[07.09.2012][CF-Root 5.6] K**,LA-1346,LB1,LC1,LP-1YF89,LQ-23,LR-GIKQ - su+bb+CWM5

Search This thread
By:
Advanced…
jjamain

jjamain

Senior Member
May 31, 2006
797
221
eakvigo said:
I'm update new stock rom N7000DXLC2


I'm unable to root using CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip

--- flashing zImage
/dev/block/mmcblk0p5: cannot open for write: permission denied
--- cleaning up
--- rebooting



Help me
Click to expand...
Click to collapse

The easiest way. Download odex+root for DXLC2. Once rooted you could download and use mobile odin to flash.

Speedmod kernel currently hv cwm inside. Works for LC2

Sent from my GT-N7000 using XDA
 
S

snapo6

Member
Feb 24, 2008
9
1
Since 1 month I’m a proud owner with kernel 2.6.357-N7000XXLA6 (baseband XXLA4), Netherlands version.

Now I want to root my device but keep it as close to stock as possible, understand that my current device is not rootable so I have to appy a workaround.

This is my plan, please tell whether my understanding is right:
- downgrade to a FACTORYFS (will flash to “SGN_XX_OXA_KJ1_FACTORYFS.tar”)
- flash the latest firmware back using CWM Manager (N7000XXLA6_N7000XENLA1); full ROM but keep current CF-Root kernel
- flash the CF-Root kernel related to the latest firmware i.e. CF-Root-SGN_XX_SER_LA6-v5.0-CWM5

Thanks for the feedback, I just want to be 100% sure.
 
S

snapo6

Member
Feb 24, 2008
9
1
dr.ketan said:
Better if you make 2nd step at.place 3.
As after 1st step u will have root but not cwm, so directly get cwm for final rom.

and if rom file for step 1, you can't download from op, just use 4th line on my sign, it is same.

Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse

Thanks dr.ketan, that makes sense, will change the steps.

Summarizing:
- after step 1, flash related kernel CF-Root-SGN_XX_OXA_KJ1-v5.0-CWM5.zip (step 2)
- step 3, flash newest firmware N7000XXLA6_N7000XENLA1_XEN.zip using CWM Manager and keep current CF-Root kernel

Some other issues:
- after flashing newest firmware LA6 do I also have to flash the corresponding CF-Root kernel i.e. CF-Root-SGN_XX_SER_LA6-v5.0-CWM5.zip?

Thanks for the help.
 
Last edited:
dr.ketan

dr.ketan

Recognized Developer / Recognized Contributor
Apr 9, 2011
39,237
76,830
Gujarat, India
drketanrom.com
Samsung Galaxy Watch 4
Samsung Galaxy S22 Ultra
snapo6 said:
Thanks dr.ketan, that makes sense, will change the steps.

Summarizing:
- after step 1, flash related kernel CF-Root-SGN_XX_OXA_KJ1-v5.0-CWM5.zip (step 2)
- step 3, flash newest firmware N7000XXLA6_N7000XENLA1_XEN.zip using CWM Manager and keep current CF-Root kernel

Some other issues:
- after flashing newest firmware LA6 do I also have to flash the corresponding CF-Root kernel i.e. CF-Root-SGN_XX_SER_LA6-v5.0-CWM5.zip?

Thanks for the help.
Click to expand...
Click to collapse
No still No,
If you do like this, you have to add one more step
Flash CF root LA6 to upgrade kernel, as during updating ROM(LA6), you have to 'keep CF root' that won't update kernel.
So I recommend this
- Flash Factorysys.KJ1.tar with PC Odin, at end U will have KJ1 ROM + Root
- Download this (P.S. here zImage file is already added), extract on PC, run already rooted, connect device(USB debugging, unknown sources shud be enable), it will flash CF root kernel LA6. At end U will have KJ1 ROM + Root + CF root kernel LA6 + CWM
- Flash LA6 ROM with CWM, N select 'keep CF root' when asked.
So at end of this you will have latest ROM + Kernel + Root+CWM
 
S

snapo6

Member
Feb 24, 2008
9
1
dr.ketan said:
No still No,
If you do like this, you have to add one more step
Flash CF root LA6 to upgrade kernel, as during updating ROM(LA6), you have to 'keep CF root' that won't update kernel.
So I recommend this
- Flash Factorysys.KJ1.tar with PC Odin, at end U will have KJ1 ROM + Root
- Download this (P.S. here zImage file is already added), extract on PC, run already rooted, connect device(USB debugging, unknown sources shud be enable), it will flash CF root kernel LA6. At end U will have KJ1 ROM + Root + CF root kernel LA6 + CWM
- Flash LA6 ROM with CWM, N select 'keep CF root' when asked.
So at end of this you will have latest ROM + Kernel + Root+CWM
Click to expand...
Click to collapse

Just finished above :D
I've done the following:
- Flash Factorysys.KJ1.tar with PC Odin
- After this I saw that CWM V.3 was available so I flashed kernel CF root kernel LA6 through CWM but CWM remained version 3 while I was expecting to become version 5
- with CWM latest firmware LA6 flashed

Could I have missed something by flashing this in a slightly different way than you proposed?

By the way: I'm trying to remove 'Cerberus' app without success, is this different than the standard way?
zergRush file from InitialCFRootflasher was reported as an Android virus, is that true?
 
J

jaskiratsingh

Senior Member
Oct 1, 2008
1,990
295
Nokia G10/G20/G21
Samsung Galaxy A22 4G
snapo6 said:
Since 1 month I’m a proud owner with kernel 2.6.357-N7000XXLA6 (baseband XXLA4), Netherlands version.

Now I want to root my device but keep it as close to stock as possible, understand that my current device is not rootable so I have to appy a workaround.

This is my plan, please tell whether my understanding is right:
- downgrade to a FACTORYFS (will flash to “SGN_XX_OXA_KJ1_FACTORYFS.tar”)
- flash the latest firmware back using CWM Manager (N7000XXLA6_N7000XENLA1); full ROM but keep current CF-Root kernel
- flash the CF-Root kernel related to the latest firmware i.e. CF-Root-SGN_XX_SER_LA6-v5.0-CWM5

Thanks for the feedback, I just want to be 100% sure.
Click to expand...
Click to collapse

You can also download odex+rooted version from below thread:
http://xdaforums.com/showthread.php?t=1535025

Flash it with PC ODIN and you will have root. Then you can flash CF-ROOT kernel
 
dr.ketan

dr.ketan

Recognized Developer / Recognized Contributor
Apr 9, 2011
39,237
76,830
Gujarat, India
drketanrom.com
Samsung Galaxy Watch 4
Samsung Galaxy S22 Ultra
snapo6 said:
Just finished above :D
I've done the following:
- Flash Factorysys.KJ1.tar with PC Odin
- After this I saw that CWM V.3 was available so I flashed kernel CF root kernel LA6 through CWM but CWM remained version 3 while I was expecting to become version 5
- with CWM latest firmware LA6 flashed

Could I have missed something by flashing this in a slightly different way than you proposed?

By the way: I'm trying to remove 'Cerberus' app without success, is this different than the standard way?
zergRush file from InitialCFRootflasher was reported as an Android virus, is that true?
Click to expand...
Click to collapse
'I saw cwm v3 available, so i flashed with cwm'
That i can't understand
After flashing kj1 with pc odin, cwm shouln't b there, unless u flash with initial root flasher.
Hav u flashed first cf root kernel for kj1?
Thn cf root la6?

Version is not important, it shud match to kernel. If it not matching, it will give you notice, 'you hav limited function, update it'
If you comparing cwm v5 of rom manager, that is different thing n won't work on note.
Cwm comes along with kernel, u cant select mamually. Mine is lc1 latest still cwm is 3.15. So if it working fine thn it is perfact. N you hav flash cf root kernel with initial root flasher, thn it must b perfact. (confirm in setting - about phone -.kernel

Use sytem app remover to remove cerberus.
zergrush exploit structure mimics trojen, n gives false alarm as virus. Just ignore it.

Edit : yes u need to remove adminiatration right for cerberus to uninstall.(setting-location n security-select device administrator)

Sent from my GT-N7000 using xda premium
 
Last edited:
M

MrSimtang

Senior Member
Dec 3, 2010
109
13
Hey, I'm on stock LB1 and am trying to do that method to root the phone and install CFRoot. I can get temporary root, but when it goes to push the zimage (yes I've downloaded the LB1 file, opened it and put the zimage in the right folder), I get

--- flashing zImage
cannot open for write: permission denied
--- cleaning up
--- rebooting

And it doesn't flash the CF root kernel.

Any help?
 
S

snapo6

Member
Feb 24, 2008
9
1
dr.ketan said:
'I saw cwm v3 available, so i flashed with cwm'
That i can't understand
After flashing kj1 with pc odin, cwm shouln't b there, unless u flash with initial root flasher.
Hav u flashed first cf root kernel for kj1?
Thn cf root la6?

Version is not important, it shud match to kernel. If it not matching, it will give you notice, 'you hav limited function, update it'
If you comparing cwm v5 of rom manager, that is different thing n won't work on note.
Cwm comes along with kernel, u cant select mamually. Mine is lc1 latest still cwm is 3.15. So if it working fine thn it is perfact. N you hav flash cf root kernel with initial root flasher, thn it must b perfact. (confirm in setting - about phone -.kernel

Use sytem app remover to remove cerberus.
zergrush exploit structure mimics trojen, n gives false alarm as virus. Just ignore it.

Edit : yes u need to remove adminiatration right for cerberus to uninstall.(setting-location n security-select device administrator)

Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse

You made me curious and to experience I've downgraded back and re-applied steps 1 to 4.
- downgrade back to KJ1 using ODIN (CWM avaliable and CF-R00t 5.0)
- flashed CF Root for KJ1 using InitialCFRoot (CWM available and CF Root 5.0)
- flashed CF Root LA6 using InitialCFRoot (CWM, CF Root 5.0, baseband 2.3.5)
- flashed latest firmware LA6 for NL using CWM (CWM, CF Root 5.0, baseband 2.3.6)

Wrt version of CWM I was confused with ClockWorkMod which is version 5.
And thanks for the removal tip, that was the trick.

Anyway everything works, thanks for all your help. You are a genius.
 
F

ffrancesco

Senior Member
Feb 25, 2007
68
7
Help! maxcet


And I 'are now gone and the cwm with the 3.0 rom maxcet China

What can I do to recharge the cwm?



Aiuto !!! maxcet


Mi e' sparita la cwm ed adesso sono con la rom maxcet 3.0 cinese

cosa posso fare per ricaricare la cwm?
 
Z

zuts1

Member
Apr 25, 2011
26
3
Hi,

I have just got my note and done the following

(1) Using ODIN flashed a a pre-rooted LA6 rom

this gives me root, i have checked by running the superuser app. it works. Enabling root options on File Expert. This works as i can see the request in the superuser log

(2) Dowloaded the LA6 cf-root kernel from this thread.

(3) Using mobile odin pro flashed this kernel. It seems to work, however there is no CWM manager. Also when i run superuser it appears that the apk has been replaced
as i get the initial version info. I have checked and am still definately rooted.

(4) Using script (already-rooted.bat) and adb from this thread flashed this kernel. It seems to work, however there is no CWM manager. Also when i run superuser it appears that the apk has been replaced
as i get the initial version info. I have checked and am still definately rooted.


Does anyone know why i cant get cwm? I want to back up my device before flashing other roms.

Thanks in advance for any help.
 
Last edited:
You must log in or register to reply here.

Similar threads

eybee1970
  • Locked
[ROM] ROCKET ROM - v23 - GB - LC1 [Update 29/03] - JKay Mod 13.6.1 - MIUI Style Theme
Replies
10K
Views
2M
eybee1970
eybee1970
Phil3759
  • Poll
[PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA
Replies
4K
Views
2M
nrmldgs
nrmldgs
bauner
[ROM][CM12.1][Lollipop][Android 5.1.1] NightOwl 20180124
Replies
12K
Views
2M
Asterix1007
Asterix1007
maxicet
[ROM] TheMIDTeam 1.6.2 Codename "B&G" LQ3 (07/20/12)
Replies
4K
Views
699K
M
mangesh hotkar
criskelo
[ROM] Criskelo's ICS V11.2 << LRK 4.0.4>> ICS 15 togg TW*S3*-AROM <<<SIM-Lock FIX>>>
Replies
4K
Views
1M
raghav84
raghav84

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 502
    Chainfire
    Chainfire
    This rooted kernel is for the "rooting beginners" and those who want to keep as close to stock as possible. CF-Root takes the kernel from an original Samsung firmware, and just adds root, busybox, and ClockWorkMod recovery

    THIS IS NOT A ROM - it is only a modified kernel. You need to have the relevant firmware already on your device. You do NOT need to wipe anything for this patch. You DO need to read the instructions. PLEASE READ THE ENTIRE FIRST FEW POSTS!

    Donate
    There have now been nearly 1.000.000 downloads of CF-Root for various devices (see for example Galaxy S1, Galaxy Tab 7", and Galaxy S2), and many more if you include ROMs, kernels, etc that use it. Don't be a leech, buy me a beer (and use the "Thanks" button!). Imagine if every CF-Root user had donated me $1... :)

    Main features
    - The kernel is fully stock and taken from the original firmware, with just the following added:
    - Root
    - Busybox v1.19.2-cm71
    - ClockWorkMod Recovery 5
    - CWM Manager (see below for more detail)
    - Custom boot / init scripts
    - Custom boot animations

    v5.3 and newer
    - SuperSU (replaces Superuser)
    - "Fake-secure" (ro.secure=1, but ADB is patched to run as ro.secure=0)

    v5.5 and newer
    - CWM updated to v5.5

    v5.6 and newer
    - Possible brickbug fix

    Installation instructions
    Please see the next post !

    Other kernels
    Replacing CF-Root with other kernels and vice-versa sometimes works, sometimes it doesn't. I don't have a list.

    When going from CF-Root to another kernel, root will usually stay, while CWM will be lost (unless the other kernel also includes it), but there should not be issues. The CWM Manager app may remain, but probably won't do anything useful.

    ClockworkMod
    CF-Root includes a custom version of CWM5. I always make custom versions, as the originals often do not take some Samsung specific things into account.

    CF-Root/CWM5 is NOT compatible with ROM Manager! Manage/perform your backup/restores from CWM directly or using the CWM Manager application included with CF-Root

    - Booting into recovery will immediately give you CWM. The standard recovery will only be started if a Samsung package is detected.
    - ADB is functional in recovery, however it may take up to a minute for it to start up after booting into recovery.

    CWM Manager
    Because of incompatibilities with ROM Manager, I wrote and included "CWM Manager". This is a new app (as of March 30, 2011). You can find it under Applications -> CWM. It is much faster to use than manually booting into CWM and selecting these options.

    Features:
    - Boot to ClockWorkMod Recovery
    - Boot to Download mode
    - Reboot normally
    - Backup firmware
    - Restore backups (including partition selection)
    - Delete backups
    - Install APKs
    - Flash CWM3/4/5 update.zip's
    - Flash kernels (zImage, zImage in TAR, zImage in ZIP, zImage in TAR in ZIP)
    --- without changing warning triangle status or increasing flash counter
    - Flash complete firmwares (seperate files as well as .tar and .tar.md5 archives, dump files in /sdcard/external_sd/firmware folder)
    --- without changing warning triangle status or increasing flash counter
    --- can pre-root new firmwares during flash

    Note: If you flash a different kernel, CWM Manager may remain installed. However, functions may not work, because they need kernel compatibility !

    Custom boot / init scripts
    CF-Root will execute the following scripts if present, in the order listed:

    - /system/etc/init.d/* (there can be many files here, no extensions! use #!)
    - /system/bin/customboot.sh (busybox sh)
    - /system/xbin/customboot.sh (busybox sh)
    - /data/local/customboot.sh (busybox sh)

    Please make sure you chown / chmod the scripts correctly so they can be executed. Pretty much root:root / 755.

    Custom boot animations and binaries
    CF-Root also supports custom boot animations:

    - /system/media/bootanimation.zip
    - /data/local/bootanimation.zip

    And custom boot binaries:

    - /data/local/bootanimation.bin

    Installing busybox over the included version
    It is possible to install a custom busybox over CF-Root v3.0 and newer. However, this is not without risk. CF-Root makes heavy use of scripting, and many CF-Root scripts rely on the internal busybox version. If you do install a seperate busybox version (always use "stericson" installer!), install it to /system/xbin. Installing it to /system/bin will mess things up for sure. Even if you do that part right, it may still break CF-Root, so make sure to make a backup before trying.

    How ?
    I wrote my own toolchain to ease patching of initramfs, and that is what all this is based on. It is now used to make CF-Root for many devices!

    Help! Which file do I use ?
    Listen closely, for I will say zis only once!

    Go to Settings -> About phone -> Kernel Version. Note the string present there:

    2.6.35.7-N7000XXKJ4-CL641703

    What matters most (KJ4) in this case, is in bold. Try to find the matching file under downloads:

    CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM4.zip

    The XX and XEN identifiers are not that important. Usually a "KJ4" kernel is a "KJ4" kernel, and that is that. Sometimes (pretty rare) it happens there will be multiple different kernels with the same name in different firmwares, that are actually different. If this happens, they are usually only very minor changes and you should expect them to still be fully compatible. I include the "XX" and "XEN" identifiers so the very advanced users can deduce from which full firmware I have taken the kernel file.

    Don't worry too much, just find the matching download and use it. What if there is no matching download ? You can ask me to make one, but I can tell you right now, I very very rarely make CF-Root's for kernels on request, unless it is the very latest kernel that has been released by Samsung. In the latter case, be sure to let me know. If there's no match and I'm not making one, try finding the closest match. You should treat "KJ4" as a number, but instead of 1-9, we have 1-9, A-Z (where A would be 10, and Z would be 35). "KJ3" is really close to "KJ4", "KF1" is not close to "KG4" at all. I hope that makes sense.

    @Developers: I have noticed that doing a NANDROID RESTORE while connected to your computer AND Eclipse is running may cause the restore to fail. Eclipse automatically starts logcatting in the background, which will prevent /system from being properly restored.

    Download
    These are general-purpose downloads. See the posts following this one for the kernels.
    View
    188
    Chainfire
    Chainfire
    Installation intructions

    The Samsung Galaxy Note keeps track of the kind of kernel you are running (stock or custom) and how often you have flashed kernels. This is probably for warranty purposes. There is currently no known way to reset this counter on the SGN.

    So, what we want to do is get root, busybox, and CWM, all without getting that ugly yellow triangle or updating the flash counter on our device. Luckily, CF-Root allows for all these things. The new CWM Manager even allows you to flash new firmwares and apply root to them while flashing.

    We need to get rid of ODIN pretty much completely, and we can! The difficult part is getting root the first time, after that, it should be happy camping forever.

    --- Chapter 1: Initial application of root ---

    DO NOT USE ODIN TO FLASH THE KERNEL !

    This is the annoying part. There are three different methods:

    1.1. If you are already rooted

    - Download the attached "InitialRootFlasher.zip" and extract it somewhere
    - Download one of the CF-Root kernels, and extract it (repeat) until you end up with a zImage file
    - Place the zImage file from the CF-Root kernel in the zImage folder from InitialRootFlasher
    - Start "already-rooted.bat" and follow the instructions

    For those needing to do this manually (Linux boxes and such), this is the important command. Place the zImage file on your phone (example: /data/local/zImage) and execute this command in a rooted shell:
    dd if=/data/local/zImage of=/dev/block/mmcblk0p5 bs=4096

    1.2. If you are not rooted yet: Using the zergRush exploit This method no longer works on KL* and newer firmwares!

    (while it still works on our firmwares, this exploit will probably be fixed soon! Known to work on KJ1 and KJ4 firmwares)

    - Download the attached "InitialRootFlasher.zip" and extract it somewhere
    - Download one of the CF-Root kernels, and extract it (repeat) until you end up with a zImage file
    - Place the zImage file from the CF-Root kernel in the zImage folder from InitialRootFlasher
    - Start "not-rooted-yet.bat" and follow the instructions

    1.3. If you are not rooted yet: Flash a modified FACTORYFS

    I am providing this method just this once, for the KJ1 firmware. This is the /system part of the KJ1 firmware, modified so at first boot it will flash the KJ1 CF-Root and reboot, without getting you the yellow triangle or increasing the flash counter.

    Using a newer firmware? Do this operation first, then flash the newer firmware back using CWM Manager. This is explained in Chapter 3 below.

    Download: http://www.multiupload.com/YB9EL8D8O3

    - Optional: flash the full KJ1 firmware first
    - Unzip the file, you should get "SGN_XX_OXA_KJ1_FACTORYFS.tar"
    - Make sure your SGN is NOT connected to your computer
    - Reboot your SGN into "download mode" (see below)
    - Start ODIN
    - Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
    - Connect the SGN to your computer
    - Make sure "repartition" is NOT checked
    - Click the START button
    - Wait for the phone to reboot TWICE
    - Done

    If you do not know how to get into download mode:
    - Turn off the device
    - Count to 10
    - Hold the "home" (the big physical button in the middle) and "volume down" buttons
    - Press and release the power button (keep holding "home" and "volume down" !) to turn the device on
    - You should get a download mode screen
    - If it tells you to press a button to continue, do so

    --- Chapter 2: Getting rid of ODIN ---

    This is easy. Find ODIN, and delete it. In the future you should only need it to flash bootloaders, which probably will only really be needed one time: when upgrading from Gingerbread to Ice Cream Sandwich.

    --- Chapter 3: Upgrading your firmware ---

    My CWM Manager application has a full-fledged firmware flasher built in. Using the flasher from CWM Manager does NOT give you the yellow triangle or increase the flash counter.

    3.1. Flashing a new kernel

    This is easy. CWM Manager can flash zImage files (on any rooted kernel), zImage files inside a .tar file (only on a CF-Root kernel), and zImage files inside a .tar.zip (only on a CF-Root kernel). Note that zImage must be the ONLY file in an archive, if is is inside a tar or zipped tar.

    - Put the zImage (or tar, or zip) file on your SD card
    - Open the CWM Manager app
    - Select "Flash kernel"
    - Select the file you just put on your device
    - CWM Manager will flash the kernel and reboot

    If you flash a non-CF-Root kernel, you will lose a lot of functionality from CWM Manager. However, the app will (likely) still allow you to flash kernels.

    3.2. Flashing a new firmware

    Important: This works ONLY on a CF-Root kernel !

    CWM Manager has the ability to flash firmware parts either from separate files (zImage, factoryfs.img, etc) or from .tar / .tar.md5 files that they usually come packaged in.

    - Download the firmware you want to flash
    - If you have a ZIP or RAR file, extract it until you have seperate files, or .tar / .tar.md5 files
    - Create a folder named 'firmware' on your external SD card
    - Copy the files you want to flash to this folder ( /sdcard/external_sd/firmware ). factoryfs ("system") is mandatory part at the moment.
    - TIP: If you are flashing a new firmware that already has a CF-Root kernel available, put it in the 'firmware' folder as well in zImage or .tar form (NOT .zip). Select it when asked which kernel to use, then use the "Flash normally" option later on.
    - Open the CWM Manager app
    - Select "Flash stock firmware"

    - At this point, CWM Manager will tell you about the firmware parts it has found, and which ones it will flash. It will also give you warnings about bootloaders and PIT files if those were found. If some firmware parts are present multiple times, it will ask you which file to use as source.

    - If what you are flashing includes both kernel and system parts, CWM Manager will warn you about this as you are about to lose root. It will provide you with three options:

    1: Keep CF-Root kernel
    Keeps the current CF-Root kernel, only flash the other parts. You will not lose root or CWM Recovery. You can flash a newer CF-Root kernel later (or maybe you have already done so), see 3.1 above.

    2: Pre-root system
    Flashes both kernel and system parts, but roots system during the flash. You will lose CWM Recovery, but you will keep root (if all goes well). The CWM Manager application will also remain, and allow you to flash the correct CF-Root kernel at a different time (if you have not done so before), see 3.1 above.

    3: Flash normally
    Doesn't do anything specific. If the kernel you are flashing is not a CF-Root (or similar) kernel, you will lose root, and CWM Recovery.

    - CWM Manager will reboot into CWM Recovery, and will flash the firmware, rebooting afterwards.
    View
    150
    Chainfire
    Chainfire
    ALL THE KERNELS IN THIS POST ARE OUTDATED AND/OR DANGEROUS, GO TO THE NEXT POST !

    CF-Root-I9220_ZC_OZH_LP1-v5.2-CWM5.zip

    CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip *read before flashing LPY: http://xdaforums.com/showpost.php?p=25966147&postcount=1322* *old*

    CF-Root-SGN_ZS_OZS_LPF-v5.3-CWM5.zip *old*

    CF-Root v5.5:

    CF-Root-SGN_XX_OXA_LPY-v5.5-CWM5.zip
    CF-Root-SGN_ZS_OZS_LPF-v5.5-CWM5.zip
    CF-Root-SGN_DD_ODD_LP8-v5.5-CWM5.zip
    CF-Root-SGN_DX_OLB_LP9-v5.5-CWM5.zip

    Be warned that *all* of the above kernels may be suffering from the superbrick bug ( http://xdaforums.com/showpost.php?p=25966147&postcount=1322 ) !
    View
    140
    Chainfire
    Chainfire
    PLEASE READ THIS POST BEFORE FLASHING !

    CF-Root-SGN_XX_OXA_LPY-v5.6-CWM5.zip
    CF-Root-SGN_ZS_OZS_LPF-v5.6-CWM5.zip
    CF-Root-SGN_DD_ODD_LP8-v5.6-CWM5.zip
    CF-Root-SGN_DX_OLB_LP9-v5.6-CWM5.zip

    CF-Root-SGN_XX_XEU_LQ2-v5.6-CWM5.zip
    CF-Root-SGN_XX_SEB_LQ3-v5.6-CWM5.zip
    CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5.zip
    CF-Root-SGN_XX_OXX_LRI-v5.6-CWM5.zip
    CF-Root-SGN_XX_DBT_LRK-v5.6-CWM5.zip
    CF-Root-SGN_XX_DBT_LRQ-v5.6-CWM5.zip
    View
    135
    Chainfire
    Chainfire
    Downloads

    See the second post of the thread for flashing instructions. If you're thinking about using ODIN to do it, you should probably read that post.

    CF-Root-SGN_XX_OXA_KJ1-v5.0-CWM5.zip
    CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM5.zip
    CF-Root-SGN_ZS_MUL_KJ6-v5.0-CWM5.zip
    CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.zip
    CF-Root-SGN_XX_DBT_KK9-v5.0-CWM5.zip
    CF-Root-SGN_XX_AUT_KKA-v5.0-CWM5.zip
    CF-Root-SGN_XX_ODD_KL3-v5.0-CWM5.zip
    View

New posts