Unable to Haz Root (log attached)

Search This thread

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
I got a new x10 from Best Buy Mobile as a loaner phone, running 1.6 on AT&T fresh out of the box. followed the ATT thread to go to 2.1 using flash tool.
I have tried nearly everything to root it, flash tool tells me phone should be rooted after reboot, it isnt, X10root.apk fails, superoneclick fails (maybe adb related & not sure why.. had adb path set up properly and shows device id, but says protocol error?), z4root doesnt even get temp root.

Im on generic 2.1 x10a , this wall all done on my win 7 64 bit laptop. I will try via adb on my computer at work running win xp later today, but the root .apks should have rooted, I dont understand why.

I will post a log for you guys to check out, Im not a n00b, but not an expert either.

I may have the phone for a week or a month, while my other LCD is repaired.
Thanks everyone!

Go for root !
Version: Universal Androot - v1.6.2 beta 5
Detected OS version:7
ls -l /system/etc
-rw-r--r-- root root 461 2011-01-07 06:11 pvextensions.cfg
-rw-r--r-- root root 418 2011-01-07 06:11 iddd.conf
-rw-r--r-- root root 684 2011-01-07 06:11 wiperconfig.xml
-rw-r--r-- root root 1853914 2010-12-15 20:46 dop.iso
drwxr-xr-x root root 2011-01-26 05:16 wifi
-rw-r--r-- root root 1358 2011-01-07 06:11 hw_config.sh
drwxr-xr-x root root 2011-01-26 05:16 firmware
-rw-r--r-- root root 2046 2011-01-07 06:11 bookmarks.xml
drwxr-xr-x root root 2011-01-26 05:16 ppp
-rw-r--r-- root root 8319 2011-01-07 06:11 event-log-tags
-r-xr-x--- root shell 1176 2011-01-07 06:11 init.goldfish.sh
-rw-r--r-- root root 85623 2011-01-07 06:11 NOTICE.html.gz
-rw-r--r-- root root 438 2010-10-08 04:40 apns-conf.xml
-rw-r--r-- root root 8858 2010-11-30 20:14 default-capability.xml
drwxr-xr-x root root 2011-01-26 05:16 semc
-rw-r--r-- root root 197 2011-01-07 06:11 pvasfstreaming.cfg
drwxr-xr-x root root 2011-01-26 05:16 dhcpcd
-rw-r--r-- root root 3396 2011-01-07 06:11 init.es209ra.bt.sh
-rw-r--r-- root root 2 2011-01-07 06:11 DualMicControl.txt
-rw-r--r-- root root 177 2011-01-07 06:11 pvasflocal.cfg
drwxr-xr-x root root 2011-01-26 05:16 security
-r--r----- bluetooth bluetooth 935 2011-01-07 06:11 dbus.conf
drwxr-xr-x root root 2011-01-26 05:16 customization
drwxr-xr-x root root 2011-01-26 05:16 permissions
-rw-r--r-- root root 935 2011-01-07 06:11 gps.conf
-rw-r--r-- root root 458 2011-01-07 06:11 pvplayer.cfg
drwxr-xr-x root root 2011-01-26 05:16 bluez
-rw-r--r-- root root 85 2011-01-07 06:11 01_qcomm_omx.cfg
-rw-r--r-- root root 1462 2011-01-07 06:11 vold.conf
-rw-r--r-- root root 285 2011-01-07 06:11 sensors.conf
-rw-r--r-- root root 25 2011-01-07 06:11 hosts
-rw-r--r-- root root 1804 2011-01-07 06:11 loc_parameter.ini
ls -l /system/bin/reboot
lrwxr-xr-x root shell 2011-01-26 05:17 reboot -> toolbox
cat /proc/sys/kernel/osrelease
2.6.29
getprop ro.product.model
X10a
getprop ro.product.brand
SEMC
getprop ro.product.name
X10a_1234-4820
getprop ro.product.manufacturer
Sony Ericsson
getprop ro.build.product
X10a
ls -l /sqlite_stmt_journals
-rw------- app_96 app_96 1 2011-05-02 08:41 persist.service.adb.enable
-rw------- app_96 app_96 158741 2011-05-02 08:41 Superuser.apk
-rw------- app_96 app_96 26256 2011-05-02 08:41 su
-rw------- app_96 app_96 1001388 2011-05-02 08:41 busybox
-rwxr-xr-x app_96 app_96 19114 2011-05-02 08:40 exploid
lrwxrwxrwx app_96 app_96 2011-05-01 23:35 data -> /proc/sys/kernel/hotplug
-rw-r--r-- app_96 app_96 29 2011-05-02 08:41 hotplug
-rw-rw-rw- app_96 app_96 0 2011-05-02 08:41 loading
-rw------- app_96 app_96 164788 2011-05-01 23:30 com.noshufou.android.su.apk
ls -l /data/local/tmp
opendir failed, Permission denied
ls -l /app-cache
/app-cache: No such file or directory
run mount
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
/dev/block/mtdblock2 /system yaffs2 ro 0 0
/dev/block/mtdblock3 /data yaffs2 rw,nosuid,nodev 0 0
/dev/block/mtdblock1 /cache yaffs2 rw,nosuid,nodev 0 0
DxDrmServerIpc /data/DxDrm/fuse fuse.DxDrmServerIpc rw,nosuid,nodev,user_id=0,group_id=0,allow_other 0 0
/dev/block//vold/179:1 /sdcard vfat rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
run df
/dev: 143500K total, 12K used, 143488K available (block size 4096)
/sqlite_stmt_journals: 4096K total, 1388K used, 2708K available (block size 4096)
/system: 361088K total, 248980K used, 112108K available (block size 4096)
/data: 476160K total, 96052K used, 380108K available (block size 4096)
/cache: 113920K total, 3316K used, 110604K available (block size 4096)
/sdcard: 1913216K total, 368864K used, 1544352K available (block size 16384)
/data/DxDrm/fuse: Permission denied
Preparing Exploit ... :true
Preparing busybox binary ... :true
User selected: Eclair
Preparing Su binary ... :true
Preparing Superuser apk ... :true, resid:2131034118
Preparing root toolkit script ... :true
Trying to get mount point:/data
/dev/block/mtdblock3 /data yaffs2 rw,nosuid,nodev 0 0
Trying to get mount point:/system
/dev/block/mtdblock2 /system yaffs2 ro 0 0
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
mkdir /system/xbin
cat su > /system/xbin/su
chmod 04755 /system/xbin/su
ln -s /system/xbin/su /system/bin/su

mount -o remount,ro -t yaffs2 /dev/block/mtdblock2 /system
mount -o remount,rw,nosuid,nodev -t yaffs2 /dev/block/mtdblock3 /data

mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
rm /system/bin/su
rm /system/xbin/su

Preparing to execute exploit, do chmod
Executing exploit..
cmd: /data/data/com.corner23.android.universalandroot/files/getroot /dev/block/mtdblock3 yaffs2
[*] Android local root exploid (C) The Android Exploid Crew
[*] Modified by shakalaca for various devices
[+] Using basedir=/sqlite_stmt_journals, path=/data/data/com.corner23.android.universalandroot/files/getroot
[+] opening NETLINK_KOBJECT_UEVENT socket
[-] creat: Permission denied
Wifi enabled ...
/sqlite_stmt_journals/rootshell missing ..
/app-cache/rootshell missing ..
/data/local/tmp/rootshell missing ..
Install/Uninstall rootkit: false
ls -l /sqlite_stmt_journals
-rw------- app_96 app_96 1 2011-05-02 08:41 persist.service.adb.enable
-rw------- app_96 app_96 158741 2011-05-02 08:41 Superuser.apk
-rw------- app_96 app_96 26256 2011-05-02 08:41 su
-rw------- app_96 app_96 1001388 2011-05-02 08:41 busybox
-rwxr-xr-x app_96 app_96 19114 2011-05-02 08:40 exploid
lrwxrwxrwx app_96 app_96 2011-05-01 23:35 data -> /proc/sys/kernel/hotplug
-rw-r--r-- app_96 app_96 29 2011-05-02 08:41 hotplug
-rw-rw-rw- app_96 app_96 0 2011-05-02 08:41 loading
-rw------- app_96 app_96 164788 2011-05-01 23:30 com.noshufou.android.su.apk
ls -l /data/local/tmp
opendir failed, Permission denied
ls -l /app-cache
/app-cache: No such file or directory
run mount
rootfs / rootfs ro 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
tmpfs /sqlite_stmt_journals tmpfs rw,size=4096k 0 0
/dev/block/mtdblock2 /system yaffs2 ro 0 0
/dev/block/mtdblock3 /data yaffs2 rw,nosuid,nodev 0 0
/dev/block/mtdblock1 /cache yaffs2 rw,nosuid,nodev 0 0
DxDrmServerIpc /data/DxDrm/fuse fuse.DxDrmServerIpc rw,nosuid,nodev,user_id=0,group_id=0,allow_other 0 0
/dev/block//vold/179:1 /sdcard vfat rw,dirsync,nosuid,nodev,noexec,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
run df
/dev: 143500K total, 12K used, 143488K available (block size 4096)
/sqlite_stmt_journals: 4096K total, 1388K used, 2708K available (block size 4096)
/system: 361088K total, 248980K used, 112108K available (block size 4096)
/data: 476160K total, 96044K used, 380116K available (block size 4096)
/cache: 113920K total, 3316K used, 110604K available (block size 4096)
/sdcard: 1913216K total, 368864K used, 1544352K available (block size 16384)
/data/DxDrm/fuse: Permission denied
 

Attachments

  • UniversalAndroot.txt
    7.7 KB · Views: 9
Last edited:

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
I just want to flash a gingerbread ROM of course, but I will need xrecovery right? which isnt installing without root.

Unless its possible for me to flash a new rooted rom without xrecovery, I uppose that will work although it might be dangerous.

I'll post back as soon as I can.
 
use the latest version of superoneclick and make sure you have USB debugging enabled :)


if you have rooted with flash tool you do not need to do anything else it will be rooted you dont need x10root or other one click apk apps as flash tool rooted your phone :)

test it with a tool that requires root such as adfree or terminal emulator :)
 
  • Like
Reactions: chrisrotolo

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
i already tried the newest SOC, no dice.

ill try the older one too.

I think it may have to do with the drivers, it looks like regular drivers dont work, Im installing the SE developer ones.

but that doesnt really explain why z4root didnt work, and universal androot fails too.

thanks guys. this is killing me.
 
Last edited:
i already tried the newest SOC, no dice.

ill try the older one too.

I think it may have to do with the drivers, it looks like regular drivers dont work, Im installing the SE developer ones.

but that doesnt really explain why z4root didnt work, and universal androot fails too.

thanks guys. this is killing me.

what firmware are you using on your phone(under about phone) !?

and try the 1.5.5 version make sure when you run it you have USB debugging enabled! (under settings /applications/development ) you may also want to make sure you have UNKNOWN SOURCES checked!


z4 and universal will no longer work after the first version of 2.1! so dont bother with those!

you could also try the root tool that comes with the lastest flashtool

make sure when you root you choose 'connect phone' and not mount for usb storage mode!
 
Last edited:

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
2.1-update 1
build 2.1.a.0.435
2.6.29 SEMCUser@SEMCHost #1
x10a

this is beginning to p1ss me off, I think it must be a driver/adb issue, i did the fix for 64 bit, and now Im on xp and still cant connect to daemon when i say adb devices in cmd. I have the latests drivers, maybe i need to install older ones, maybe these have security?

also what are the signfiles.bat ,etc on my sdcard, they look SE signing tools , like they verify signature, etc.

also tried downloading the new rooting method for 2.1, rootme.tar, but server is unavailable.

yahhhhh! this is nuts!
 

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
adb kill-server and start-server work, so I know my adb is ok, I have android sdk installed. path>adb devices **daemon still not runningerror: cannot connect to daemon, so it has to be the phone or the drivers Im guessing. arrghhh!
 

sopdogg

Senior Member
Apr 21, 2009
531
186
Portland
www.youtube.com
Best way to root, install Xrecovery and JIT enable your phone is via Flash Tool. I'm on AT&T too, and found it rather simple.

Follow the guide found here:
http://xdaforums.com/showthread.php?t=1012380

Make sure you have installed java on your computer.
Also, do not mount your SD card. While your phone is on, connect your phone via usb and hit root once your phone is recognized.

I'm not sure if this is necessary for rooting but for flashing purposes you need to connect your phone via pc companion or SEUS. Check to see if you have the latest firmware and set your phone up to flash new firmware. The computer will install flash drivers onto your computer. You don't have to install the latest AT&T firmware if there is one. You just want to have those flash drivers on your PC.

Hope this helps!
 
Last edited:
  • Like
Reactions: chrisrotolo

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
ok, so i was trying to follow the AT&T giude from 1.6 -2.1, which says update then root, should I go back to 1.6 and try universalandroot or z4root, root first, then update? or will I lose root when I update? Thanks guys.

installed PC companion update my driver, but still no adb devices cannot connect to daemon, and SOC 1.5.5 failed

I installed SEUS on my other PC too, didnt seem to change much, drivers were the same.

this is crazy, what should i do guys? use pc companion to repair? go back to 1.6 and try rooting then update??
 
Last edited:

sopdogg

Senior Member
Apr 21, 2009
531
186
Portland
www.youtube.com
Just use flash tool and press root if you just want to root. You don't have to sideload any apps which is blocked by AT&T anyways.

Update to 2.1 in order to install xrecovery. Once done updating, root it afterwards by pressing the root button on flash tool. No need to go back to 1.6 just to root. Just follow the guide and then you can install any rom you want. The Agent got your back.
 
  • Like
Reactions: chrisrotolo

sopdogg

Senior Member
Apr 21, 2009
531
186
Portland
www.youtube.com
Ok, so I re-read your thread. Let me summarize what I know.
1. Flash tool says you have root after your phone rebooted
2. You can not install busybox via flash tool

It might be that your phone is already rooted. If you tried to install busybox or xrecovery through flash tool and have seen that the advanced options are greyed out, it is because you need to press "ask root permissions" and then accept on your phone.

Also check to see if superuser is working correctly, Install Titanium backup to check. Install it from the marketplace open it up. A box should pop up saying "Allow Root Access"?
If so, then you have done it correctly.


I'm not keen with all the coding so I don't know how to read those logs you have noted.

Try pressing root again on flash tool and let it reboot, let me know what you see afterwards.
 
Last edited:
  • Like
Reactions: chrisrotolo

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
TYhanks for the help , I appreciate it guys.
im at my home laptop with win7 64 bit and adb devices shows serial number connected. adb push gives me cannot connect to daemon error, and super one click fails. I have busybox and superuser .apks installed from astro but both not "fully" installed without root. I know how to check for root, and I do not have it even when flashtool tells me I should. Really strange. what is going on??


ok, didnt want to do it, but im going to try the old way, with the 3 .bat files, is this a good idea? wish me luck! (if i can find clearer instructions)

cant go to sony ericsson unlock bootlloader online with IMEI, becuase its a loaner and says invalid IMEI... *double facepalm*!
 
Last edited:

sopdogg

Senior Member
Apr 21, 2009
531
186
Portland
www.youtube.com
I had those same issues with my 64bit windows 7 too. I think it has to do with Java and how adb tools works better with 32 bit. Troubleshooting your computer and phone might be the way to go.

Make sure on your phone you have usb debugging clicked via Settings>applications>Development. Also, just for the hell of it, click unknown sources.

Make sure on your computer, UAC/User Access Controls is turned off. If you recently installed java, reboot your computer.

After reboot, restart cmd and get into your adb folder. Type adb devices. Should show if you have your phone connected/computer recognizes your phone.
 
  • Like
Reactions: chrisrotolo

agentJBM

Senior Member
Nov 30, 2010
1,562
243
Orlando
TYhanks for the help , I appreciate it guys.
im at my home laptop with win7 64 bit and adb devices shows serial number connected. adb push gives me cannot connect to daemon error, and super one click fails. I have busybox and superuser .apks installed from astro but both not "fully" installed without root. I know how to check for root, and I do not have it even when flashtool tells me I should. Really strange. what is going on??


ok, didnt want to do it, but im going to try the old way, with the 3 .bat files, is this a good idea? wish me luck!

Start over with new download of Flash Tool and 2.1.A.0.435 ftf firmware.
 
  • Like
Reactions: chrisrotolo

chrisrotolo

Senior Member
Nov 3, 2010
1,905
462
Corona, CA
Samsung Galaxy S23 Ultra
this is terrible!

will try to reflash the 2.1 update again.

relashed fine, without rebooting, ran Root option from flashtool, says should be rooted after reboot, havent rebooted yet, but definetly no root.

F%ck! after flash tool finishes and reboot still zilch! I dont think flashtool is installing superuser, here's a log, man this is awful!

02/022/2011 20:22:40 - INFO - <- This level is successfully initialized
02/022/2011 20:22:54 - ERROR - Cannot identify your device. Found while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
02/022/2011 20:22:54 - INFO - Selecting from user input
02/023/2011 20:23:17 - INFO - Connected device : X10
02/023/2011 20:23:23 - INFO - Installed version of busybox : * daemon not running. starting it now on port 5037 *
02/023/2011 20:23:29 - INFO - Pushing .\custom\root\busyboxX10 to /data/local/tmp/busybox
02/023/2011 20:23:40 - INFO - Running busyhelper
02/023/2011 20:23:45 - INFO - Pushing .\custom\root\givmeroot.tar to /data/local/tmp/
02/023/2011 20:23:51 - INFO - Running part1 of Root Exploit, please wait
02/023/2011 20:23:55 - INFO - Running rootit
02/024/2011 20:24:07 - INFO - Running part2 of Root Exploit
02/024/2011 20:24:08 - INFO - Running rootit2
02/024/2011 20:24:10 - INFO - Finished!.
02/024/2011 20:24:10 - INFO - Root should be available after reboot!
02/025/2011 20:25:06 - ERROR - Cannot identify your device. Found while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
02/025/2011 20:25:06 - INFO - Selecting from user input
02/025/2011 20:25:10 - INFO - Connected device : X10
02/025/2011 20:25:10 - INFO - Installed version of busybox : /system/bin/busybox: not found

strange.. now i cant seem to get adb devices, with the latest drivers, to show anything.. cant connect to daemon... give me a break.
 

Attachments

  • flashtool_2011-05-02_08-22-40.txt
    1.4 KB · Views: 3
Last edited:

agentJBM

Senior Member
Nov 30, 2010
1,562
243
Orlando
Hate to say it, but it sounds like a isolated issue. Thousands of people used the flash tool and superoneclick successfully. Are you sure you selected the next tab, "root permissions" after root? You need to do that to install SuperUser and Busybox.

Also, antivirus should be disabled.
 
  • Like
Reactions: chrisrotolo

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    use the latest version of superoneclick and make sure you have USB debugging enabled :)


    if you have rooted with flash tool you do not need to do anything else it will be rooted you dont need x10root or other one click apk apps as flash tool rooted your phone :)

    test it with a tool that requires root such as adfree or terminal emulator :)
    1
    Best way to root, install Xrecovery and JIT enable your phone is via Flash Tool. I'm on AT&T too, and found it rather simple.

    Follow the guide found here:
    http://xdaforums.com/showthread.php?t=1012380

    Make sure you have installed java on your computer.
    Also, do not mount your SD card. While your phone is on, connect your phone via usb and hit root once your phone is recognized.

    I'm not sure if this is necessary for rooting but for flashing purposes you need to connect your phone via pc companion or SEUS. Check to see if you have the latest firmware and set your phone up to flash new firmware. The computer will install flash drivers onto your computer. You don't have to install the latest AT&T firmware if there is one. You just want to have those flash drivers on your PC.

    Hope this helps!
    1
    Just use flash tool and press root if you just want to root. You don't have to sideload any apps which is blocked by AT&T anyways.

    Update to 2.1 in order to install xrecovery. Once done updating, root it afterwards by pressing the root button on flash tool. No need to go back to 1.6 just to root. Just follow the guide and then you can install any rom you want. The Agent got your back.
    1
    Ok, so I re-read your thread. Let me summarize what I know.
    1. Flash tool says you have root after your phone rebooted
    2. You can not install busybox via flash tool

    It might be that your phone is already rooted. If you tried to install busybox or xrecovery through flash tool and have seen that the advanced options are greyed out, it is because you need to press "ask root permissions" and then accept on your phone.

    Also check to see if superuser is working correctly, Install Titanium backup to check. Install it from the marketplace open it up. A box should pop up saying "Allow Root Access"?
    If so, then you have done it correctly.


    I'm not keen with all the coding so I don't know how to read those logs you have noted.

    Try pressing root again on flash tool and let it reboot, let me know what you see afterwards.
    1
    I had those same issues with my 64bit windows 7 too. I think it has to do with Java and how adb tools works better with 32 bit. Troubleshooting your computer and phone might be the way to go.

    Make sure on your phone you have usb debugging clicked via Settings>applications>Development. Also, just for the hell of it, click unknown sources.

    Make sure on your computer, UAC/User Access Controls is turned off. If you recently installed java, reboot your computer.

    After reboot, restart cmd and get into your adb folder. Type adb devices. Should show if you have your phone connected/computer recognizes your phone.