WARNING! rooting your phone can void your warranty, do so at your own risk.
NOTE: These instructions below assumes you have a brand new phone just out of the box, all settings on default. If the default settings have been altered, please make sure you have the Ractivation Lock turned off in settings/Security or you will get a FAIL! message in Odin. (Thanks to Girn for pointing that out)
Download Kies (for the Drivers) from here http://www.samsung.com/ca/support/model/SM-N900WZKEBWA
If you don't use Kies just uninstall it as soon as the Kies install is complete.
During Kies uninstall it'll ask you if you want to keep the drivers, say yes to keep drivers.
Very Important! for Chainfire's rooting method to work, you must flash this tar via Odin, before you flash TWRP recovery, else it might Fail!
Download Chainfire's package from post #3
Select the file for the SM-N900W8 Canadian version, it includes the Odin and the Tar file to root your Notes 3.
Follow the flashing instructions from Chainfire's post #2
Quick Root Steps:
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot (like 5 seconds)
- Done
Important! make sure you Download TWRP version 2.6.3.2 (or newer) for hltecan models from http://goo.im/devs/OpenRecovery/hltecan
Quick TWRP Steps:
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select openrecovery-twrp-vX.X.x.x-hltecan.tar
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot (like 5 seconds)
- Done
NOTE: These instructions below assumes you have a brand new phone just out of the box, all settings on default. If the default settings have been altered, please make sure you have the Ractivation Lock turned off in settings/Security or you will get a FAIL! message in Odin. (Thanks to Girn for pointing that out)
Download Kies (for the Drivers) from here http://www.samsung.com/ca/support/model/SM-N900WZKEBWA
If you don't use Kies just uninstall it as soon as the Kies install is complete.
During Kies uninstall it'll ask you if you want to keep the drivers, say yes to keep drivers.
Very Important! for Chainfire's rooting method to work, you must flash this tar via Odin, before you flash TWRP recovery, else it might Fail!
Download Chainfire's package from post #3
Select the file for the SM-N900W8 Canadian version, it includes the Odin and the Tar file to root your Notes 3.
Follow the flashing instructions from Chainfire's post #2
Quick Root Steps:
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot (like 5 seconds)
- Done
Important! make sure you Download TWRP version 2.6.3.2 (or newer) for hltecan models from http://goo.im/devs/OpenRecovery/hltecan
Quick TWRP Steps:
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select openrecovery-twrp-vX.X.x.x-hltecan.tar
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot (like 5 seconds)
- Done
Last edited: