[SOLVED] SIII Network problem after the update and sn 0000... Problem- solved !!!

Search This thread

zuluman

Senior Member
Oct 12, 2006
165
263
istanbul
If ariza patch only flash patched modem it will not work. Because new kernel check modem signatur.

Sent from my GT-I9300 using xda app-developers app
 

tcbobo

Member
Jul 11, 2009
7
1
It didnt worked for me either on MJ3 :(

I had stock 4.1.2
GT-I9300 Hungary 2013 February 4.1.2 I9300XXELLA I9300OXFELL1
rooted than use ariza v0,5 the efs restore --> got signal, everything ok

Then i install (odin) stock 4.3
GT-I9300 Austria (A1) 2013 November 4.3 I9300XXUGMJ9 I9300VFGGMJ5
rooted, then use ariza v0,6 --> everyting (baseband also) unknown :( :(
 

musvi

Senior Member
Jan 16, 2011
465
72
Dhaka
If ariza patch only flash patched modem it will not work. Because new kernel check modem signatur.

Sent from my GT-I9300 using xda app-developers app

so we need to apply v06 patch on unmodded or upatched pure stock modem right? so which modem do u recommend for sammy's 4.3, mg4 or MJ3(4.3 shipped modem)?
 
Last edited:

ddaflorez

Senior Member
Oct 21, 2012
736
145
V06 online patch ready MG Rom and Android 4.3 working.can be installed on My apk patch.

baseband unknown ime null after aplying (v0.6) for 4.3. Base band was UMBJ3 . After aplying MG4 baseband over this firmware recovered my imei but still emergency calls only.... any idea ? Would be great if you solve this.

Enviado desde mi GT-I9300 usando Tapatalk 2
 

Attachments

  • uploadfromtaptalk1384014112495.jpg
    uploadfromtaptalk1384014112495.jpg
    63.9 KB · Views: 195
Last edited:

dudikaz

Senior Member
Nov 5, 2013
71
2
I have ready patch for 4.3 rom but it need init.d support for run a script or run command manually or ask to add my mod from kernel developer

Sent from my GT-I9300 using xda app-developers app

could you please give us directions what and where to edit in modem.bin like you did with mg4?
 
Nov 9, 2013
10
4
Plz Ariza help us .... the patch didn't work

could you plz tell us what is the rom version you have tested, because the latest 4.3 rom is released in three countries in Europe union.

---------- Post added at 06:57 PM ---------- Previous post was at 06:51 PM ----------

I have ready patch for 4.3 rom but it need init.d support for run a script or run command manually or ask to add my mod from kernel developer

Sent from my GT-I9300 using xda app-developers app

plz zuluman, pass your patch to us, i've installed wanam 4.3 rom with adam kernal which support init.d
 

musvi

Senior Member
Jan 16, 2011
465
72
Dhaka
I have ready patch for 4.3 rom but it need init.d support for run a script or run command manually or ask to add my mod from kernel developer

Sent from my GT-I9300 using xda app-developers app

bro developers already released the custom kernel supporting init.d support, so what if install a custom rom(official 4.3) with root, then flash a kernel supporting init.d execution, then put your xxx.sh file in root/etc/init.d folder and after that apply patch 06 and reboot so that just after applying the patch and during 1st startup your xxx.sh file will be executed and thus preventing kernel to change efs/modem to mess up things, would that work?
 
Last edited:
  • Like
Reactions: ErnestoD

abdussamad

Senior Member
Apr 11, 2011
107
7
islamabad
bro developers already released the custom kernel supporting init.d support, so what if install a custom rom(official 4.3) with root, then flash a kernel supporting init.d execution, then put your xxx.sh file in root/etc/init.d folder and after that apply patch 06 and reboot so that just after applying the patch and during 1st startup your xxx.sh file will be executed and thus preventing kernel to change efs/modem to mess up things, would that work?

can you tell which custom kernel ??
 

abdussamad

Senior Member
Apr 11, 2011
107
7
islamabad
my imie is correct and sn is correct too but i have no network.the ariza app is not downloading the v0.6 patch.please helppp

---------- Post added at 01:24 AM ---------- Previous post was at 01:19 AM ----------

when i use a 4.1.2 the app downloads and install the v0.6 patch but still i have no network connection
 

zuluman

Senior Member
Oct 12, 2006
165
263
istanbul
Originally Posted by zuluman<br />
I have ready patch for 4.3 rom but it need init.d support for run a script or run command manually or ask to add my mod from kernel developer<br />
<br />
Sent from my GT-I9300 using xda app-developers app
<br />
<br />
bro developers already released the custom kernel supporting init.d support, so what if install a custom rom(official 4.3) with root, then flash a kernel supporting init.d execution, then put your xxx.sh file in root/etc/init.d folder and after that apply patch 06 and reboot so that just after applying the patch and during 1st startup your xxx.sh file will be executed and thus preventing kernel to change efs/modem to mess up things, would that work?
Yes work. You dont need 06 patch.
I will try my zip with custom kernel than relase it wait alittle bit


Sent from my GT-I9300 using xda app-developers app
 

besho1996

Member
Nov 9, 2013
9
0
can u help me please

My imei number didn't change but there is no network on android 4.3 i installed ariza patch but when i click on V{0.6} apply patch the line didn't start just it stop on 0% didn't walk and i try to connect to vpn and the same problem please help me
 

Top Liked Posts

  • There are no posts matching your filters.
  • 208
    Please read be careful because of as responsıbılıty on you.
    Hi all.
    I'm ibrahim from gaziantep – turkey.i'm 26 years old.i have experınce and knowladge on pc & telephone hardware , software image & securıty.

    -CHANGED IMEI,NETWORK PROBLEM AFTER THE UPDATE AND SN 0000... PROBLEM- SOLVED !!!

    ıf the ımeı changed of machıne even return orıgınal ımeı you can see problem.because of the machıne sn number had been broken.

    this is the first time on the world. that transactıon made from me. and the ınventor ıs from turkey agaın (patch transactıon).

    before all else the phones efs fıle had been broken .ıt reads from efs memblock. when ıt done patch operatıon code of network past to modem.when you update your network will be gone.what can we do on thıs case ?
    V.06 Ready For Mg rom and Android 4.3 worked.
    Ofline patch
    hdn1x.png
    hdn20.png



    Online ota update patch

    hdn1v.png
    hdn24.png


    LINK : Patch download




    NOTE II and Galaxy SIII Patch

    Two language English and Turkish


    Patch Download My application and install on your phone after click apply patch or If you have internet wait for orientation the patch online..And apply my patch

    BusyBox installer;
    https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer&hl=tr

    BusyBox advanced install. " /system/bin" change " /system/xbin " and install.

    Change Log ;

    v1.0 >> V1.1 note II corrected offline mode



    warning : If your imei number like 0000**** 0049*** my patch wont work ! This solution is just for who has a Changed SN and No Network After The Update !

    People who have already read this topic or used my patch please leave a comment.. Your comments are very important for others who wants to use this patch.. Also very important to be current for the new updates..

    My ROM POST = http://xdaforums.com/showthread.php?p=35243885

    ıf you bored from s3.there ıs good news ıts survıve.
    ı have already tried this solution many phones and all of them works !!!

    Q: This patch is gonna clone my phone ?
    A: No,it's gonna bring your network back.

    Q: My imei number like 0000**** or 0049**** if i flash this patch it will work or it will bring my original imei number back ?
    A: This patch is not about your EFS Folder it is just about network so it won't fix your imei number or bring your original imei number back.

    Q: I will do these 2 ways step by step ? Do i have to flash offical firmware first and then flash custum rom ?
    A: No,you can choose one of them this is your decision.

    Q: Can this patch fix my SN ?
    A: No it can't but it doesn't matter because you will always be current.

    Q: How can i use it on stock rom ?
    A: First change your kernel with CF-Root and follow the steps.

    Q: After this operation i will update my phone ? Is it a certain solution ?
    A: No after the each update you should flash my patch.

    Q: I didn't wipe my daha cache etc. do i have to wipe ?
    A: Super wipe will clean your system completely so it is doing everything but if you want to ensure you can do them again.

    Q: I have a S3 which has a baseband XXALEF-XXLFB can i use your patch ?
    A: I have made this patch for just flash my patch after the each installation. It works if your EFS folder is OK.

    If you like my hard working project consider a donation.

    DONATE​

    USD USD DONATE
    TL TL DONATE
    EURO EURO DONATE
    37
    n7100 now working :good:
    enjoy sam 4.3 rom

    @jhonyp thanks alot for helping

    https://drive.google.com/folderview?id=0B6MIUd7HJudAbU5YaGkzOUowMG8&usp=sharing





    yesilcin.com sitesinden kullanan kişilere hakkımı helal etmiyorum
    32
    patched BUUGMJ3 modem and patched stock XXUFMJ9 kernel are ready for flash
    it works only sam 4.3 rom
    enjoy sam 4.3 rom








    yesilcin.com sitesinden dosyayı veya yöntemi kullananlara hakkımı helal etmiyorum
    17
    it is universal network fix script for 4.3 custom kernels but need init.d supporting
    you still need patched modem, flash the script and patched modem in recovery menu.
    for now it's only for i9300 4.3 roms and testing release.
    feedback which kernel you tested