WWARNING:You must Have The Correct Radio and Latest SPL! You can find them here (RADIO MUST BE INSTALLED FIRST) You can find it here
PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!
First A big thanks to Haykuro for providing the system dump of the latest known Hero build. Great contributions from Haykuro always!!! Make sure to thank him!!!
This ROM is based off the latest "HTC" ROM leak 2.83.x.x with tons of mods enjoy!!
DO NOT RUN ANY OTHER APPS2SD APPLICATIONS ON THIS BUILD. YOU WILL BREAK YOUR SYSTEM. THEY ARE NOT NECESSARY BECAUSE THIS ROM WILL DO A2SD AUTOMATICALLY AND BETTER!
NOTES:Swap is linux-swap by default. Edit the user.conf in /system/bin to change swappiness etc. Compcache modules built with the latest source are included if you want compcache or compcache with backing etc. Run sh /system/bin/swap -s to check swap status and other mod values.
JacHEROSki-v2.2 - Experimental A & B
A
-2.6.29.6-jac-ski root@DesertLake-Labs
-BFS 240
-supports MyTouch out of the box!
-MT
-various ramconsole and usb patches
-other things I can't think of
B
-same as A with the 10MB RAM hack (10 extra MB of RAM)
-other things I can't think of
KNOWN ISSUES
-This ROM will auto-mount, so when flashing make sure it isn't plugged into your computer!
-People search still force closes.
JACxHEROSki-v2.1 - Experimental
-2.6.29.6-jac-ski root@DesertLake-Labs
-BFS-211 w/ updated dalvik etc
-fixed reboots (none in 8 hours)
-please note this is an experimental build FAST
-compcache and compcache backing enabled by default
DEFAULT VALUES
memlimit: 32
swappiness: 60
RECOMMENDED VALUES
linux-swap partition = 64MB
JACxHEROSki-v2.0
-New Kernel and Compcache Modules swap_free now working
-removed app scripts as they conflict with BFS
-MT now working!
JACxHEROSki-v1.7r2
-Remixed 1.5/1.6 with the latest 2.83.x.x HTC Hero Dump
-Kept Old Mms.apk
-Removed Plurk related .apk's (I dont like plurk )
-Updated Modules with backing swap bugs fixed
-Updated libs from dump
-Compcache with Backing Swap now on by default instead of Linux-Swap (Still need the 3rd partition for backing swap!)
-added back the ophone dropdown
- Everything else reads as 1.6r2a does
JACxHEROSki-v1.5r2
- Thanks to Haykruo for the 1.79.482.3 Hero Dump .img's
* New 2.6.29 kernel by JAC-Ski w/perf patches
* Enhanced ramdisk with auto EXT2/EXT3/EXT4 A2SD Support!!
* Cyanogens Apps2SD with a2sd ran before user runtime starts
* Includes E2FSProgs for checking and converting Ext filesystems (Thanks Cyanogen!)
* Apps2SD is automatic. All you need is a second partition.
* Supports ext2/ext3/ext4 for Apps2SD
* Squashfs/Cramfs Support
* Linux-Swap is automatic! All you need is a linux-swap partition (32MB~)
* fsck at boot (should stop FS corruption)
* Tweaked frequency scaling options to be more responsive (Thanks Cyanogen!)
* Maximum CPU scaling frequency set to 528MHz
* TCP buffer changes
* PATH variable updates
* Calls to /data/init.rc /system/init.rc
-Latest BusyBox with working Modprobe
-Module updates
-Working Audio/Modified for better speaker/mic clarity
-Shafty's LED fixes on boot (not perfect)
-Auto backlight turned off by default in build.prop
-rwsystem, rosystem for easy remount from terminal (Thanks Soulife!)
-lucid already in /system/bin
-DalvikVM optimized
-Multi-Touch
-Compcache 0.6+ modules included
-Linux-swap support
-swap is controlled via user.conf in /system/bin
-Flash 9
Added Items
added ext2/ext3 tools to /system/bin
added Lucid script to /system/bin
added SDcard placeholder
added Telnet Binary
added BusyBox
added Java.apk (thanks xDan)
added Voice Search
added Wifi tether
added Superuser Binary
added sysctl.conf
added Haykuro's APN list
added HCItool to /system/bin
added Terminal
added EN_US to Locales
Removed Items
removed Learnmore.apk from HTC
removed HTC PCSync
Everything else has a function for someone or another remove via terminal if you dont want Stock etc
PLEASE SUBMIT BUGS HERE http://code.google.com/p/jacheroplus
**********************************************************PLEASE READ BEFORE INSTALLING**********************************************************************
Please use Cyanogen's recovery image it is awesome!
First step for 2.63 is to setup our SDcard...back your stuff up and lets go!
Formatting you SDcard
You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2
You need Recovery image 1.31 to do this folks!
To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!
You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted. DO NOT USE MORE THAN 32MB SWAP!!!
Example for 8GB card (this example plays it safe and will leave a small amount leftover regardless of the 8GB card)
Reboot and enter recovery
Enter console
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7200
mkpartfs primary ext2 7200 7700
mkpartfs primary linux-swap 7700 7732
#print (to verify we have the 3 partitions)
Example for my 4GB card
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 3420
mkpartfs primary ext2 3420 3932
mkpartfs primary linux-swap 3932-3964
Example for a 2GB card playing it safe
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 1200
mkpartfs primary ext2 1200 1700
mkpartfs primary linux-swap 1700-1732
"End?" you need to place the last value for the linux swap eg.3964 for my 4GB card
#print (to verify we have the 3 partitions)
Next we need to "quit" parted and upgrade our ext2 partition to ext3
#upgrade_fs
Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script
For a longer more detailed parted turorial read this
Flashing the ROM
The second part is getting the ROM on our phone
Copy the ROM to you sdcard as update.zip, enter the recovery console via home+power and lets flash, Check ext filesystems first, if it tells you to go to console to manually check do it! After I've repaired the EXT partition or if it didn't need repair I will now wipe and then apply the update and reboot...Done!
See this thread for a FAQ/Walkthrough a forum member created about Hero and installing it on your G1 http://xdaforums.com/showthread.php?t=534461
Configs
****************************************************************************************************************************************************************
DOWNLOADS
JACxHEROSki-v2.2a please give 15 minutes to upload
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.2b please give 15 minutes to upload
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.1
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.0
http://www.justanotherdev.slackdev.com
JACxHEROSki-v1.6r2b & 1.5_to_1.6r2b.zip
http://www.justanotherdev.slackdev.com
JACxHeroSki-v1.5r2 SYM/BIND APPS2SD
http://www.justanotherdev.slackdev.com
All builds can be found here if you don't see the one your looking for linked
http://www.justanotherdev.slackdev.com
http://altepeter.com/justanotherdev/
I would like to thank daproy, JesusFreke, Cyanogen, Haykuro , xDan, Sangeet.003, Twisted Umbrella, db.hates.you, xrevox and everyone else in the android community helping out with this and other ANDROID projects.
I'f you like what I do, please consider donating here
If you like my work visit me at my Twitter.
PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!
First A big thanks to Haykuro for providing the system dump of the latest known Hero build. Great contributions from Haykuro always!!! Make sure to thank him!!!
This ROM is based off the latest "HTC" ROM leak 2.83.x.x with tons of mods enjoy!!
DO NOT RUN ANY OTHER APPS2SD APPLICATIONS ON THIS BUILD. YOU WILL BREAK YOUR SYSTEM. THEY ARE NOT NECESSARY BECAUSE THIS ROM WILL DO A2SD AUTOMATICALLY AND BETTER!
NOTES:Swap is linux-swap by default. Edit the user.conf in /system/bin to change swappiness etc. Compcache modules built with the latest source are included if you want compcache or compcache with backing etc. Run sh /system/bin/swap -s to check swap status and other mod values.
JacHEROSki-v2.2 - Experimental A & B
A
-2.6.29.6-jac-ski root@DesertLake-Labs
-BFS 240
-supports MyTouch out of the box!
-MT
-various ramconsole and usb patches
-other things I can't think of
B
-same as A with the 10MB RAM hack (10 extra MB of RAM)
-other things I can't think of
KNOWN ISSUES
-This ROM will auto-mount, so when flashing make sure it isn't plugged into your computer!
-People search still force closes.
JACxHEROSki-v2.1 - Experimental
-2.6.29.6-jac-ski root@DesertLake-Labs
-BFS-211 w/ updated dalvik etc
-fixed reboots (none in 8 hours)
-please note this is an experimental build FAST
-compcache and compcache backing enabled by default
DEFAULT VALUES
memlimit: 32
swappiness: 60
RECOMMENDED VALUES
linux-swap partition = 64MB
JACxHEROSki-v2.0
-New Kernel and Compcache Modules swap_free now working
-removed app scripts as they conflict with BFS
-MT now working!
JACxHEROSki-v1.7r2
-Remixed 1.5/1.6 with the latest 2.83.x.x HTC Hero Dump
-Kept Old Mms.apk
-Removed Plurk related .apk's (I dont like plurk )
-Updated Modules with backing swap bugs fixed
-Updated libs from dump
-Compcache with Backing Swap now on by default instead of Linux-Swap (Still need the 3rd partition for backing swap!)
-added back the ophone dropdown
- Everything else reads as 1.6r2a does
JACxHEROSki-v1.5r2
- Thanks to Haykruo for the 1.79.482.3 Hero Dump .img's
* New 2.6.29 kernel by JAC-Ski w/perf patches
* Enhanced ramdisk with auto EXT2/EXT3/EXT4 A2SD Support!!
* Cyanogens Apps2SD with a2sd ran before user runtime starts
* Includes E2FSProgs for checking and converting Ext filesystems (Thanks Cyanogen!)
* Apps2SD is automatic. All you need is a second partition.
* Supports ext2/ext3/ext4 for Apps2SD
* Squashfs/Cramfs Support
* Linux-Swap is automatic! All you need is a linux-swap partition (32MB~)
* fsck at boot (should stop FS corruption)
* Tweaked frequency scaling options to be more responsive (Thanks Cyanogen!)
* Maximum CPU scaling frequency set to 528MHz
* TCP buffer changes
* PATH variable updates
* Calls to /data/init.rc /system/init.rc
-Latest BusyBox with working Modprobe
-Module updates
-Working Audio/Modified for better speaker/mic clarity
-Shafty's LED fixes on boot (not perfect)
-Auto backlight turned off by default in build.prop
-rwsystem, rosystem for easy remount from terminal (Thanks Soulife!)
-lucid already in /system/bin
-DalvikVM optimized
-Multi-Touch
-Compcache 0.6+ modules included
-Linux-swap support
-swap is controlled via user.conf in /system/bin
-Flash 9
Added Items
added ext2/ext3 tools to /system/bin
added Lucid script to /system/bin
added SDcard placeholder
added Telnet Binary
added BusyBox
added Java.apk (thanks xDan)
added Voice Search
added Wifi tether
added Superuser Binary
added sysctl.conf
added Haykuro's APN list
added HCItool to /system/bin
added Terminal
added EN_US to Locales
Removed Items
removed Learnmore.apk from HTC
removed HTC PCSync
Everything else has a function for someone or another remove via terminal if you dont want Stock etc
PLEASE SUBMIT BUGS HERE http://code.google.com/p/jacheroplus
**********************************************************PLEASE READ BEFORE INSTALLING**********************************************************************
Please use Cyanogen's recovery image it is awesome!
First step for 2.63 is to setup our SDcard...back your stuff up and lets go!
Formatting you SDcard
You only need to do this once folks..if you already have 3 partitions including linux-swap move to step 2
You need Recovery image 1.31 to do this folks!
To format card SD card with linux-swap WARNING!!! this will reformat you entire SD card!!
You can use the recovery console and parted to format SDcards with 1.31 folks, no more going through hassles you have the tools on you G1!...here is an example of how to do this in recovery console using parted. DO NOT USE MORE THAN 32MB SWAP!!!
Example for 8GB card (this example plays it safe and will leave a small amount leftover regardless of the 8GB card)
Reboot and enter recovery
Enter console
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7200
mkpartfs primary ext2 7200 7700
mkpartfs primary linux-swap 7700 7732
#print (to verify we have the 3 partitions)
Example for my 4GB card
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 3420
mkpartfs primary ext2 3420 3932
mkpartfs primary linux-swap 3932-3964
Example for a 2GB card playing it safe
#parted /dev/block/mmcblk0
#print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 1200
mkpartfs primary ext2 1200 1700
mkpartfs primary linux-swap 1700-1732
"End?" you need to place the last value for the linux swap eg.3964 for my 4GB card
#print (to verify we have the 3 partitions)
Next we need to "quit" parted and upgrade our ext2 partition to ext3
#upgrade_fs
Swap value is set to 30 currently, you can change this by modifying the "echo" value for swappiness in the a2sd.sh script
For a longer more detailed parted turorial read this
Flashing the ROM
The second part is getting the ROM on our phone
Copy the ROM to you sdcard as update.zip, enter the recovery console via home+power and lets flash, Check ext filesystems first, if it tells you to go to console to manually check do it! After I've repaired the EXT partition or if it didn't need repair I will now wipe and then apply the update and reboot...Done!
See this thread for a FAQ/Walkthrough a forum member created about Hero and installing it on your G1 http://xdaforums.com/showthread.php?t=534461
Configs
To use only linux-swap
-set compcache=0
-set cc_backingswap_en=0
-set linux_swap_eanable=1
To use only compcache without backing_swap
-set compcache=1
-set cc_backingswap_en=0
-set linux_swap_eanable=0
-set cc_disksize=32 (32*1024 = 32768kb = 32MB)
-set cc_memlimit=0
To use compcache with backing_swap
-set compcache=1
-set cc_backingswap_en=1
-set linux_swap_eanable=0
-set cc_disksize=0
-set cc_memlimit=8
To use compcache with linux swap
-set compcache=1
-set cc_backingswap_en=0
-set linux_swap_eanable=0
-set cc_disksize=32
-set cc_memlimit=0
-set linux_swap_en=1
originally posted by uwonsum
****************************************************************************************************************************************************************
DOWNLOADS
JACxHEROSki-v2.2a please give 15 minutes to upload
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.2b please give 15 minutes to upload
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.1
http://www.justanotherdev.slackdev.com
JACxHEROSki-v2.0
http://www.justanotherdev.slackdev.com
JACxHEROSki-v1.6r2b & 1.5_to_1.6r2b.zip
http://www.justanotherdev.slackdev.com
JACxHeroSki-v1.5r2 SYM/BIND APPS2SD
http://www.justanotherdev.slackdev.com
All builds can be found here if you don't see the one your looking for linked
http://www.justanotherdev.slackdev.com
http://altepeter.com/justanotherdev/
I would like to thank daproy, JesusFreke, Cyanogen, Haykuro , xDan, Sangeet.003, Twisted Umbrella, db.hates.you, xrevox and everyone else in the android community helping out with this and other ANDROID projects.
I'f you like what I do, please consider donating here
If you like my work visit me at my Twitter.
Last edited: