.:Finally!!! AUSTRALIAN FIRMWARE:. added LA6 modem

Search This thread

prana_Sky

Senior Member
Aug 21, 2010
579
104
Melbourne
Yes we are not ghosts anymore!

2.3.6 2012 January N7000XSAKL1

OZZy Firmware..... courtesy of samfirmware.com

N7000XXLA6
N7000XSAKL1
XSA

shared Link..http://hotfile.com/dl/151052544/1c6c3a7/N7000XXLA6_N7000XSAKL1_XSA.zip.html


ADDED: CWM Flashable .zip LA6 MODEM for ANY ROM

-Just put file on sd card
-enter into recovery
-flash zip file
-thats it. enjoy

sorry guys the modem below is actually XXLA4 I named the file wrongly.
 
Last edited:

dr.ketan

Recognized Developer / Recognized Contributor
shared Link..http://hotfile.com/dl/151052544/1c6c3a7/N7000XXLA6_N7000XSAKL1_XSA.zip.html

Haven't tried it yet but I'm guessing this may work for ROOT until chainfire releases new one ..
http://download.chainfire.eu/70/CF-Root/SGN/CF-Root-SGN_DX_XSP_KL1-v5.0-CWM5.zip
Try and let us know



This root won't work directly.
So better remove it from OP, otherwise newbie waste unnecessary time for this.
Otherwise write complete procedure how to do it.
here I am describing in short
-First get rootable ROM
-Get root with attached file
-Use CWM to update attached N7000XSAKL1 ROM.
 
Last edited:
  • Like
Reactions: jeromepearce

jeromepearce

Senior Member
Jun 7, 2007
752
159
Mackay
www.processmapping.com.au
This root won't work directly.
So better remove it from OP, otherwise newbie waste unnecessary time for this.
Otherwise write complete procedure how to do it.
here I am describing in short
-First get rootable ROM
-Get root with attached file
-Use CWM to update attached N7000XSAKL1 ROM.

So if I have a rooted stock ROM and CWM, I should be able to flash the ROM found at
http://hotfile.com/dl/151052544/1c6c3a7/N7000XXLA6_N7000XSAKL1_XSA.zip.html
using CWM and I will still have Root?

---------- Post added at 10:12 AM ---------- Previous post was at 10:08 AM ----------

I can't find any details of this ROM version here. Can anyone tell me what is good (or even bad?) about this update? I hate updating for the sake of it.
 

prana_Sky

Senior Member
Aug 21, 2010
579
104
Melbourne
ended up flashing last night all is good. if your in Au then you should now have a modem that uses less batt and quicker response to the networks.

I have noticed for me the internet loading speed is fast, and my battery from 6 hours has used 4% without use. Now that friggin good
 

mustang2012

Senior Member
Jan 10, 2012
441
79
ended up flashing last night all is good. if your in Au then you should now have a modem that uses less batt and quicker response to the networks.

I have noticed for me the internet loading speed is fast, and my battery from 6 hours has used 4% without use. Now that friggin good

Have you managed to root as well??
 

bamboo12

Senior Member
Aug 2, 2010
259
25
can someone extract the modem file, hotfile takes ages to download the whole thing
 

mali019

Senior Member
May 17, 2010
89
11
Sydney
I installed this rom today. So far so good. I'll test the battery life and see how it goes. The chainfire root for N7000XXLA6 works on this rom. I have no problems with the root.
 

dr.ketan

Recognized Developer / Recognized Contributor
So if I have a rooted stock ROM and CWM, I should be able to flash the ROM found at
http://hotfile.com/dl/151052544/1c6c3a7/N7000XXLA6_N7000XSAKL1_XSA.zip.html
using CWM and I will still have Root?

---------- Post added at 10:12 AM ---------- Previous post was at 10:08 AM ----------

I can't find any details of this ROM version here. Can anyone tell me what is good (or even bad?) about this update? I hate updating for the sake of it.

Yes you can flash it with CWM, you have to select 'keep CF root' when prompt, to keep root intact.
Remember, you need to place extracted ROM file, in firmware folder of Ext Memory card. N from CWM, you have to select'Flash stock ROM'
 

senectus

Senior Member
Dec 14, 2004
1,324
175
Perth
No idea... Only did it because it was asked for and simple for me to do.

Sent from my GT-N7000 using Tapatalk
 

senectus

Senior Member
Dec 14, 2004
1,324
175
Perth
so to upgrade to this without wipe do I need to copy the whole ZIP to the SD card and point mobile odin pro to it and make sure that CSC is NOT ticked?
 
Last edited:

Top Liked Posts