[SGH-T999] CF-Auto-Root

Search This thread

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,452
87,862
www.chainfire.eu
Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

Donate
CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

What's installed
- SuperSU binary and APK
- Stock recovery

Installation and usage
Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

Not included - Triangle Away
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

Not included - adbd Insecure
As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

CF-Auto-Root homepage
http://autoroot.chainfire.eu/

CF-Auto-Root main thread
[CENTRAL] CF-Auto-Root
For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

No CWM and such ?
I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.
 
Last edited:

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,452
87,862
www.chainfire.eu
ODIN Installation (detailed)

- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.
 

Attachments

  • Odin3-v1.85.zip
    198.6 KB · Views: 10,275
Last edited:

jhenderson81

Member
May 2, 2012
46
9
Phoenix
Wow this should make it very easy to root for some. I appreciate the idea of straying away from custom recoveries and just using Odin. That is the safest bet. With all the problems with partitions being messed up etc. It's a great idea. I'm a crackflasher so I appreciate my backups.... and being untethered.

Sent from my SGH-T999 using xda premium
 
  • Like
Reactions: RBSuare

DocHoliday77

Senior Member
May 10, 2011
9,403
6,892
HuntsVegas!!!
This is Awesome!
Thanks for bringing this over for us!

You can never have too many CF-apps!!! :good:

BTW, Mobile Odin is easily the most useful app I have!
Thank you for all of your work!
 
  • Like
Reactions: RBSuare

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,452
87,862
www.chainfire.eu
I have updated all the CF-Auto-Root downloads. The scripts have been slightly improved, the roboto font is now used, and SuperSU has been updated to v0.98 !

There is no need to flash the updated version if you are currently successfully rooted (you'll have gotten the latest SuperSU from Google Play updates already).
 

tdizzle404

Senior Member
Nov 27, 2010
4,653
1,102
North Georgia
I have updated all the CF-Auto-Root downloads. The scripts have been slightly improved, the roboto font is now used, and SuperSU has been updated to v0.98 !

There is no need to flash the updated version if you are currently successfully rooted (you'll have gotten the latest SuperSU from Google Play updates already).

Thanks for your support to our device.

Sent from my SGH-T999 using xda premium
 
  • Like
Reactions: ochatch and RBSuare

scrim

Member
Oct 6, 2007
14
1
Chicago
Thanks!

This worked perfectly, thank you so much. Since this was a free app and I bought the SuperSU Pro version to say thanks :)
 
  • Like
Reactions: RBSuare

psykhotic

Senior Member
Aug 22, 2012
1,121
181
Root in under a minute, why is this not pinned?? I was having some issues with WiFi calling so I ODIN'd back to ICS and it resolved them. Did the OTA update to JB from Tmo's servers but was missing root horribly. Can't believe how easy it was.
 
  • Like
Reactions: RBSuare

bobolinko

Senior Member
Nov 5, 2010
338
64
Everett WA
Thank You Chainfire

This worked perfectly, thank you so much. Since this was a free app and I bought the SuperSU Pro version to say thanks :)

Ditto on the Thank You,
I got the older version of Root and bought the Odin Pro for a thank you to Chainfire!
As we all KNOW, Chainfire Rocks! Props to him man, Major Props!
Aloha from Hawaii
 

Idyar

Senior Member
Nov 14, 2012
566
386
Toronto
Just used on the Stock Canadian JB update and as everything else chainfire does worked perfectly. Absolutely amazing work, I have tried to buy the pro version of all your software is that better then directly donating?

You rock, saved me a massive headache rooting 3 guys at work phones!
 

R2142

Senior Member
Sep 29, 2011
80
10
Oak Harbor, WA
Chainfire Always comes through with the best gear. Everytime I need something from Chainfire, I always buy it. My way of saying thanks.

R2142
 

Araltd

Senior Member
Jan 30, 2010
1,477
626
USA
Rooted my S3 in about 27 seconds from start to finish. Wow, pretty simple.

Now what I'm understanding is you guys are suggesting NOT to install a CWM or TWRP recovery? and just flash the roms from Odin?

---------- Post added at 10:51 PM ---------- Previous post was at 10:07 PM ----------

Sorry quick question: I know you don't support custom recovery modes like CMW and TWRP, and I notice CF AUTO ROOT flashes stock recovery... so as a noob, am I to understand that correctly, if I were to install TWRP (for example) and decide its not for me or simply want to go back to stock recovery, I could simple re-run CF AUTO ROOT? and it would re-write the stock recovery mode?
 

LoopDoGG79

Senior Member
Feb 26, 2012
6,459
1,347
Modesto, Cali
Should Auto Reboot be checked in Odin? Its checked by default and it is not mentioned to uncheck it unless one runs into problems.

Sent from my SGH-T999 using xda premium
 

unk2009

Senior Member
Jul 22, 2009
986
278
New York(Hudson Valley)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)

- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

You may now optionally want to install and run Triangle Away to reset the flash counter.

Thank you Chainfire

Sent from my SGH-T999 using xda premium
 

ticojpunk

Senior Member
Aug 29, 2011
608
236
New City, NY
Just used this method to root a brand new T999. Fresh out of the box I did the OTA update to Jellybean, checked it out for a few hours as-is, then just rooted it now. I have Titanium Backup installed and I'm already freezing bloatware. Thanks so much for this method! Worked fantastic. Chainfire rules, but you all know that already.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 84
    Check your device model ! Settings -> About device -> Model number. See the third post for exact supported model numbers. If your device is a totally different model, it will not work (may even brick) !



    CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.

    Donate
    CF-Root has been available for many devices and has clocked over 8 million downloads. This is not even counting custom ROMs that already include it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user has donated me $1...

    What's installed
    - SuperSU binary and APK
    - Stock recovery

    Installation and usage
    Flash the CF-Auto-Root package as PDA in ODIN (details on how to do that are in next post), and your device should reboot into a modified recovery (signified by a large red Android logo) and it will install SuperSU for you and restore the stock recovery, and reboot back into Android.

    If you don't get to the red Android logo, boot into recovery manually ("adb reboot recovery", or boot while holding Power+VolUp+Home).

    Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.

    Did you see the red Android logo during rooting, but SuperSU does not appear? This may sometimes occur due to left-over files and settings, however, you can usually install SuperSU from Google Play at this stage and it'll just work.

    Not included - Triangle Away
    Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)

    Not included - adbd Insecure
    As this CF-Root does not include a custom kernel, adb shell does not have root access by default (you can still get it by typing su inside the shell), nor is adb remount supported, nor will adb push and adb pull work on system files. adbd Insecure can be used to remedy this situation. (No idea what this is about ? Don't worry about it !)

    CF-Auto-Root homepage
    http://autoroot.chainfire.eu/

    CF-Auto-Root main thread
    [CENTRAL] CF-Auto-Root
    For requests for new roots and generic discussion - please keep device specific discussion in the thread you are viewing now.

    No CWM and such ?
    I have personally moved away from permanent custom recoveries, and I am no longer supporting them. On newer devices they cause flash counter and OTA flashing issues. If you really want one, others do provide versions of CWM and TWRP for most devices. Personally I just use Mobile ODIN to install ZIPs and Titanium Backup for my backup/restore needs. I do always want root though, and as such I'm still supporting CF-Auto-Root as quick way to root.
    34
    ODIN Installation (detailed)

    - Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
    - Unzip the attached Odin3-vX.X.zip file
    - Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
    - If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
    - (USB) Disconnect your phone from your computer
    - Start Odin3-vX.X.exe
    - Click the PDA button, and select CF-Auto-Root-....tar.md5
    - Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
    - (USB) Connect the phone to your computer
    - Make sure Repartition is NOT checked
    - Click the Start button
    - Wait for Android to boot
    - Done (if it took you more than 30 seconds, you need practise!)

    - NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.

    New to Samsung? Unfamiliar with Odin? Think all the above is a hassle? Get used to it. It's very simple, and us Samsung folk use Odin (or Mobile ODIN ;)) for everything! It's so very very convenient once you get used to it. Notice the 30 second comment above? For experienced users, the entire process indeed takes only 30 seconds!

    You may now optionally want to install and run Triangle Away to reset the flash counter.
    22
    Download

    2013.05.20 --- CF-Auto-Root

    SuperSU: v1.30

    Download:

    SGH-T999: CF-Auto-Root-d2tmo-d2tmo-sght999.zip


    --- History ---
    2013.05.20: SuperSU v1.30
    2013.02.20: SuperSU v1.05
    2012.12.02: SuperSU v0.98
    2012.10.30: SuperSU v0.96
    11
    I have updated all the CF-Auto-Root downloads. The scripts have been slightly improved, the roboto font is now used, and SuperSU has been updated to v0.98 !

    There is no need to flash the updated version if you are currently successfully rooted (you'll have gotten the latest SuperSU from Google Play updates already).
    8
    All CF-Auto-Root's have been updated with SuperSU v1.05 today !