome to VomerGuides: [M7 Edition]

Have an M8? There's a guide for that!

Hey folks!

Many of you will find this post similar to the ARHD posts I have made.

Based on several suggestions and PM's - I decided to make a separate thread in the hope that this will stop some repeated questions asked in multiple threads.

Following this guide will allow you to (in this sequence):

- Achieve S-OFF using revone
- Change your CID to SuperCID (allowing you to bypass regional ROM restrictions)
- Upgrade to the latest firmware (UL edition) without loosing any data on your SD card
- Install the latest TWRP recovery

Donations:

I do not believe that I should be charging for information sharing. However, having the physical hardware helps me improve this content and support you better as I do require hardware to test/work on for all my content and it's not always possible for me to find someone to borrow devices from.

If you would like to support my work donate to me via:



Thank you :)

Disclaimer & Copyrights:

I test everything before I share these guides - thus I know they work as intended. However, please proceed at your own risk as I do not take any liability for your devices.

Please do not copy contents of this guide without explicit permission from me. I like to maintain a set standard and quality of the information I share.

Please refrain from posting mirrors as I like to track downloads - I primarily use AndroidFileHost and they mirror files on multiple servers automatically.


I like to track downloads - so please use the official links provided in this guide.
Here is a mirror for all the files in case main links down:

- Firmwares
- Everything Else

Other useful files:

These files can be used to replace/add features in the latest firmware zips posted in this thread.

- Hboot v1.44: http://d-h.st/1zJ

- Touch panel Driver from firmware 2.24.401.1: http://d-h.st/lL4

- Flash-able Radio Collection: http://xdaforums.com/showthread.php?t=2419699

- Going back to stock ROM: http://xdaforums.com/showthread.php?t=2265618
Click to expand...
Click to collapse
Windows Users: It's a good idea to install the HTC drivers on your pc: http://d-h.st/4LL or use this toolkit to install the drivers.

READING & FOLLOWING EACH STEP IS KEY TO SUCCESS.

SECTION 0: SYSTEM PREPARATION:

First we need to get you ADB and fastboot

Windows Users, download this file and extract the folder called "adb" to your C: drive. Your path should look like this:

Code: 
C:\adb\
Also, you will need to open a command prompt window using this method:

Code: 
Go to the C:\adb\ folder - hold down SHIFT key and RIGHT-CLICK and select "Open command window here".


Mac/Linux users install ADB & fastboot using: Download

1. Extract the downloaded zip to your desktop
2. Open Terminal and type in:

Code: 
su
cd Desktop/Android/ (note: Android is the directory extracted from zip file)

3. Now type

Code: 
./ADB-Install-Mac.sh

Note: By using the method above, your adb and fastboot files are stored at this location on your Mac: /usr/bin/

SECTION 1: S-OFF & SUPERCID

Downloads Required:
- revone (hboot 1.44)
- rumrunner (hboot 1.5x)

Note: If you are running a 4.4 based ROM and do not want to downgrade to a lower version to use revone or rumrunner - try this tool to S-OFF
Note: revone (used for s-off) has been reported to work best with 4.2.2 roms. Please install a 4.2.2 ROM before attempting S-OFF.

Note: If you are using rumrunner - please follow the instructions to s-off provided on the rumrunner link above. Steps below are for revone only.
Note: Read these useful tips before attempting S-OFF

Mac/Linux users: Save this file to your Desktop
Windows users: Save this file to the C:/adb/ folder

Also, before continuing - make sure you have USB Debugging enabled on your phone (Settings -> Developer Options -> USB Debugging)

If you do not see "Developer Options", Go to Settings > About phone > Software > More > click on build number 10 times. This should enable that section.

Part 1

1. Push revone to your device:

Code: 
Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
Windows: adb push C:/adb/revone /data/local/tmp/
2. Open adb shell by writing:

Code: 
adb shell
su
3. Write in the shell:

Code: 
cd /data/local/tmp
4. Then write this:

Code: 
chmod 755 revone
5. Next, write the following command:

Code: 
./revone -P
6. Revone reported that I needed to reboot and try again. So I wrote :

Code: 
reboot

[COLOR=Red][B]Note:[/B][/COLOR]
[B]Stuck with error: -1?[/B]

When initiating a reboot after "./revone -P" please press and hold the power button for 15 seconds.

To start the entire process from scratch please power off the device and  wait 30 seconds, turn it on and continue to ."/revone -P".
7. Close your Command Prompt/Terminal window. Open it again and type:

Code: 
adb shell
su
8. Write (to change directory in the phone):

Code: 
cd /data/local/tmp
8a. Write the following command:

Code: 
./revone -P (it will now say success and ask to reboot phone - do it by typing: reboot)
8b. Once rebooted - repeat steps 7 & 8

9. To get S-OFF & unlock, write the following command:

Code: 
./revone -s 0 -u
10. revone will report success. Exit the shell:

Code: 
exit (or just close terminal and open a new one)
11. Reboot into bootloader:

Code: 
adb reboot bootloader
12. Check if the bootloader screen show's you as S-OFF (it should be in the in the first line under the "pink" highlighted text)

13. Reboot the phone

14. Start the adb shell, again:

Code: 
adb shell
15. Change to the folder where revone is stored by typing:

Code: 
cd /data/local/tmp
16. Request revone to reset tampered flag by typing:

Code: 
./revone -t
17. Exit the adb shell by writing: exit (or just close terminal and open a new one)

18. Reboot to the bootloader by writing:

Code: 
adb reboot bootloader
19. Phone should now be S-OFF and tampered flag should be gone :cowboy:

Now stay at this bootloader screen with your phone plugged in to the PC - and follow the steps in Part 2 below.

Part 2

Now lets get you SuperCID:

1. Open terminal/command prompt and type (copy paste command below or make sure there a eight 1's):

Code: 
fastboot oem writecid 11111111
2. Reboot phone into bootloader mode (by typing: adb reboot bootloader) and verify CID#. It should look similar to this:

RqUzYMD.jpg



SECTION 2: FIRMWARE UPGRADE

FIRMWARE FAQ:

Q: Do I need S-OFF for firmware flashing?

A: YES!

Q: Do I NEED to update my firmware?

A: NO! But doing so ensures optimal phone performance.

Q: Does it matter when I flash the firmware (before or after new ROM install)

A: NO!

Q: Will updating the firmware erase my SD card or Apps?

A: NO! The firmware files provided in this guide take care of this for you so none of those get erased.

Q: If I only flash the ROM, will I get updated to the latest firmware?

A: NO!

Q: Can I install a U edition firmware on a UL edition phone?

A: YES, but you might loose the ability to connect to LTE or have some other incompatibilities.

FIRMWARE FLASHING:

Firmware Downloads (SD card will not be wiped using these files):

4.2.2 Base Firmwares:

- 2.17.401.1: http://d-h.st/PJv (Rename to firmware.zip after downloading)

- 2.24.401.1: http://d-h.st/WO9 (Rename to firmware.zip after downloading)

- 2.24.401.8: http://d-h.st/qPT (Rename to firmware.zip after downloading) *LATEST*

4.3 Base Firmwares:

- 3.06.1700.10: http://d-h.st/maA (Rename to firmware.zip after downloading)

- 3.09.401.1: http://d-h.st/PSE (Rename to firmware.zip after downloading)

- 3.17.401.2: http://d-h.st/bgE (Rename to firmware.zip after downloading)

- 3.22.1540.1: http://d-h.st/LLO (Rename to firmware.zip after downloading)

- 3.57.401.500 : http://d-h.st/z6g (Rename to firmware.zip after downloading)

- 3.62.401.1 : http://d-h.st/in6 (Rename to firmware.zip after downloading) *LATEST*

4.4 Base

- 4.06.1540.2 (Rename to firmware.zip after downloading)

- 4.06.1540.3 (Rename to firmware.zip after downloading)

- 4.19.401.8 (Rename to firmware.zip after downloading)

- 4.19.401.9 (Rename to firmware.zip after downloading)

- 4.19.401.11 (Rename to firmware.zip after downloading)

- 5.11.1540.9 (Rename to firmware.zip after downloading)

- 5.11.401.10 (Rename to firmware.zip after downloading)

- 6.06.401.1 (Rename to firmware.zip after downloading)

- 6.09.401.5 (Rename to firmware.zip after downloading)

- 6.09.401.10 (Rename to firmware.zip after downloading) *LATEST*

-----

Windows users, you need to do these steps first:
- move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
- next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

-----

First, plug in phone to PC and type this in terminal/command prompt:

Code: 
adb reboot bootloader
-----

Let's start by checking current system details. Type:

Code: 
fastboot getvar all

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000 [COLOR=Red][B]< This is your bootloader version[/B][/COLOR]
(bootloader) version-baseband: 4A.16.3250.24 [COLOR=Red][B]< This is your radio version[/B][/COLOR]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17 [COLOR=Red][B]< This is your firmware version[/B][/COLOR]
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: <you don't need to know my serial#>
(bootloader) imei: <you don't need to know my IMEI>
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111 [COLOR=Red][B]< This is your CID[/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4077mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Now type:

Code: 
fastboot reboot-bootloader
After that, type:

Code: 
fastboot oem rebootRUU 

Note: You should see a silver HTC logo come up on your phone after executing this command.
Note: if this command freezes,  just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:

Code: 
fastboot flash zip /Users/vomer/Desktop/firmware.zip

Windows users: your command will look something like this: fastboot flash zip C:\adb\firmware.zip
Got this:

Code: 
sending 'zip' (71868 KB)...
OKAY [  4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
Repeated same command:

Code: 
fastboot flash zip /Users/vomer/Desktop/firmware.zip
Got this:

Code: 
sending 'zip' (71868 KB)...
OKAY [  4.884s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) start image[cir] unzipping & flushing...
(bootloader) ...... Successful
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[tp] unzipping & flushing...
(bootloader) ...... Successful
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,26
(bootloader) [RUU]WP,radio,53
(bootloader) [RUU]WP,radio,79
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
OKAY [ 39.601s]
finished. total time: 44.485s


Note: On my phone's screen the green bar did not go to 100% of the bar ... but everything seemed ok so I moved on.

Last Step:

Code: 
fastboot reboot
Then I went back to the bootloader mode (after the phone reboots successfully):

Code: 
adb reboot bootloader
Checked if the update worked:

Code: 
fastboot getvar all

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-baseband: 4A.17.3250.14 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: you don't need to know my serial#
(bootloader) imei: you don't need to know my IMEI#
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111 [COLOR=Red][B]< Oh Look! I'm Superman :) [/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4331mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.061s

SECTION 3: RECOVERY

Note: I personally prefer TWRP - so my guide below points to using TWRP.
If you like CWM, you can follow the same steps but with the latest CWM file.

----

Get latest TWRP: http://techerrata.com/browse/twrp2/m7ul

With your phone plugged into your PC, type in:

Code: 
adb reboot bootloader
Once in bootloader mode, type:

Code: 
Mac/Linux: fastboot flash recovery /Users/vomer/Desktop/openrecovery-twrp-2.6.1.0-m7.img
Windows: fastboot flash recovery C:\adb\openrecovery-twrp-2.6.1.0-m7.img
Then:
Code: 
fastboot reboot
You are now the the latest version of TWRP.

----

That's it! Enjoy your new found freedom ;)
 
Last edited:
  • Like
Reactions: davidcie, HoffaLompen, Smoke_69 and 574 others
A

aulterra

Senior Member
Dec 11, 2010
218
2
Wait... I need to re-lock my bootloader and remove root and go back to stock to get S-OFF? o.o?
 
LiquidSolstice

LiquidSolstice

Inactive Recognized Developer
Jan 17, 2008
5,182
5,181
Wonderful thread. It's of no use to me, but I tossed you a Thanks because when it concerns S-OFF, the simplest and most easy-to-follow guides make all the difference for frightened users.

Thanks!
 
  • Like
Reactions: PuRE IVIonztah and vomer
A

aulterra

Senior Member
Dec 11, 2010
218
2
vomer said:
Yes

Sent from my Nexus 7
Click to expand...
Click to collapse

Ok sounds great. Do you think that once I have S-OFF and Super CID that the Firmware update will fix my Sleep of Death issues on CM roms? codeworkx said the issue is from what he said a KGSL derp or something. The firmware update would update the gpu driver or update stuff that would effect the gpu driver?

Just wondering, thanks for the amazing guide btw, easiest i've seen so far to follow. Will be doing it tonight after work. Wanted to do it now but I decided not to since I need my phone charged as much as possible before I go to work today (have to get into work early and I didn't know until before so My phone was nearly flat xD)
 
vomer

vomer

Senior Member
Nov 21, 2008
4,615
8,945
aulterra said:
Ok sounds great. Do you think that once I have S-OFF and Super CID that the Firmware update will fix my Sleep of Death issues on CM roms? codeworkx said the issue is from what he said a KGSL derp or something. The firmware update would update the gpu driver or update stuff that would effect the gpu driver?

Just wondering, thanks for the amazing guide btw, easiest i've seen so far to follow. Will be doing it tonight after work. Wanted to do it now but I decided not to since I need my phone charged as much as possible before I go to work today (have to get into work early and I didn't know until before so My phone was nearly flat xD)
Click to expand...
Click to collapse

I am not sure on gpu drivers, but this should solve the issue if it is firmware related.

Sent from my Nexus 7
 
  • Like
Reactions: dirtrider129, crniliner and hltbest
michmeister

michmeister

Senior Member
Apr 7, 2013
1,935
525
boston
Do you no how to get rid of the red writing in boot up splash screen. One thread I read is very confusing. Do I just flash the modified hboot zip?

Sent from my HTC One
 
cvsolidx17

cvsolidx17

Senior Member
Sep 30, 2008
413
90
Boston
Excellent guide, should definitely be stickied. Thanks Vomer :beer: :beer: :beer:

Sent from my HTC One using Tapatalk 2
 
You must log in or register to reply here.

Similar threads

baadnewz
[ROM]InsertCoin M7 7.1.3 | Sense 7 Android L | Tweaks
Replies
14K
Views
2M
N
ngocanh3996
mike1986.
[ROM] Android Revolution HD 93.0 | High Quality & Performance | 7.19.401.30 | 5.0.2
Replies
90K
Views
13M
filuuu
filuuu
jolishj
  • Poll
[HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning)
Replies
1K
Views
535K
H
hasnatumar
Sneakyghost
[FIRMWARE] | [GUIDE] | [M7_UL] | Collection - Firmware | 7.19.401.51
Replies
3K
Views
623K
L
LukaTCE
santod040
  • Locked
[5.0.2] Lollipop | Unofficial CM12 | HTC One M7 | Android 5.0.2 [01-05-15]
Replies
3K
Views
698K
santod040
santod040

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 577
    vomer
    vomer
    Welcome to VomerGuides: [M7 Edition]

    Have an M8? There's a guide for that!

    Hey folks!

    Many of you will find this post similar to the ARHD posts I have made.

    Based on several suggestions and PM's - I decided to make a separate thread in the hope that this will stop some repeated questions asked in multiple threads.

    Following this guide will allow you to (in this sequence):

    - Achieve S-OFF using revone
    - Change your CID to SuperCID (allowing you to bypass regional ROM restrictions)
    - Upgrade to the latest firmware (UL edition) without loosing any data on your SD card
    - Install the latest TWRP recovery

    Donations:

    I do not believe that I should be charging for information sharing. However, having the physical hardware helps me improve this content and support you better as I do require hardware to test/work on for all my content and it's not always possible for me to find someone to borrow devices from.

    If you would like to support my work donate to me via:



    Thank you :)

    Disclaimer & Copyrights:

    I test everything before I share these guides - thus I know they work as intended. However, please proceed at your own risk as I do not take any liability for your devices.

    Please do not copy contents of this guide without explicit permission from me. I like to maintain a set standard and quality of the information I share.

    Please refrain from posting mirrors as I like to track downloads - I primarily use AndroidFileHost and they mirror files on multiple servers automatically.


    I like to track downloads - so please use the official links provided in this guide.
    Here is a mirror for all the files in case main links down:

    - Firmwares
    - Everything Else

    Other useful files:

    These files can be used to replace/add features in the latest firmware zips posted in this thread.

    - Hboot v1.44: http://d-h.st/1zJ

    - Touch panel Driver from firmware 2.24.401.1: http://d-h.st/lL4

    - Flash-able Radio Collection: http://xdaforums.com/showthread.php?t=2419699

    - Going back to stock ROM: http://xdaforums.com/showthread.php?t=2265618
    Click to expand...
    Click to collapse
    Windows Users: It's a good idea to install the HTC drivers on your pc: http://d-h.st/4LL or use this toolkit to install the drivers.

    READING & FOLLOWING EACH STEP IS KEY TO SUCCESS.

    SECTION 0: SYSTEM PREPARATION:

    First we need to get you ADB and fastboot

    Windows Users, download this file and extract the folder called "adb" to your C: drive. Your path should look like this:

    Code: 
    C:\adb\
    Also, you will need to open a command prompt window using this method:

    Code: 
    Go to the C:\adb\ folder - hold down SHIFT key and RIGHT-CLICK and select "Open command window here".


    Mac/Linux users     install ADB & fastboot using: Download

    1. Extract the downloaded zip to your desktop
    2. Open Terminal and type in:

    Code: 
    su
cd Desktop/Android/ (note: Android is the directory extracted from zip file)

    3. Now type

    Code: 
    ./ADB-Install-Mac.sh

    Note: By using the method above, your adb and fastboot files are stored at this location on your Mac: /usr/bin/

    SECTION 1: S-OFF & SUPERCID

    Downloads Required:
    - revone (hboot 1.44)
    - rumrunner (hboot 1.5x)

    Note: If you are running a 4.4 based ROM and do not want to downgrade to a lower version to use revone or rumrunner - try this tool to S-OFF
    Note: revone (used for s-off) has been reported to work best with 4.2.2 roms. Please install a 4.2.2 ROM before attempting S-OFF.

    Note: If you are using rumrunner - please follow the instructions to s-off provided on the rumrunner link above. Steps below are for revone only.
    Note: Read these useful tips before attempting S-OFF

    Mac/Linux users: Save this file to your Desktop
    Windows users: Save this file to the C:/adb/ folder

    Also, before continuing - make sure you have USB Debugging enabled on your phone (Settings -> Developer Options -> USB Debugging)

    If you do not see "Developer Options", Go to Settings > About phone > Software > More > click on build number 10 times. This should enable that section.

    Part 1

    1. Push revone to your device:

    Code: 
    Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
Windows: adb push C:/adb/revone /data/local/tmp/
    2. Open adb shell by writing:

    Code: 
    adb shell
su
    3. Write in the shell:

    Code: 
    cd /data/local/tmp
    4. Then write this:

    Code: 
    chmod 755 revone
    5. Next, write the following command:

    Code: 
    ./revone -P
    6. Revone reported that I needed to reboot and try again. So I wrote :

    Code: 
    reboot

[COLOR=Red][B]Note:[/B][/COLOR]
[B]Stuck with error: -1?[/B]

When initiating a reboot after "./revone -P" please press and hold the power button for 15 seconds.

To start the entire process from scratch please power off the device and  wait 30 seconds, turn it on and continue to ."/revone -P".
    7. Close your Command Prompt/Terminal window. Open it again and type:

    Code: 
    adb shell
su
    8. Write (to change directory in the phone):

    Code: 
    cd /data/local/tmp
    8a. Write the following command:

    Code: 
    ./revone -P (it will now say success and ask to reboot phone - do it by typing: reboot)
    8b. Once rebooted - repeat steps 7 & 8

    9. To get S-OFF & unlock, write the following command:

    Code: 
    ./revone -s 0 -u
    10. revone will report success. Exit the shell:

    Code: 
    exit (or just close terminal and open a new one)
    11. Reboot into bootloader:

    Code: 
    adb reboot bootloader
    12. Check if the bootloader screen show's you as S-OFF (it should be in the in the first line under the "pink" highlighted text)

    13. Reboot the phone

    14. Start the adb shell, again:

    Code: 
    adb shell
    15. Change to the folder where revone is stored by typing:

    Code: 
    cd /data/local/tmp
    16. Request revone to reset tampered flag by typing:

    Code: 
    ./revone -t
    17. Exit the adb shell by writing: exit (or just close terminal and open a new one)

    18. Reboot to the bootloader by writing:

    Code: 
    adb reboot bootloader
    19. Phone should now be S-OFF and tampered flag should be gone :cowboy:

    Now stay at this bootloader screen with your phone plugged in to the PC - and follow the steps in Part 2 below.

    Part 2

    Now lets get you SuperCID:

    1. Open terminal/command prompt and type (copy paste command below or make sure there a eight 1's):

    Code: 
    fastboot oem writecid 11111111
    2. Reboot phone into bootloader mode (by typing: adb reboot bootloader) and verify CID#. It should look similar to this:

    RqUzYMD.jpg



    SECTION 2: FIRMWARE UPGRADE

    FIRMWARE FAQ:

    Q: Do I need S-OFF for firmware flashing?

    A: YES!

    Q: Do I NEED to update my firmware?

    A: NO! But doing so ensures optimal phone performance.

    Q: Does it matter when I flash the firmware (before or after new ROM install)

    A: NO!

    Q: Will updating the firmware erase my SD card or Apps?

    A: NO! The firmware files provided in this guide take care of this for you so none of those get erased.

    Q: If I only flash the ROM, will I get updated to the latest firmware?

    A: NO!

    Q: Can I install a U edition firmware on a UL edition phone?

    A: YES, but you might loose the ability to connect to LTE or have some other incompatibilities.

    FIRMWARE FLASHING:

    Firmware Downloads (SD card will not be wiped using these files):

    4.2.2 Base Firmwares:

    - 2.17.401.1: http://d-h.st/PJv (Rename to firmware.zip after downloading)

    - 2.24.401.1: http://d-h.st/WO9 (Rename to firmware.zip after downloading)

    - 2.24.401.8: http://d-h.st/qPT (Rename to firmware.zip after downloading) *LATEST*

    4.3 Base Firmwares:

    -     3.06.1700.10: http://d-h.st/maA (Rename to firmware.zip after downloading)

    - 3.09.401.1: http://d-h.st/PSE (Rename to firmware.zip after downloading)

    - 3.17.401.2: http://d-h.st/bgE (Rename to firmware.zip after downloading)

    - 3.22.1540.1: http://d-h.st/LLO (Rename to firmware.zip after downloading)

    - 3.57.401.500 : http://d-h.st/z6g (Rename to firmware.zip after downloading)

    - 3.62.401.1 : http://d-h.st/in6 (Rename to firmware.zip after downloading) *LATEST*

    4.4 Base

    - 4.06.1540.2 (Rename to firmware.zip after downloading)

    - 4.06.1540.3 (Rename to firmware.zip after downloading)

    - 4.19.401.8 (Rename to firmware.zip after downloading)

    - 4.19.401.9 (Rename to firmware.zip after downloading)

    - 4.19.401.11 (Rename to firmware.zip after downloading)

    - 5.11.1540.9 (Rename to firmware.zip after downloading)

    - 5.11.401.10 (Rename to firmware.zip after downloading)

    - 6.06.401.1 (Rename to firmware.zip after downloading)

    - 6.09.401.5 (Rename to firmware.zip after downloading)

    - 6.09.401.10 (Rename to firmware.zip after downloading) *LATEST*

    -----

    Windows users, you need to do these steps first:
    - move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
    - next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

    -----

    First, plug in phone to PC and type this in terminal/command prompt:

    Code: 
    adb reboot bootloader
    -----

    Let's start by checking current system details. Type:

    Code: 
    fastboot getvar all

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000 [COLOR=Red][B]< This is your bootloader version[/B][/COLOR]
(bootloader) version-baseband: 4A.16.3250.24 [COLOR=Red][B]< This is your radio version[/B][/COLOR]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17 [COLOR=Red][B]< This is your firmware version[/B][/COLOR]
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: <you don't need to know my serial#>
(bootloader) imei: <you don't need to know my IMEI>
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111 [COLOR=Red][B]< This is your CID[/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4077mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
    Now type:

    Code: 
    fastboot reboot-bootloader
    After that, type:

    Code: 
    fastboot oem rebootRUU 

Note: You should see a silver HTC logo come up on your phone after executing this command.
Note: if this command freezes,  just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
    Finally:

    Code: 
    fastboot flash zip /Users/vomer/Desktop/firmware.zip

Windows users: your command will look something like this: fastboot flash zip C:\adb\firmware.zip
    Got this:

    Code: 
    sending 'zip' (71868 KB)...
OKAY [  4.936s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.410s
    Repeated same command:

    Code: 
    fastboot flash zip /Users/vomer/Desktop/firmware.zip
    Got this:

    Code: 
    sending 'zip' (71868 KB)...
OKAY [  4.884s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) start image[cir] unzipping & flushing...
(bootloader) ...... Successful
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[tp] unzipping & flushing...
(bootloader) ...... Successful
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,26
(bootloader) [RUU]WP,radio,53
(bootloader) [RUU]WP,radio,79
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
OKAY [ 39.601s]
finished. total time: 44.485s


    Note: On my phone's screen the green bar did not go to 100% of the bar ... but everything seemed ok so I moved on.

    Last Step:

    Code: 
    fastboot reboot
    Then I went back to the bootloader mode (after the phone reboots successfully):

    Code: 
    adb reboot bootloader
    Checked if the update worked:

    Code: 
    fastboot getvar all

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-baseband: 4A.17.3250.14 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1 [COLOR=Red][B]< Looks New![/B][/COLOR]
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: you don't need to know my serial#
(bootloader) imei: you don't need to know my IMEI#
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111 [COLOR=Red][B]< Oh Look! I'm Superman :) [/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4331mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.061s

    SECTION 3: RECOVERY

    Note: I personally prefer TWRP - so my guide below points to using TWRP.
    If you like CWM, you can follow the same steps but with the latest CWM file.

    ----

    Get latest TWRP: http://techerrata.com/browse/twrp2/m7ul

    With your phone plugged into your PC, type in:

    Code: 
    adb reboot bootloader
    Once in bootloader mode, type:

    Code: 
    Mac/Linux: fastboot flash recovery /Users/vomer/Desktop/openrecovery-twrp-2.6.1.0-m7.img
Windows: fastboot flash recovery C:\adb\openrecovery-twrp-2.6.1.0-m7.img
    Then:
    Code: 
    fastboot reboot
    You are now the the latest version of TWRP.

    ----

    That's it! Enjoy your new found freedom ;)
    View
    38
    vomer
    vomer
    descenpet said:
    finally you made own thread :cool:
    Click to expand...
    Click to collapse
    haha yes sir! got so many PM's to do it but I didn't want to half-ass it. Had some time today so decided to get it done the proper way! :D
    View
    11
    vomer
    vomer
    5.11.1540.9 is now live :good: :D
    View
    9
    vomer
    vomer
    Guide updated with latest firmware 2.24.401.8 :good:
    View
    9
    Alexandr82
    Alexandr82
    6.09.401.5-custom-full.zip - 28.90 MB (only original img files, no data wipe)
    View

New posts