(ROM)CM7.1(2.3.7)Sapphire32a(NR-6.35.16.19)Sept 30(Unofficial)

Search This thread

carz12

Senior Member
Jan 25, 2010
687
167
Grande Prairie
I Was Helping another member get a rom working for the 6.35 radio sapphire and thought I'd look into making cm7 run better on our new radio magics, I've had it compiling for a long time now but it was slow and laggy and several things were broken. So I concentrated on DietGingerbread.

Well I succeeded this weekend at making it run ok and everything is working as it does on any other cm7 phone install.

It has my 710 kernel with 245/528 as default. (updated kernel, added 352000 to cpu freq table)

You must have 1.76.2007 spl
You should have 6.35.16.19 radio
cwm-carz-v4.0.1.4-0820-recovery, RA's hero recovery on sapphire does not work
install the rom
install gapps (optional)
Custom MTD explained below. (optional)

________
New Sept 30

Fixed merge issue in frameworks/base, fixes settings for lockscreen and a few other quirks
2.3.7 now

cm-7.1.0-09302011-6355Sapphire

________
New Sept 28

Latest cm7 source, a few changes, unlock bubbles are nice
New kernel with many changes, it has great battery life again, only 3% drop overnight now, 40 hours 35 minutes on battery and I have 18% left still, no problems over a weeks use.
Gapps package has the new market now, the old one auto updated to the new one every time for me anyways

Everything is on Andriodspin now, nice fast servers

cm-7.1.0-09262011-6355Sapphire (I didn't wipe and it works perfectly, your mileage my vary)
--------------
Aug 20

2.3.5, CM teams updates merged and tested
New kernel
Updated power profile (not sure if it affects battery or not)
Incall ui off by default, you can enable in settings
Off animation is not on by default anymore, you can turn it on in settings (it's still buggy for me anyways, I need to rewrite the code so it isn't using gles2.0)
Led settings are back (not that a lot of you noticed it gone lol, I didn't notice either)
Many tweaks for more speed, mostly in ADW
Fast enough now that I don't even overclock at all now

I forgot to add, I fixed gles1.1, neocore now works

Finally, here is the update!

cm-7.1.0-08202011-6355Sapphire-signed

This is the gapps you should use, the minimal package that way all is updated and current from the market

gapps-gb-20110613-signed.zip

*Optional*

This is the newest recovery, 4.0.1.4,(in fastboot usb mode: fastboot flash recovery cwm-carz-v4.0.1.4-0820-recovery.img )

cwm-carz-v4.0.1.4-0820-recovery (unzip and use the fastboot binary in the zip to flash, you can not flash the zip from recovery!)

--------------
New July 10 (fixed)

This is the version I have in a post in this thread (over 350 downloads and only one issue so far)
Updated kernel with camera speed improvement (not in the previously posted rom, I'll post an update package for you guys)
Fixed audio issue after taking pictures
Recovery 4.0.0.5

Rom:
CyanogenCARZ-7.1.0-07102011-6355Sapphire-signed (todays build downloaded and tested)
gpsshim replacement for wake issue http://www.multiupload.com/DKOFY5UNR3

Kernel: (update zip for those already running the july version)(not needed for above rom)
carz-2.6.34.4-07072011-signed

Google apps:
gapps_mdpi_gb_20110613_S(go to market and update)

Recovery: (fixes a wipe issue)
carz-clockworkmod-v4.0.0.5-recovery
--------------
June 21

Updated to latest cm/aosp sources, new kernel with updated usb and audio, fastest version yet. Also 4.0.0.2 recovery is working great so far.
Testing reports are good, wipe if you have issues.

CyanogenCARZ-7.1.0-06192011-6355Sapphire-signed

Carz-Clockworkmod-4.0.0.2-recovery

gapps_mdpi_gb_20110307_S

--------------
June 08

A very stable and fast release so far
New kernel with updated usb, tethering and debug notification working now
New recovery (optional)
I did not wipe but I was coming from builds that were only 1 day old, If in doubt wipe and format system.
on off animations may or may not work for you, still looking into it

cm-CyanogenCARZ-7.1.0-06062011-6355Sapphire-signed

This is not needed for anything but testing for you guys, tethering involved rom changes also.

carz-2.6.34.2-06052011-signed (flashable zip with new kernel and modules)(modules are sqf)

Recovery coming, v3.2.0....
--------------
May 23

Many updates from both the cm team and aosp (close to RC I think)
Smoother and more responsive
Updated kernel
If you have any boot issues you have to fully wipe and format system from recovery

update-cm-CyanogenCARZ-7.1.0-05232011-6355Sapphire
MD5SUM: cf815615f72cf5df900e2f8f73b57c5d

Clockworkmod-Carz-recovery-v3.1.0.1-05-23-2011.zip (newest recovery compiled with rom)
--------------
May 14 Consider this a Nightly

No wipe update if coming from may 08 version

update-cm-CyanogenCARZ-7.1.0-05142011-6355Sapphire
p
md5sum 8f3fda6dbb4b47ac3098ab28b3f29181

--------------

May 08 Stable

Sorry about the wait, I had real life work to do, also several things quit working with the cm7.1.0, 2.3.4 update, it's all good now I believe and seems much faster, This is on a clean install without custom mtd that I tested.

update-cm-CyanogenCARZ-7.1.0-05092011-6355Sapphire for mtd use, everything else is the same as the version below

update-cm-CyanogenCARZ-7.1.0-05072011-6355Sapphire
MD5SUM 137e6ec97d0498c5097bce4e42bfe102
I also started compiling clockworkmods recovery with the rom for our devices, it has all the options plus a few I've never seen before.

Clockworkmod-Carz-recovery-v3.0.2.8-05-04-2011

It's a zip with the recovery and the fastboot binary, unzip, cd to directory and:
Code:
fastboot flash recovery Clockworkmod-Carz-recovery-v3.0.2.8-05-04-2011.img

--------------
April 24
You must wipe all for this release, I used google to save settings and apps before wiping and then used it to restore everything, works now on mtd also.

If you use seo's 2.0 recovery (as I do) you have to use fastboot to erase system, as the recovery does not. (I'm looking in to fixing it)
Code:
fastboot erase system -w

Cyanogen-CARZ-7-6355sapphire-signed

Here is a new boot mtd flasher for custom MTD, I fixed cm7 so it doesn't bind data/local/download to cache/download anymore, market fixed for good on MTD

DGB-boot-v1.5.8-CustomMTD_S
(I will have a newer compile out later today with a few changes like the kernel)


--------------
Cyanogen-7-RC4-6355Sapphire
MD5SUM

Cyanogen-7-RC4-6355Sapphire-MTD
--------------
Cyanogen-7-RC3-6355Sapphire

CM7 RC3 carz v03.27.2001.2-MTD
--------------
gapps

Limited support as I'm only pulling in cm teams changes. Enjoy! Big props to all of Cyanogenmods team.

For market to work on AutoMTD for now, open terminal
on phone
Code:
su
cp -a /dev/cache/download /cache
on comp
Code:
adb shell
su
cp -a /dev/cache/download /cache
New Nightlies
--------------
update-cm-CyanogenCARZ-7-04062011-2-NIGHTLY-DS-signed.zip
MD5SUM f005d14bd708403ff92dafba475837ff
update-cm-CyanogenCARZ-7-04062011-2-NIGHTLY-DS-signed-AutoMTD.zip
MD5SUM ce91ba7861de46e9e52bd12c8d39ecb9

I have no long movies, please check and see if they work now

--------------
update-cm-CyanogenCARZ-7-04022011-NIGHTLY-DS-signed.zip
MD5SUM

update-cm-CyanogenCARZ-7-04022011-NIGHTLY-DS-signed-AutoMTD.zip
MD5SUM
--------------
update-cm-Carz2-Cyan-7-04012011-NIGHTLY-signed.zip
MD5SUM

update-cm-Carz2-Cyan-7-04012011-NIGHTLY-signed-AutoMTD.zip
--------------
update-cm-Carz2-Cyan-7-03302011-NIGHTLY-signed.zip
MD5SUM

update-cm-Carz2-Cyan-7-03302011-NIGHTLY-signed-AutoMTD.zip
MD5SUM

Custom MTD: Please know what you are doing here, read and then read some more.
first before anything run this either in term or using adb (only "df" in term)
Code:
adb shell df
you should get something like this
Code:
carz2@carz2-HP-G61-Notebook-PC:~/androidgb/system$ adb shell df
Filesystem           1K-blocks      Used Available Use% Mounted on
tmpfs                    98096        32     98064   0% /dev
tmpfs                    98096         0     98096   0% /mnt/asec
tmpfs                    98096         0     98096   0% /mnt/obb
/dev/block/mtdblock3    174080    [COLOR="Red"]139540[/COLOR]     34540  80% /system
/dev/block/mtdblock5    169728     19832    149896  12% /data
/dev/block/mtdblock4    133120     39968     93152  30% /cache
/dev/block/loop0          1024      1024         0 100% /system/lib/modules
/dev/block/loop1          4352      4352         0 100% /system/xbin
/dev/block/mmcblk0p2    468331      8226    435120   2% /sd-ext
/dev/block/vold/179:1
                       7216340   7148400     67940  99% /mnt/sdcard
/dev/block/vold/179:1
                       7216340   7148400     67940  99% /mnt/secure/asec
look at "/dev/block/mtdblock3 174080 139540 34540 80% /system"
I used "mtd 140 3" in my mtdpartmap.txt
Download DGB-recovery-v1.5.8-CustomMTD_S.zip
These instructions are from firerats thread (recommended reading material) modified a little for my use.
Install Instructions:

Download DGB-recovery-v1.5.8-CustomMTD_S.zip
Create mtdpartmap.txt and put on /sdcard/ (use 140 3) see configuration above or in Firerats thread < recomended
reboot to recovery
nandbackup
wipe (I also "fastboot erase system -w" )
flash DGB-recovery-v1.5.8-CustomMTD_S.zip
reboot to recovery ( reboot and hold Home )
wipe again
Flash any of my custom MTD roms
reboot

For market to work on AutoMTD for now, open terminal
on phone
Code:
su
cp -a /dev/cache/download /cache
on comp
Code:
adb shell
su
cp -a /dev/cache/download /cache
The above is what I did and I'm running fine right now,

Below is with 130 3 mtdpartmap, I trimmed some stuff out
Code:
carz2@carz2-HP-G61-Notebook-PC:~/androidgb/system$ adb shell df
Filesystem           1K-blocks      Used Available Use% Mounted on
tmpfs                    98096        32     98064   0% /dev
tmpfs                    98096         0     98096   0% /mnt/asec
tmpfs                    98096         0     98096   0% /mnt/obb
/dev/block/mtdblock3    133120    131772      1348  99% /system
/dev/block/mtdblock5    340736     83740    256996  25% /data
/dev/block/loop0          1024      1024         0 100% /system/lib/modules
/dev/block/mmcblk0p2    468331     10053    433293   2% /sd-ext
/dev/block/mmcblk0p2    468331     10053    433293   2% /cache
/dev/block/mtdblock4      3072       780      2292  25% /dev/cache
/dev/block/vold/179:1
                       7216340   7138144     78196  99% /mnt/sdcard
/dev/block/vold/179:1
                       7216340   7138144     78196  99% /mnt/secure/asec
169 > 340 on data
 

Attachments

  • cm7linpack.png
    cm7linpack.png
    34.8 KB · Views: 8,110
  • cmparts.png
    cmparts.png
    33 KB · Views: 7,707
  • lockscrn.png
    lockscrn.png
    46.9 KB · Views: 8,172
  • freemem.png
    freemem.png
    35.5 KB · Views: 7,873
Last edited:

Unkjcr

Senior Member
Jul 19, 2010
251
35
Thank you for all your effort. I will test it right away. :)

May i get your permission to post this ROM in other forum? With all the credits and with a link to these thread. Only for promoting purpose. :)
 

Unkjcr

Senior Member
Jul 19, 2010
251
35
So far it works as any other GB ROM out there. But with 2 differences for now: It doesn´t support App2SD (i really hope you enable this feature) and... it´s faster than the others! Great job Carz! :D
 
Last edited:
Apr 27, 2010
30
0
Just installed, replacing GBRider, so far so good, very speedy, everything seems to work.
Excellent work carz, as usual!

---
Update: seems I spoke too fast, the root portion seems to have a problem. SuperUser/Titanium don't work (exception with 'failed running exec() on SU' appear in the log
 
Last edited:

orange_24

Senior Member
Oct 3, 2008
189
10
Reset your phone - it helped me -

carz - rom is very fast like 4 GB2.3 - one qestion, how about battery drain?


Just installed, replacing GBRider, so far so good, very speedy, everything seems to work.
Excellent work carz, as usual!

---
Update: seems I spoke too fast, the root portion seems to have a problem. SuperUser/Titanium don't work (exception with 'failed running exec() on SU' appear in the log
 

Top Liked Posts

  • There are no posts matching your filters.
  • 32
    I Was Helping another member get a rom working for the 6.35 radio sapphire and thought I'd look into making cm7 run better on our new radio magics, I've had it compiling for a long time now but it was slow and laggy and several things were broken. So I concentrated on DietGingerbread.

    Well I succeeded this weekend at making it run ok and everything is working as it does on any other cm7 phone install.

    It has my 710 kernel with 245/528 as default. (updated kernel, added 352000 to cpu freq table)

    You must have 1.76.2007 spl
    You should have 6.35.16.19 radio
    cwm-carz-v4.0.1.4-0820-recovery, RA's hero recovery on sapphire does not work
    install the rom
    install gapps (optional)
    Custom MTD explained below. (optional)

    ________
    New Sept 30

    Fixed merge issue in frameworks/base, fixes settings for lockscreen and a few other quirks
    2.3.7 now

    cm-7.1.0-09302011-6355Sapphire

    ________
    New Sept 28

    Latest cm7 source, a few changes, unlock bubbles are nice
    New kernel with many changes, it has great battery life again, only 3% drop overnight now, 40 hours 35 minutes on battery and I have 18% left still, no problems over a weeks use.
    Gapps package has the new market now, the old one auto updated to the new one every time for me anyways

    Everything is on Andriodspin now, nice fast servers

    cm-7.1.0-09262011-6355Sapphire (I didn't wipe and it works perfectly, your mileage my vary)
    --------------
    Aug 20

    2.3.5, CM teams updates merged and tested
    New kernel
    Updated power profile (not sure if it affects battery or not)
    Incall ui off by default, you can enable in settings
    Off animation is not on by default anymore, you can turn it on in settings (it's still buggy for me anyways, I need to rewrite the code so it isn't using gles2.0)
    Led settings are back (not that a lot of you noticed it gone lol, I didn't notice either)
    Many tweaks for more speed, mostly in ADW
    Fast enough now that I don't even overclock at all now

    I forgot to add, I fixed gles1.1, neocore now works

    Finally, here is the update!

    cm-7.1.0-08202011-6355Sapphire-signed

    This is the gapps you should use, the minimal package that way all is updated and current from the market

    gapps-gb-20110613-signed.zip

    *Optional*

    This is the newest recovery, 4.0.1.4,(in fastboot usb mode: fastboot flash recovery cwm-carz-v4.0.1.4-0820-recovery.img )

    cwm-carz-v4.0.1.4-0820-recovery (unzip and use the fastboot binary in the zip to flash, you can not flash the zip from recovery!)

    --------------
    New July 10 (fixed)

    This is the version I have in a post in this thread (over 350 downloads and only one issue so far)
    Updated kernel with camera speed improvement (not in the previously posted rom, I'll post an update package for you guys)
    Fixed audio issue after taking pictures
    Recovery 4.0.0.5

    Rom:
    CyanogenCARZ-7.1.0-07102011-6355Sapphire-signed (todays build downloaded and tested)
    gpsshim replacement for wake issue http://www.multiupload.com/DKOFY5UNR3

    Kernel: (update zip for those already running the july version)(not needed for above rom)
    carz-2.6.34.4-07072011-signed

    Google apps:
    gapps_mdpi_gb_20110613_S(go to market and update)

    Recovery: (fixes a wipe issue)
    carz-clockworkmod-v4.0.0.5-recovery
    --------------
    June 21

    Updated to latest cm/aosp sources, new kernel with updated usb and audio, fastest version yet. Also 4.0.0.2 recovery is working great so far.
    Testing reports are good, wipe if you have issues.

    CyanogenCARZ-7.1.0-06192011-6355Sapphire-signed

    Carz-Clockworkmod-4.0.0.2-recovery

    gapps_mdpi_gb_20110307_S

    --------------
    June 08

    A very stable and fast release so far
    New kernel with updated usb, tethering and debug notification working now
    New recovery (optional)
    I did not wipe but I was coming from builds that were only 1 day old, If in doubt wipe and format system.
    on off animations may or may not work for you, still looking into it

    cm-CyanogenCARZ-7.1.0-06062011-6355Sapphire-signed

    This is not needed for anything but testing for you guys, tethering involved rom changes also.

    carz-2.6.34.2-06052011-signed (flashable zip with new kernel and modules)(modules are sqf)

    Recovery coming, v3.2.0....
    --------------
    May 23

    Many updates from both the cm team and aosp (close to RC I think)
    Smoother and more responsive
    Updated kernel
    If you have any boot issues you have to fully wipe and format system from recovery

    update-cm-CyanogenCARZ-7.1.0-05232011-6355Sapphire
    MD5SUM: cf815615f72cf5df900e2f8f73b57c5d

    Clockworkmod-Carz-recovery-v3.1.0.1-05-23-2011.zip (newest recovery compiled with rom)
    --------------
    May 14 Consider this a Nightly

    No wipe update if coming from may 08 version

    update-cm-CyanogenCARZ-7.1.0-05142011-6355Sapphire
    p
    md5sum 8f3fda6dbb4b47ac3098ab28b3f29181

    --------------

    May 08 Stable

    Sorry about the wait, I had real life work to do, also several things quit working with the cm7.1.0, 2.3.4 update, it's all good now I believe and seems much faster, This is on a clean install without custom mtd that I tested.

    update-cm-CyanogenCARZ-7.1.0-05092011-6355Sapphire for mtd use, everything else is the same as the version below

    update-cm-CyanogenCARZ-7.1.0-05072011-6355Sapphire
    MD5SUM 137e6ec97d0498c5097bce4e42bfe102
    I also started compiling clockworkmods recovery with the rom for our devices, it has all the options plus a few I've never seen before.

    Clockworkmod-Carz-recovery-v3.0.2.8-05-04-2011

    It's a zip with the recovery and the fastboot binary, unzip, cd to directory and:
    Code:
    fastboot flash recovery Clockworkmod-Carz-recovery-v3.0.2.8-05-04-2011.img

    --------------
    April 24
    You must wipe all for this release, I used google to save settings and apps before wiping and then used it to restore everything, works now on mtd also.

    If you use seo's 2.0 recovery (as I do) you have to use fastboot to erase system, as the recovery does not. (I'm looking in to fixing it)
    Code:
    fastboot erase system -w

    Cyanogen-CARZ-7-6355sapphire-signed

    Here is a new boot mtd flasher for custom MTD, I fixed cm7 so it doesn't bind data/local/download to cache/download anymore, market fixed for good on MTD

    DGB-boot-v1.5.8-CustomMTD_S
    (I will have a newer compile out later today with a few changes like the kernel)


    --------------
    Cyanogen-7-RC4-6355Sapphire
    MD5SUM

    Cyanogen-7-RC4-6355Sapphire-MTD
    --------------
    Cyanogen-7-RC3-6355Sapphire

    CM7 RC3 carz v03.27.2001.2-MTD
    --------------
    gapps

    Limited support as I'm only pulling in cm teams changes. Enjoy! Big props to all of Cyanogenmods team.

    For market to work on AutoMTD for now, open terminal
    on phone
    Code:
    su
    cp -a /dev/cache/download /cache
    on comp
    Code:
    adb shell
    su
    cp -a /dev/cache/download /cache
    New Nightlies
    --------------
    update-cm-CyanogenCARZ-7-04062011-2-NIGHTLY-DS-signed.zip
    MD5SUM f005d14bd708403ff92dafba475837ff
    update-cm-CyanogenCARZ-7-04062011-2-NIGHTLY-DS-signed-AutoMTD.zip
    MD5SUM ce91ba7861de46e9e52bd12c8d39ecb9

    I have no long movies, please check and see if they work now

    --------------
    update-cm-CyanogenCARZ-7-04022011-NIGHTLY-DS-signed.zip
    MD5SUM

    update-cm-CyanogenCARZ-7-04022011-NIGHTLY-DS-signed-AutoMTD.zip
    MD5SUM
    --------------
    update-cm-Carz2-Cyan-7-04012011-NIGHTLY-signed.zip
    MD5SUM

    update-cm-Carz2-Cyan-7-04012011-NIGHTLY-signed-AutoMTD.zip
    --------------
    update-cm-Carz2-Cyan-7-03302011-NIGHTLY-signed.zip
    MD5SUM

    update-cm-Carz2-Cyan-7-03302011-NIGHTLY-signed-AutoMTD.zip
    MD5SUM

    Custom MTD: Please know what you are doing here, read and then read some more.
    first before anything run this either in term or using adb (only "df" in term)
    Code:
    adb shell df
    you should get something like this
    Code:
    carz2@carz2-HP-G61-Notebook-PC:~/androidgb/system$ adb shell df
    Filesystem           1K-blocks      Used Available Use% Mounted on
    tmpfs                    98096        32     98064   0% /dev
    tmpfs                    98096         0     98096   0% /mnt/asec
    tmpfs                    98096         0     98096   0% /mnt/obb
    /dev/block/mtdblock3    174080    [COLOR="Red"]139540[/COLOR]     34540  80% /system
    /dev/block/mtdblock5    169728     19832    149896  12% /data
    /dev/block/mtdblock4    133120     39968     93152  30% /cache
    /dev/block/loop0          1024      1024         0 100% /system/lib/modules
    /dev/block/loop1          4352      4352         0 100% /system/xbin
    /dev/block/mmcblk0p2    468331      8226    435120   2% /sd-ext
    /dev/block/vold/179:1
                           7216340   7148400     67940  99% /mnt/sdcard
    /dev/block/vold/179:1
                           7216340   7148400     67940  99% /mnt/secure/asec
    look at "/dev/block/mtdblock3 174080 139540 34540 80% /system"
    I used "mtd 140 3" in my mtdpartmap.txt
    Download DGB-recovery-v1.5.8-CustomMTD_S.zip
    These instructions are from firerats thread (recommended reading material) modified a little for my use.
    Install Instructions:

    Download DGB-recovery-v1.5.8-CustomMTD_S.zip
    Create mtdpartmap.txt and put on /sdcard/ (use 140 3) see configuration above or in Firerats thread < recomended
    reboot to recovery
    nandbackup
    wipe (I also "fastboot erase system -w" )
    flash DGB-recovery-v1.5.8-CustomMTD_S.zip
    reboot to recovery ( reboot and hold Home )
    wipe again
    Flash any of my custom MTD roms
    reboot

    For market to work on AutoMTD for now, open terminal
    on phone
    Code:
    su
    cp -a /dev/cache/download /cache
    on comp
    Code:
    adb shell
    su
    cp -a /dev/cache/download /cache
    The above is what I did and I'm running fine right now,

    Below is with 130 3 mtdpartmap, I trimmed some stuff out
    Code:
    carz2@carz2-HP-G61-Notebook-PC:~/androidgb/system$ adb shell df
    Filesystem           1K-blocks      Used Available Use% Mounted on
    tmpfs                    98096        32     98064   0% /dev
    tmpfs                    98096         0     98096   0% /mnt/asec
    tmpfs                    98096         0     98096   0% /mnt/obb
    /dev/block/mtdblock3    133120    131772      1348  99% /system
    /dev/block/mtdblock5    340736     83740    256996  25% /data
    /dev/block/loop0          1024      1024         0 100% /system/lib/modules
    /dev/block/mmcblk0p2    468331     10053    433293   2% /sd-ext
    /dev/block/mmcblk0p2    468331     10053    433293   2% /cache
    /dev/block/mtdblock4      3072       780      2292  25% /dev/cache
    /dev/block/vold/179:1
                           7216340   7138144     78196  99% /mnt/sdcard
    /dev/block/vold/179:1
                           7216340   7138144     78196  99% /mnt/secure/asec
    169 > 340 on data
    5
    Ok, all fixed up and posted to the OP, no wipe needed
    4
    The reason the assert is there in the first place is so no phones get screwed up, if you really want to install without the required prerequisites you can remove the assert completely from the updater script in the rom.

    I've had koush's recovery compiling with my rom since the beginning , it works great, I have posted several versions in the OP of this thread, they all work.

    Here is the latest http://www.multiupload.com/5NS5Z5EKG9

    I'm also ready to update the OP with the latest rom, all the requests since the 13th are done, led notification settings are back, in call ui is off by default and can be enabled in settings, I also changed the power profile to match the new kernel better and a new updated kernel with less jumps in frequency.

    CM has slowed a bit in updates so I was able to concentrate on my fixes. Even I am happy with it now, and I'm my worse critic, I'm an anal mofo lol.

    Edit: I'm going to upload, then download and md5 and then install to make sure no more corruption of files is happening on upload
    3
    New build is up, new kernel is included, no wipe is needed. I also changed the gapps link to the latest from CM.

    Yes I'm going to keep Diet updated, this has taken my time the last few days though.

    Also lol at people wanting a port to old radio, it was a very short time ago that it was the other way around.
    3
    Ok, I don't know whats going on but it failed for me, I'll upload again

    here it is, this one passed no problems, http://www.multiupload.com/CXX8M1UQBG