[OFFICIAL] Kyrillos' ROM Problems, Questions & Answers

Search This thread
By:
Advanced…
R

RenardBlanc

New member
Jan 30, 2011
4
0
Souillac
www.tititortue.net
V10 final on i5800 teos

Hello to you,

I'm on V10 final, I try to go before reaching the 10.3 on the 10.1 and 10.2. I try to flash and / or update.
But an annoying display problems see blocking is done on two applications I use. I wanted to know if your 10.3 was settling the problem because it could come from the new GPU is finalized. GoogleMaps on the roads layer name is unreadable and distorted. On the application Waze the visual distortion and maps are unreadable causing an application crash. I said that I have that on his problems v10.1 and v10.2. someone you already had it's problems and you can test your sides. I love your work but I can not do without Waze.

thx
 
ASakovoy

ASakovoy

Senior Member
Jan 29, 2011
59
1
camera does not work well!

Hello, I installed the excellent Krillo's rom version 10.2 and within 15 days 10.3. everything works perfect, congratulations on this creation. but I have a problem. the camera.
The first is that after taking the photo capture instant green leaves (not important):rolleyes:
second problem. the video does not work. (if that is important)::confused:
I play the record button get this message:
We're sorry.
Camcorder activity (in application Camera) is not responding.
force close or wait -----
install a few days ago Kermel Arakmar (and still the same)
Any solution?

---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------

Hello, I installed the excellent Krillo's rom version 10.2 and within 15 days 10.3. everything works perfect, congratulations on this creation. but I have a problem. the camera.
The first is that after taking the photo capture instant green leaves (not important):rolleyes:
second problem. the video does not work. (if that is important)::confused:
I play the record button get this message:
We're sorry.
Camcorder activity (in application Camera) is not responding.
force close or wait -----
install a few days ago Kermel Arakmar (and still the same)
Any solution?
 
H

H0pesfall

Member
May 14, 2012
11
3
I've been using Kyrillos V10.1 for about 2 months now and i can only give words of praise...runs smooth and everything works...well almost everything

about an hour ago i updated to V10.3 and figured i would try some android games from the market...but i get some graphical errors (mostly white tiles instead of sprites) so i was wondering what's up with that and is it worth trying Chainfire 3D? what plugins should i use?

Thanks in advance :)
 
ASakovoy

ASakovoy

Senior Member
Jan 29, 2011
59
1
H0pesfall said:
I've been using Kyrillos V10.1 for about 2 months now and i can only give words of praise...runs smooth and everything works...well almost everything

about an hour ago i updated to V10.3 and figured i would try some android games from the market...but i get some graphical errors (mostly white tiles instead of sprites) so i was wondering what's up with that and is it worth trying Chainfire 3D? what plugins should i use?

Thanks in advance :)
Click to expand...
Click to collapse

Hello H0pesfall, at the beginning of the post explained several cases (page 1), including use of Chainfire 3D...
first of all it is advisable to read the explanation before asking.
welcome;)
 
  • Like
Reactions: H0pesfall
H

H0pesfall

Member
May 14, 2012
11
3
ASakovoy said:
Hello H0pesfall, at the beginning of the post explained several cases (page 1), including use of Chainfire 3D...
first of all it is advisable to read the explanation before asking.
welcome;)
Click to expand...
Click to collapse

i've read it :D but it's a little outdated info cuz it says i need v9 OC and i was referring to new 10.3 version...so i thought i'll ask just to be sure and you should update the first post if that guide also applies to newer versions :D

Also market is showing chainfire 3D isn't compatible with my phone (GT I5800 just to be clear XD) what's up with that?
 
Last edited:
ASakovoy

ASakovoy

Senior Member
Jan 29, 2011
59
1
H0pesfall said:
i've read it :D but it's a little outdated info cuz it says i need v9 OC and i was referring to new 10.3 version...so i thought i'll ask just to be sure and you should update the first post if that guide also applies to newer versions :D

Also market is showing chainfire 3D isn't compatible with my phone (GT I5800 just to be clear XD) what's up with that?
Click to expand...
Click to collapse


Hello, I have not tested Chainfire 3d, since I have had problems with overclocking and need to work, but you can get information on the website of author

http://xdaforums.com/showthread.php?t=1087427

have if it's something.:cool:
good luck
 
gerryg73

gerryg73

Senior Member
May 7, 2011
82
29
Rome
hi
10.3 works fine... I've got Kyrillos rom since 5.0 version... from v9 to 10.3 Waze isn't working anymore... any suggestions?
 
S

sureshkitty

New member
May 15, 2012
3
0
How to enter ClockWorkMode Recovery in Samsung Galaxy 3 apollo?

Hi All,

I'm a noob and just flashed Kyrillos' rom v9.0 and my phone is working great.

But I'm unable to proceed with Setup Hybrid Data2SD as I'm not sure how to enter ClockworkMod Recovery from my phone.

Please let me know what should I do to enter ClockworkMod Recovery in Samsung Galaxy 3 apollo.

Thanks in advance.
 
ASakovoy

ASakovoy

Senior Member
Jan 29, 2011
59
1
gerryg73 said:
hi
10.3 works fine... I've got Kyrillos rom since 5.0 version... from v9 to 10.3 Waze isn't working anymore... any suggestions?
Click to expand...
Click to collapse

Hello gerryg73, you tried to upgrade to the latest version of Waze? (3.0).
He thinks that many applications for android( 2.2) Krillos'rom 9.6 ...do not work with android 2.3.7 krillo's rom 10.3.;)
 
V

vivek77

New member
May 13, 2012
3
0
Navi Mumbai
Whie Ghot Appers at boot screen n in games too..

i just switched to kyrillos 10.3, but like 10.2 here also white screen appers at boot nd gangstar(game) is also coming in full white.. same game was good in v10 final please help me...i m using chainfire 3d with qualcomm
 
ASakovoy

ASakovoy

Senior Member
Jan 29, 2011
59
1
Hello said:
the camera[/B].
The first is that after taking the photo capture instant green leaves (not important):rolleyes:
second problem. the video does not work. (if that is important)::confused:
I play the record button get this message:
We're sorry.
Camcorder activity (in application Camera) is not responding.
force close or wait -----
install a few days ago Kermel Arakmar (and still the same)
Any solution?
Click to expand...
Click to collapse


Ok, the problem of video recording is generally CM7 is a dysfunction at the moment.:(
I hope that developers CM7 and Krillos'rom , find a solution soon.:D
 
A

Anurag TK

New member
May 21, 2012
1
0
Mangalore
Airplane Mode Bug

I'd like to thank you for devoloping 10.4 for G3. I'm able to flash it without any problem and the ROM works fine but once I reboot my G3,the airplane mode cannot be switched off. I tried factory reset and disabling the sim card lock but it does not work out. I had the same problem with Cyanogen 7. Please help me with this.Thank You in advance. :confused:
 
A

AsM0DeUz

Member
Nov 17, 2010
25
0
No Google play installed

I've upgrade my G3 from Kyrillos 9.5 to 10.4 but there is Google Play icon.

I've installed the roms 10.1 and 10.4 with odin. Clean every possible caches and fixed permissions. Till no Google play available.

Time to time (between 2 full reset from CWM) the google play icon appears on the main display but when i try to launch it, it tells it isn't installed ...

Do you have any clue ?

Regards
 
kyrillos13

kyrillos13

Inactive Recognized Developer
Sep 26, 2010
4,279
5,152
Athens
AsM0DeUz said:
I've upgrade my G3 from Kyrillos 9.5 to 10.4 but there is Google Play icon.

I've installed the roms 10.1 and 10.4 with odin. Clean every possible caches and fixed permissions. Till no Google play available.

Time to time (between 2 full reset from CWM) the google play icon appears on the main display but when i try to launch it, it tells it isn't installed ...

Do you have any clue ?

Regards
Click to expand...
Click to collapse

Connect to a wifi network for a while.
 
  • Like
Reactions: VAMGDroidFan
V

vivek77

New member
May 13, 2012
3
0
Navi Mumbai
AsM0DeUz said:
I've upgrade my G3 from Kyrillos 9.5 to 10.4 but there is Google Play icon.

I've installed the roms 10.1 and 10.4 with odin. Clean every possible caches and fixed permissions. Till no Google play available.

Time to time (between 2 full reset from CWM) the google play icon appears on the main display but when i try to launch it, it tells it isn't installed ...

Do you have any clue ?

Regards
Click to expand...
Click to collapse

Install Gapps From Recovery Mod Search it on google
 
A

AsM0DeUz

Member
Nov 17, 2010
25
0
Google services don't sync ...

kyrillos13 said:
Connect to a wifi network for a while.
Click to expand...
Click to collapse

:D It worked ! Google Play logo appeared !

Unfortunately, i've another problem, I've added my gmail account and Google Play works but :

- Gmail software wasn't installed, i've installed it through the market but none of Google services sync :confused:

No mail, no calendar (i've a message that i've no calendar in Calendar App) and no contacts sync with gmail...
 
You must log in or register to reply here.

Similar threads

G
  • Sticky
Samsung Galaxy 3 Questions & Answers / FAQ
Replies
599
Views
106K
B
Blackyx007
hillbeast
[OFFICIAL] Kyorarom Q&A and Bug Report Thread
Replies
271
Views
35K
Stanislaus
Stanislaus
Michał12
☆☆☆ [Official] M12-ROM - Problems, Q&A ☆☆☆
Replies
53
Views
13K
xda Santhosh
xda Santhosh
F
Problem With ROOT EXPLORER! Please Help!
Replies
14
Views
47K
darkreset
darkreset
V
[Q] Android App to download Videos (not just You Tube)!!
Replies
30
Views
134K
T
therondawg

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 42
    kyrillos13
    kyrillos13
    Hello to all :)

    Too many people don't have enough posts to post on my rom's thread.
    So i decided to created a new thread in general!

    Here you can post your problems or ask something you dont understand for the flashing process etc.
    Will be posted flashing info and known flashing problems here soon.

    So feel free to post your question, or report a bug! :)



    1. How to flash Kyrillos' rom?

    - Instructions: Here



    2. I just flashed Kyrillos' rom and after flashing the phone bootloops (it plays the same boot sound again and again).

    - You havent done a Wipe data/factory reset in Recovery mode. Remove the battery & re-insert it, go into recovery mode (Vol up + Vol down + home + power), and select the Wipe data/factory reset option. Click yes, and reboot.



    3. The phone booted but my sd partition isnt working. What should i do?

    - Firstly you have to ensure that you put the Hybrid Data2SD files in your sdcard. They are contained in v8.0 rom you downloaded. You can also download them from here. You must put the four files (data2sd.dirs, fs.data2sd, multiosdata, multiosdata.cache) in /sdcard/Android/data/G3mod/*. Then reboot your phone and your partition should work.



    4. I partitioned my sdcard but i dont see the free sdcard (a2sd) space in Titanium Backup.

    - Hybrid Data2SD doesnt show up in Titanium Backup. Its normal :) Fixed



    5. After restoring my backup with Titanium Backup, i dont see all my apps in Android Market.

    - Go in Titanium Backup, find Android Market and wipe Android Market's data. Reboot your phone, and it should be ok.



    6. I have too much lag!

    - Make sure that you dont have more than 50 User Apps installed in your phone.

    - Go in titanium and do a batch operation: Move all apps to internal memory

    - If you have a linux-swap partition in your sdcard, delete it.

    - Go in Settings/Sound and disable all Feedback sounds (leave the haptic feedback checked if you want :p)



    7. I have battery drain issue.

    - Let the battery calibrate itself and after 3-4 days recheck if the problem remains.

    - If your problem isn't fixed and you have installed the Overclocked version, install Setcpu and change the governor to OnDemand or Conservative. You can try to Undervolt/Underclock the cpu too. You should make a screen off profile (83min - 400max) too.

    - If SetCPU is not used, in OC version, CPU frequency is at stable 800MHz, on performance, so there MUST be a battery draining^^
    So, SetCPU is absolute nesassary to be installed and set up. Best working governour is ondemand, if it laggs, drop up threshold in advanced to lower level.



    8. What are the best settings for setcpu? [Updated 25/10/11]

    - Main tab: Min 83Mhz, Max 800-1200MHz, Scaling: Ondemand (or Conservative), Set on boot: Tick
    - Profiles tab: Set on boot: tick
    - Profile (1): In call: 83min, 400max, Scaling: Ondemand, Priority:100
    - Profile (2): Time profile: 1AM - 7AM (here put the time you sleep), min/max 83MHz, Scaling: Powersave, Priority: 99
    - Profile (3): Screen off: 83min, 400max, Scaling: Ondemand, Priority:98
    - Voltages: Try -100mV in all frequencies from 500-1200. If it hangs, try -75mV/-50mV, apply, set on boot: tick



    9. How to enable v6 supercharger?

    - Go in Terminal Emulator, type "su" hit [enter] (you may see a superuser popup, press "Allow", then type "v6_supercharger" hit [enter]
    - Choose scrolling speed "2".
    - It will ask you if you want intergration with init.rc, choose yes (press Y).
    - It will ask you if the home is locked in memory, choose no (Press whatever you want except Y)
    - When you see this: Please enter option 1-30, enter 2 :p
    - Let the rest of the text scroll through. When script finishes, press the home button, then press the power button and reboot the phone.
    - For best results, go in recovery and wipe dalvik-cache and cache.

    Note: You must re-enabled v6_supercharger after kyrillos' rom updates!



    10. I have a partition in my sdcard and each time i try to install an app from market, the phone just reboots!

    - This could be a corrupted filesystem problem. Make a backup d repartition your sd.

    - Wipe data/factory reset.



    11. I really miss some removed apps. Where can i find them & how to install them?

    - You can find any app you want in this thread [By Dharam]

    - To install an app, you must put it in /system/app/. There are many ways to do that.

    - a) Copy the app you want to install in your sdcard. Use an app, which called root explorer. Open it, find the app you want, copy it, navigate to /system/app/, press the Mount R/W button on the top-right of your screen once, the click paste. Reboot your phone.

    - b) You must know how to use adb. adb push appname.apk /system/app/



    12. Kies isn't working.

    - I highly recommend you to stop using Kies and start using Titanium Backup!

    - Anyway, to get it working you must download this and this app and put it in /system/app/



    13. How much left data space is normal to have after i install Kyrillos' rom?

    - If you dont have partition in your sdcard: ~112MB
    - If you have partition in your sdcard: ~150+MB



    14. Gps isn't working.

    - The gps in our phone isnt the best. I did try to make it better and for many users i did succeed.



    15. I have partition in my sdcard but internal storage is still 200MB instead of eg. 1200MB (if partition => 1GB)

    - Its normal. Your partition works as it should, but its not full data2sd, and thats the reason that it doesnt show 1200MB.



    16. One of my apps cant start because it detects that i have adblock on my phone.

    - Download Adfree Android from Android Market, open it and click "Revert"



    17. When i sent messages in Arabic it displays ??? ? ? ???? ??? ???

    - Go in messaging settings => Input Mode: and change it to Automatic or Unicode



    18. I want to set an mp3 file as ringtone or notification sound. What should i do?

    - Make a "media" folder in your sdcard. Inside it make an "audio" folder and then make a "ringtones" or "notifications" folder and place the mp3. Reboot and select it from settings :)



    19. The order of the messages is fu**ed up. How to fix it?

    - Go to Settings => Date and Time. Untick "Automatic" and et the correct Time Zone!



    20. Sometimes i see squares instead of letters.

    - It happens because the Ubuntu font. Download android fonts from v9.0_extras if you cant live with it :p



    21. What about themes? How can i know if a theme is compatible with kyrillos rom?

    - Firstly, you have to check it it supports nine lockscreen. (If it doesnt, contact the developer of the theme and ask him to enable his theme 9 lockscreen support)

    - You can replace any if the theme files EXCEPT: Settings.apk, android.policy.jar, framework.jar, services.jar. If you do replace any if those, your phone will bootloop.

    - Enjoy the theme :p



    22. What is Chainfire3D? How to configure it? (Use version v2.8)

    - Info: Chainfire3D is an intermediary OpenGL driver. What does that mean? It means that Chainfire3D sits between your apps and the graphics drivers, and can intercept and/or change commands between the two. It has some built-in functions, and can be further extended with plugins to provide extra functionality. (More info: http://xdaforums.com/showthread.php?t=1087427)

    - With Kyrillos' rom v9 + Chainfire3D you can play some 3d games, or play some games better than before & without white textures.

    - Chainfire3D installation: Ensure that you have Kyrillos' rom v9 OC. Download Chainfire3D Free or Chainfire3D Pro, run it, accept the su permissions. Press "CF3D driver", and then press "Install". The phone will reboot in a few seconds/minutes.

    - Plugin installation: When it boots up, download the plugins (search for Chainfire3D plugins on google. Plugins: libGLEMU_NVIDIA.so, libGLEMU_POWERVR.so, libGLEMU_QUALCOMM.so), put the in your sdcard and open the app. Press "Install Plugins and Shaders". The app will search your phone to see if there is any plugin available in your sd. Install all the three plugins. Go back to the main app menu.

    - Configure Chainfire3D: In the main app menu, press "Default OpelGL settings". Select the option "Reduce texture quality", and then choose plugin by pressing "Use plugin". There are 3 choices: Powervr, Qualcomm & Nvidia.

    - Test the plugins: Select the "Powervr" plugin and run the game you want. Run it for a minute. Then close the game and change the plugin to "Qualcomm" and run the game for a minute. Compare which plugin worked best (if it worked) and enjoy the game. Note: Nvidia games require Nvidia plugin.



    23. Most of the apps are being installed in sdcard instead of internal/partition. How can i change the default app install location to internal?

    - Open terminal amulator

    - Type:
    su (enter)
    pm setInstallLocation 1 (enter)

    - Done :p [Info: 0 (Auto), 1 (Internal), 2 (External). You can see the current state by typing "pm getInstallLocation".]



    24. How to convert my sdext partition from ext3 to ext4?

    - Download KMapp from here: http://xdaforums.com/showthread.php?t=1301697

    - Install it and run it. Accept the superuser permissions and press the menu button. Select "Filesystem Conversion". Scroll down and select Sdext => ext4 and click "Convert".


    25. What is Mobile Tracker and how to set it up? (Highly recommended // Enabled it in case you lose your phone) (for Kyrillos rom v9.4+)

    - The Samsung Galaxy 3 comes with a mobile tracker software by default which is not activated, as you need to register your phone and account with the Samsung online website. Only then the option works and your phone goes more safer, as the Mobile tracker is one of the best options to use when your phone is stolen or lost.
    The Samsung Dive mobile tracker is something that helps you remotely work on your phone when it is stolen. The online website of its helps you in remotely swiping the phone and delete delete your private data. Though this service is not available in India, a few features of its work, like prompt SMS sending when the phone is used with any new SIM than that which was used to register with the mobile tracker. The app also helps in getting the location information of the phone.

    - How to set it up (source):

    α. Go to Applications => Settings section in the phone. Select Location and Security tab in it.

    β. Scroll down in the menu in Location and Security, and you will see a section for Mobile tracker. Here you need to hit the “Set Mobile Tracker” option which will set the mobile tracker recipient and control the remote phone that is activated. It will take you through the process of registration and set-up of the mobile tracker.

    γ. The first thing you need to set is the mobile tracker password which would be asked to you or anyone who changes the SIM in the phone. It has to be of 8 digits and all numeric characters in it. You need to remember this password for always, as it can get your phone locked if you forget it and type the wrong password multiple times.

    δ. After you set the password, you need to add recipients to whom the phone sends an SMS from the new SIM to notify/alert them about the changes made in the phone.

    ε. Set the information of the sender, i.e. the Sender name and the message to be sent to the recipient. And then agree to the terms.

    στ. Login through your Samsung account, and if you have not registered to it, you can do that for free online by registering the product. And then you would be directed to the mobile tracker settings where you can change any recipient or make changes in the samsung account.

    ζ. After everything is setup, go back to the Settings section, and into the Location and Security section. There you have to check the “Mobile Tracker” option, so that it is activated.

    Note: If at all you have reset your phone through the factory reset option, all the information in the Mobile tracker is lost. You need to set it all over again.

    - Now if you lose your phone or somebody stole it, you can track it and/or lock it and/or wipe all your private data in SamsungDive.






    Copyright 2011© All Rights Reserved, Kyrillos13 :)
    View
    3
    kyrillos13
    kyrillos13
    Reserved for future use :D
    View
    3
    kyrillos13
    kyrillos13
    Reserved for future use xD
    View
    3
    kyrillos13
    kyrillos13
    Johnnyled said:
    I have exactly the same problem.
    Click to expand...
    Click to collapse

    Miquene said:
    I have a problem when flashing to version 9.7. And, when I put the 16gb micro sd card, freezes, and I have to restart forced reloads and when I do the same thing again, it freezes. I tried to remove the micro sd and the phone works fine, but this never happened with version 9.6, only with 9.7. I've proven to format, wipe, I have done everything and still doing the same in version 9.7 and android freezes and reboot again. Any suggestions?
    Click to expand...
    Click to collapse

    Hmm. Flash v9.7.1 update and then change the kernel to fugumod. You will find the version you want in here http://xdaforums.com/showpost.php?p=11407369&postcount=2
    Give me feedback after the try :)
    View
    2
    dhirend_6d
    dhirend_6d
    urb4n said:
    I know there's already an app2sd script included, but as far as I know there are, I think, 3 versions, and the v3 is supposed to work best with class6+ sdcards. I just want to know which version comes with rom.

    Anyway, I'll wait for the 7.5, and then get cracking with partitioning, now I just scout for tips and clues ;)
    Click to expand...
    Click to collapse
    Version 2........ Having a class 10 SD card, you can go for data2sd also. Download G3Mod app and enable data2sd.

    ---------- Post added at 09:29 PM ---------- Previous post was at 09:24 PM ----------
    urb4n said:
    Hi, I've been using Kyrillos rom since 6.0 and I find it very suitable for my needs, in other words- great work ;)

    Nevertheless I've got some questions:
    1. app2sd script - to be honest I rarely used it before 'cos I had only 1gb card. Now I own 8gb class 10 sdcard, do I have to install other script or something like that? What partition size do I need?
    2. Swype- I like the new swype app (I mean the one present in, for example, in 7.0) for its swiftness and speed, but the lack of polish language makes it a little bit less worthy for me. Is there a way to add that language, or it's not up to you in this moment?
    3. Supercharger script- well I've read the instructions for it, but it just made it more confusing... How that exactly work? And what exactly do right after the flashing to make it work properly?

    Sorry for my weird English, but I didn't have many occasions to use it in writing lately ;)
    Click to expand...
    Click to collapse

    1) 512 MB ext4 and 128 M Linux Swap in SD card. Script is included in the ROM.
    2) Not supported at the moment. You can try to add it yourself or flash the update.zip from OTA app.
    3) Run the script and select option Balanced 2 or Balanced 3. Goto /system/etc/init.d/ using root explorer and rename 99_Supercharger to S99_Spuercharger. Reboot. I suggest wait for 7.5 rather than doing this.

    ---------- Post added at 09:31 PM ---------- Previous post was at 09:29 PM ----------
    foxct2005 said:
    In my 7.1 no OC Rom, with 15 applications installed, I get "Full memory".
    I have NO partition in my SD, because my sd is class 4 and get more slowly when I use ext4 for apps2sd.
    In System Options, I see 16 Mb of free memory for applications, but i can't install anything. I tried to uninstall some applications to make free space for new application, but without success.

    Please How resolve my problem ?

    Best regards.
    Click to expand...
    Click to collapse

    Flash latest G3Mod kernel. It has compcache enabled.
    View

New posts