[APP]SuperOneClick v2.3.3 - Motorola Exploit Added!

Status
Not open for further replies.
Search This thread

adictx

New member
Sep 16, 2011
2
0
LG Revolution Root Failure :(

Hey Guys I have been trying so hard to root my phone!

please help me :)

- All one clicks ... no success

- Windows ADB way - NO luck

Where should i start

please contact me! rooting this phone is my full time job!!!

needs overclock + remove bloat!

(760) five seven nine 9029
adxsports @ gmail . com


please help yall
 

mimirom

Senior Member
Oct 4, 2010
89
9
Prague
I am on a stock Android 2.3.3. Could you send me a link to flash my bootloader. Also, when i try to turn the USB Debugging off i get the error message "USB Cable is connected" or something like that. So to turn off and back on i have to take out the cable. Don't know how you got that to work!

Well, as I said, I did it on an HTC desire S. Probably slightly different...

Sent from my HTC Desire S using XDA App
 

davvid420

Senior Member
May 22, 2010
50
3
wood river
This is not allowing me to root my phone at all I dont know what the deal is i just got my phone today. Moving from my atrix. But i get a error when trying to root on the step where it tries to mount the system as writable. Say in quote
"remounting /system with read-write access....
Mount: Operation not permitted
FAILED"

Any help would be great thanks guys....
 

creed

Senior Member
Feb 28, 2006
215
8
WOAH! I got past step 6!!!

I kept having the same problems as lots of you, couldn't get past step 6.

Here's exactly what I did:

So I have loaded already an insecure kernel.
I have USB debug enabled.
Plug in my USB.
Start Superoneclick, it opens, I hit root
It stalls at step 6
So then I try to turn off USB debug, but it says you have to unplug USB cable, so I did.
When I did that, Superoneclick proceeded through to step 7!
So then I plugged the phone back in with USB debug enabled and it carried on loading everything!
And now I have a rooted S2!

If you give this a try, hope it works for you :)
 
Last edited:
  • Like
Reactions: ajaypalnitj

Gage_Hero

Senior Member
Jul 22, 2010
1,423
235
Root Telus galaxy T959P Gingerbread Solution

Tried this on the T959P, got stuck at step 5, this is after the update to 2.3.4
T959PTLKH2

Anyone else run into this and if so how to get around it?

Hi All,

For anyone searching to root the Telus Galaxy 4 G T959P with gingerbread 2.3.4 it can be done. Have a look over here to see how I did it....
http://xdaforums.com/showthread.php?p=17941856#post17941856
Note this is ONLY for Model T959P
Proceed at your own risk.... So far we have 3 sucessful roots......
 

Kisscool841

Senior Member
Mar 9, 2011
58
2
tryin to root an xperia x10i pro and getting no response from superoneclick at step6.
Also tried on recovery mod...
Got 7 64x professional edition.
May anyone help ?
 

kbolt

Senior Member
Sep 20, 2011
132
5
I kept having the same problems as lots of you, couldn't get past step 6.

Here's exactly what I did:

So I have loaded already an insecure kernel.
I have USB debug enabled.
Plug in my USB.
Start Superoneclick, it opens, I hit root
It stalls at step 6
So then I try to turn off USB debug, but it says you have to unplug USB cable, so I did.
When I did that, Superoneclick proceeded through to step 7!
So then I plugged the phone back in with USB debug enabled and it carried on loading everything!
And now I have a rooted S2!

If you give this a try, hope it works for you :)

Has anyone with a Captivate (preferably running 2.3.4) tried this yet?
 

emtownsend

Senior Member
Feb 7, 2008
638
91
SuperOneClick 2.1.1 not working once flashed to 2.3.5 on Infuse

OK, I ran SuperOneClick 2.1.1 to root my Infuse.
Then I installed ROM I997UCKI4 and it not working 100%. I mean most functions seem OK, but on boot there is a rainbow screen that looks like the LCD got smashed, and the battery life is really really bad.
All that aside, my real problem is, I cannot go back to stock.
ODIN 1.7 won't work as it appears that the I997UCKI4 ROM (2.3.5) has unrooted my phone and SuperOneClick fails at step #6 every time.
What can I do to return to stock so I can swap this out for the SG2?
 

ski61

New member
Sep 29, 2011
3
0
Hey everyone. I just a new G2x with 2.3.3 gingerbread installed. Im trying to use the SuperOneClick app but it hangs at the "Waiting for device" Ive tried turning the USB Debugging feature on and off while it hangs but no luck. Also the App goes into the "Not Responding" mode after 5 seconds. Any ideas?
 
Sep 6, 2011
20
2
Hey everyone. I just a new G2x with 2.3.3 gingerbread installed. Im trying to use the SuperOneClick app but it hangs at the "Waiting for device" Ive tried turning the USB Debugging feature on and off while it hangs but no luck. Also the App goes into the "Not Responding" mode after 5 seconds. Any ideas?

One click root don't work for g2x 2.3.3 this is how I root mine
http://xdaforums.com/showthread.php?t=1255214

Sent from my LG-P999
 
  • Like
Reactions: bakkagaijin

emtownsend

Senior Member
Feb 7, 2008
638
91
Anyone know why there are so many of us who are stuck at step #6?
I tried pulling the USB at step 6, and it does continue, but then if fails.

I would recommend that if you use SOC that you make sure you don't need to re-apply it after an update from a 2.2.x Android system.
Seems that I've read a lot of posts (just google OneStepClick cannot get past #6) where most folks on 2.3.x and over cannot re-run it again.

I am happy to have the free app and the knowledgeable people who brought it to us... Just frustrated being stuck.
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 720
    SuperOneClick


    FOR ANDROID GINGERBREAD AND EARLIER DEVICES




    rootedgingerbreak.png

    Downloads available at http://shortfuse.org/

    v2.3.3
    ------
    Motorola ADB Patching
    Checks for shell root before applying exploits
    Unroot has been fixed to work more reliably
    LG devices no longer need to use alternate ADB

    v2.3.2
    ------
    Better LG phone support

    v2.3.1
    ------
    Auto driver installation

    v2.2 is up!
    zergRush and Superuser 3.0.6 included
    ----------------------------------------------

    v2.1.1 is up!

    Driver pack comes later!

    ---


    I made it. I tested it. It works. You can get it from shortfuse.org or use the links below (if you're a registered XDA member).

    Here's a one-click root with almost all phones and all android versions. (including the i9000, Droid, Nexus One, etc)

    YOU CAN ROOT ALMOST ALL ANDROID PHONES! :)

    The program requires Microsoft .NET Framework 2.0+ or Mono v1.2.6+
    Operations systems with native support:
    • Windows Vista
    • Windows 7
    • Ubuntu Hardy (8.04 LTS)
    • Ubuntu Jaunty (9.04)
    • Ubuntu Karmic (9.10)
    • Ubuntu Lucid (10.04 LTS)
    • Ubuntu Maverick (10.10)
    • Debian Lenny (5.0)
    • Debian Squeeze (testing)
    • Debian Sid (unstable)
    • Debian Experimental

    If you run Microsoft Windows XP, install .NET Framework v2.0 or above
    If you run Mac or another Linux flavor, make sure you install Mono:
    http://www.go-mono.com/mono-downloads/download.html

    For more information about making it work in linux:
    See here


    You NEED to put your phone on USB Debugging mode
    You NEED to install make sure the Android drivers for your phone are installed
    Make sure you DO NOT mount your SD card.
    If you still can't get something to run, try doing it in recovery mode.


    Read me: (READ BEFORE POSTING)
    2/24/2011:
    I registered my website shortfuse.org so you can grab SuperOneClick from there now.

    2/22/2011:

    Great news. -1Day roots AT&T Motorola Atrix4G!!! YAY!

    11/29/2010:

    I'm sorry I haven't been updating lately!!! The problem is, I no longer have an Android phone and I can't play around or test anymore. I'm going to see if I can find one on craiglist or ebay.

    11/10/2010:
    I finally figured out how to root without looping. After rooting 13 phones, this is how I did it on the first try.

    Turn USB Debugging OFF

    Click Root

    When it says: Waiting for Device, Turn USB Debugging ON

    It'll now run RATC

    When it says: Starting ADB Server...
    Turn USB Debugging OFF
    Turn USB Debugging ON
    Turn USB Debugging OFF
    All BEFORE it says "Waiting for device..." again


    11/1/2010:
    Hey guys! I'm sorry I haven't been able to respond to lots of posts. I've been really busy lately with work. I've been reading some posts and I've made some changes in v1.5.2

    Let me know what bugs and issues you guys have.


    10/17/2010:
    Thanks to all that donated! I was worried for a bit but you guys proved me wrong. So, I fixed the NMA (non market apps) button. It should now install sqlite3 and busybox into a temporary folder if you don't have it. I added an unroot (by popular demand). I did some major code clean up, so you can expect faster releases from here on out. Next version will add sqlite3 and busybox to the /system partition included in root.

    If you're having issues with "wait for device" or if RATC is looping, try this
    Unplug your USB Cable
    Go to Settings > Applications > Development
    Uncheck USB Debugging
    Plug in your USB Cable
    Unplug your USB Cable
    Check USB Debugging
    Plug in your USB Cable

    10/13/2010:
    I need people with issues to post their device model and if they tried rooting in recovery mode. All posts ignoring the read me will be ignored. (meaning nma complaints and those NAND locked devices).
    I'm getting flooded with replies, PMs and emails. Seriously, try reading a few posts back.
    The program has been downloaded over 5000 times and only 2 people have have donated. I see donations as signs of gratitude. Even if it's 25 cents, please donate.
    When I find the time (and will) I will work on the v1.5 release.
    The rageagainstthecage looping is by design. Bad usb cables and ports can cause ratc to not run properly so I have it loop until it works. The "waiting for device" hang is for the same reason. There's nothing wrong with my application. It's usually your usb cable or port. This is not a cop-out answer. This is not an excuse as if I didn't know why it happens. This has been investigated and the problem is USB connectivity. It happens with my Captivate as well.

    10/11/2010:
    Enabling market apps isn't working unless you have busybox installed. I plan to fix this in the next version. The problem is, different devices have different locations for the com.provider.android.settings/settings.db and I was using the 'find' command to find your settings.db location. I didn't realize this was a busybox command not internal. That will be fixed.

    I also added some information about root that I think people should read and classified different root levels.

    By classifying root levels, I make it easier for the users to know if certain options will work or not. For example, enabling non-market apps will only require a Level 1 root, meaning it will work with the HTC Aria

    Donate

    Donate if you wish... :)

    Compatibility list
    Please note that if you device is not listed here, it doesn't automatically make it incompatible. The list is definitely incomplete.
    Use the search feature to search for your phone model: http://xdaforums.com/search.php?searchthreadid=803682

    Incompatibility list

    With the absolutely beautiful ADB exploit I use, titled rageagainstthecage (ratc), absolute ALL devices can be rooted. This is because it exploit is ADB which all devices use. There is an issue though. Some devices have a NAND lock which does not allow you to write to the /system mount. Because of this, you can't copy su, sqlite or busybox to /system/bin. This creates some issues but there is a work around. For things that don't need access to /system (like enabling non-market apps) I can use the ratc exploit to make those changes. If your device cannot use su in /system/bin then you can simple select a checkbox (as of v1.5) that says to use ratc.

    There are 3 levels of "root" we can define:
    Level 1: Shell Root (with ratc rooting the adb shell but no /system write access)
    Level 2: Temporary Root (/system/bin/su installed but lost on reboot)
    Level 3: Full Root (/system/bin/su installed and sticks)

    Some devices have a NAND lock. SuperOneClick will only give a Shell root until you remove this lock.
    The following phones can use http://unrevoked.com to remove this lock:
    • Sprint EVO 4G (HTC Supersonic)
    • Droid Incredible (HTC Incredible)
    • HTC Desire GSM
    • HTC Desire CDMA (HTC BravoC)
    • HTC Aria
    • Droid Eris (HTC DesireC)
    • HTC Wildfire (HTC Buzz)

    THe HTC Legend and My Touch 3G 32A also have a NAND lock and need more specific methods to unlock.

    The T-Mobile (HTC) G2 has something different which may or may not be a hardware flaw. I have yet to really research the device, but while it may root, it won't be permanent since copying /su to /system/bin/su has problems. I believe this is a Level 2 root, but to be honest, I need to research more.

    All other devices has a Level 3 root via SuperOneClick

    Version changes:
    v1.9.5
    Driver Installation Fix
    Force Administrator on Vista/Win7
    Fixed Non-Market Apps not working for some devices

    v1.9.1
    GingerBreak support! (I think)

    v1.9
    Bug fixes!
    Should work better now on XP systems and Linux

    v1.8
    Automatic driver installation
    Removed RageAgainstTheCage (no virus flags)
    New folder structure
    Major code clean up

    v1.7
    Hopefully fixed Linux hangs
    Theoretical honeycomb support (still needs testing)

    v1.6.5
    Fixed major bug. Oops!

    v1.6.4
    Installs busybox to /system/xbin and installs syslinks
    Added a 30 second timeout check (should eliminate all lock ups)

    v1.6.3
    Mounts with busybox first
    Includes version in first line

    v1.6.2
    Fixed wrong su version being sent
    Fixed issue when getting OS version
    Prints device info on failure.

    v1.6.1
    Falls back to previous mount path method if busybox method fails

    v1.6
    Uses psneuter for exploit instead of rageagainstthecage by default (should root Sony Ericsson devices easily now)
    Added detection for 1.x Donut/Eclair kernels
    Uses busybox for getting mount path
    Updated Windows ADB to latest version (I'll update the Mac/Linux ones next build)

    v1.5.5
    Unroot uninstalls Superuser from /data/app
    Returned installation of Superuser to /system/app

    v1.5.4
    Fixed superuser install issue
    Added a prompt to tell you to allow superuser on your phone, for the test.
    Fixed unroot.

    v1.5.3
    Fixed ADB-pushing problem

    v1.5.2
    Administrative rights in Windows Vista/7 are automatically requested.
    Fixed the settings.db search. (Tries default two locations, then uses busybox is all else fails).
    Set Superuser to install (to data/apps) instead of copy to /system/apps. You can manually remove it from your phone like any other app. (You can also update it with the Market).
    Fixed NMA not working if you didn't have Shell Root


    v1.5.1
    Untested Mac and Linux support (you need Mono)

    v1.5
    Fixed Non Market Apps
    Added Unroot
    Added separate Shell Root (rageagainstthecage) button
    Lots of internal code clean up.

    v1.4
    Changed main form's name to SuperOneClick from RageAgainstTheCageGUI
    Enabled Captivate - Get Unlock Code button
    Added a messagebox to confirm if Non Market Applications are enabled
    Made "Enable Non Market Apps" FULLY universal
    Added initial message telling you to remember to allow superuser commands (when enabling Non-Market Apps)

    v1.3
    Removed busybox for space reasons. Changed the layout. Fixed issue where application stayed running in the background. Added Non Market App button.

    v1.2
    Added a detection to see if RATC was already working.

    v1.1
    Universal device support. Application now finds your /system path.

    v1.0
    Initial release.

    Development Plan:




    Scheduled for next major release
    • Linux support via mono-project
    • Add a check box to use su or rageagainstthecage for other scripts (like Enable NMA)
    • Better error handling for devices with NAND lock on /system
    • Have options show what level root is needed (0,1,2,3)

    To do list:
    • Jupiter fixes
    • Custom scripts support
    • Plugin support
    • Mac support via mono-project
    • Linux support via mono-project





    Wishlist:
    • None
    Thanks to basily, I have an Captivate v2.1 nv_data.bin I can test with to create the unlock button.
    I need a mac/linux user to help me. PM so we can chat on AIM/Google

    Courtesy of TheUnlockr.com, here's a step-by-step video:

    Mod Edit: this app will set off some anti virus software...here's a small explanation by pulser_g2:

    rageagainstthecage is a root exploit via a fork bomb.

    It IS a potentially malicious payload, BUT it is being used with owner's consent to root the phone.

    The DreamDroid malware use exactly same payload - they are trojans, but this is a helpful tool.

    It IS a dangerous tool in the wrong hands, but this is a root exploit, so you should exercise common sense and a little understanding of what it does and how it works.
    20
    For you linux users:
    To get ADB working:
    Install these libraries:
    apt-get install lib32ncurses5
    apt-get install lib32stdc++

    If you run ubuntu, see this:
    http://developer.android.com/guide/developing/device.html#setting-up

    Install Mono
    apt-get install mono

    Install WinForms 2.0 for Mono
    apt-get install libmono-winforms2.0-cil

    Mark adblinux as executable
    chmod 755 adblinux

    Open application with mono:
    For v1.5.1, it has to be launched from the same working directory as adblinux, so open terminal, browse to the folder and type
    sudo mono SuperOneClick.exe


    In the next release, I'll make sure I fix the "working directory" problem so you can just right on SuperOneClick.exe, hit "Open with other application" and select mono

    Screenshot.png
    9
    First reply!

    Thanks!!! Even I won't be needing them at the moment

    Now the next project... ability to sign the update.zip so recovery mode works!
    8
    The OP has been updated by me to indicate that this Exploit is intended for Gingerbread and older Android version devices. Since the OP of this thread has not officially been updated since January 2012, THREAD CLOSED until the thread owner notifies us to reopen it.
    8
    Couldn't have been easier. However when I launched TiB after seeing the successful ROOT message box from the unroot app, I am not rooted.

    Update to my post: ran again and Busy Box states that I am rooted.


    Thanks...

    You should reboot the phone, but I didn't want to make it mandatory. I'll add a prompt asking if you want to reboot.

    When i run this .. The GUI just hangs with a blank screen .. no errors.. if i go to task manager there are two adb.exe processes and if i force close one the GUI closes.

    Any ideas?

    Plug in a device