Please add + and - to increase/decrease brightness. It's more precise than swiping the slider.
[APP][2.3+] Lux Auto Brightness
- Thread starter Cyb3rGlitch
- Start date
Oh dear god, yes!
More than that, add a number field where you can just type the number in directly!
I can't tell you how much time I've wasted trying to get the damned slider in exactly the right position.
+1 for this suggestion too.
I'll probably give the app a try after that.
hmm. the auto brightness on my Note 3 does not seem to work as well as I would like
The volume controls on your device can control the slider.
Maybe this is obvious for people who've used Android for a while (i.e. other apps using it too), but the only reason I found out about the volume button is because I saw it in the changelog. I don't think I've seen it mentioned anywhere else (e.g. the tour/tutorial).
The way it's designed now having soft keys would at least be possible in landscape mode. You could also make the settings and night icons smaller, move down the tour and refresh icons and add soft +/- keys in both portrait and landscape.
I didn't know that. It's easier to tap on a screen than pressing on the volume.
On my phone the app doesn't show up in the list of apps consuming power, it's at 0.0%
Sent from my GT-I9505 using Tapatalk
On my phone the app doesn't show up in the list of apps consuming power, it's at 0.0%
Sent from my GT-I9505 using Tapatalk
Yes, This app doesn't consume battery and it behaves better than the built in brightness setting.
Sorry verynuclear, it of courses consumes battery, how else should it work?
But it drains battery not so much that it eats up the gain by reduced brightness. Especially in the mode "Screen on" there is only very little effect on battery.
Thats why most apps have something called settings
Sent from my GT-I9505 using Tapatalk
yeap! still tweaking and messing around with the settings
just that the default went way too bright so there was a lot more to adjust ^^
Of course it drains, I mean to say that it doesn't consume that much.
Sent from my One using Tapatalk
Lux still overrides MX player's brightness control even if added to sleep list when plug-in is enabled.
Sometimes, the brightness changes back and forth every 2 seconds with same ambient light.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
*
Hey Cyb3rGlitch would you please add tasker variables? I think it would be awesome extension for Tasker.I have already tried to set up Tasker to change my profile to 'Night' with specific condition (after*21:00 PM*with given lux level). However the %Light turns out the value only when the brightness change. Therefore it simply will not work properly if you are in complete darkness, because there is no brightness change.
If we have %Lux_brithness variable which keeps current lux value we will have a possibility to use it as a trigger in Tasker. In this case I could create the following profile:
If %Lux_brightness = 10 lx -> change profile to 'Night' (using plugin you have already done).*
Cheers,
Sent from my GT-N8010 using Tapatalk 4
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
160
Lux - The Original Android Auto-Brightness App
So I thought I should make an XDA thread for Lux, over a year after releasing it to the Play Store!
FULL or FREE
Issues/Suggestions
If you have any issues or suggestions, please add them to the public issue tracker found here. Be sure to search first, duplicated issues will not work in your favour.
News
- Update to 1.51 released to Play Store!
- Profiles. Have different behaviour for day and night!
- Root plug-ins. Custom kernel with RGB control? Make a plug-in to utilise it!
- Improved notification
- Low pass filter
- Cubic interpolation
- Polish/French/Russian/German/Italian translation
- Manual sunrise location input
- Control Dashboard slider with vol. keys
- Fade duration/step
- Reduced battery usage
- Fixes
- Update to 1.06 released to Play Store!
- Automatic night mode (uses location for sunset/sunrise).
- Notification priority
- Enhanced dashboard and notification UI
- Enable/disable and refresh Lux via Tasker
- Bug fixes
- Update to 0.76 released to Play Store!
- Fixed brightness issues after call
- Update to 0.74 released to Play Store!
- Fixed max/phone brightness preferences swapped
- Added ignore 0 lux option
- Made static phone brightness optional
- Update to 0.70 released to Play Store!
- New 'ascending' automatic mode for zero jitter!
- Expandable notification for added control (Android 4.1+)
- Improved efficiency
- Install to OS functionality
- Set min/max brightness bounds
- Adjustable night mode
- Improved persistence (Android won't kill it!)
- Fixed Nexus 7 255 luma bug
- Fixed Tasker 'on wake' revert bug
- Compat. mode is now known as 'sleep mode'
- Night Mode now default Dashboard action (hold for Astro. mode)
- Misc. tweaks and fixes.
App Description
Lux isn't your ordinary brightness app. It intelligently adjusts the brightness of your display based on the environment you're in. If, for example, you step into a dimly lit room, Lux will automatically lower the brightness of your display to make it not only comfortable to read, but to also preserve battery power.
Lux provides the option to automatically adjust the backlight at fixed intervals (periodic mode), when a change in environment is detected (dynamic mode), or when the phone wakes from sleep. It's also possible to adjust the backlight manually. Simply disable automatic mode and you can use it like a traditional brightness tool!
Perhaps the best thing about Lux is that you can teach it how to behave. If the backlight is too bright or dim for your liking, simply open the provided Dashboard, adjust the brightness slider to the level you desire, then hold the link button. Lux will use this new 'link' as a reference in future.
Give it a go! I want you to test Lux for more than the 15 minute refund period offered by Google. I understand that some devices may not have the best quality light sensor, and that you may need more time to play around with settings. If you find that Lux doesn't suit you after the 15 minutes is up, you can request a refund at any time via e-mail - no questions asked.
★FEATURES★
■ Custom auto brightness.
■ Sub-zero brightness to make reading in the dark significantly less irritating.
■ Battery efficient
■ Handy brightness widget
■ Option to use the camera to read in ambient light.
■ Power-user settings such as choice of interpolation, sensor debugging, and linked sample editing.
■ Backup to SD.
■ 'Ascending' auto mode for phones with inaccurate light sensors.
■ Gradual fade for backlight adjustments.
■ Astronomer mode adds a red filter to the screen to preserve the eyesight of stargazers.
■ Jitter control to prevent constant small changes to the backlight.
■ Automatic night mode, to change the colour temperature of the display for comfortable night time viewing.
■ Add app specific exceptions via sleep mode
■ No ads, or other nuisances.
■ Tasker and Locale support!
Note: Please disable other brightness apps before using Lux. The author is not liable for any issues caused when using this app.
★PERMISSIONS★
TAKE PICTURES AND VIDEOS: Used to read in luma values, if camera input is selected.
DRAW OVER OTHER APPS: Required for night/astro mode.
READ PHONE STATE: Required to prevent Lux from interfering with phone controls in Android 4.1.
MODIFY SYSTEM SETTINGS: Brightness is a system setting, as is toggling the default auto brightness.
RETRIEVE RUNNING APPS: Required to make the 'sleep list' functionality work, so Lux can disable itself when certain apps are in the foreground.
COARSE LOCATION: Required to automatically calculate sunrise/sunset times.
IN APP BILLING: Required for purchasing future device specific root only plug-ins, to enhance functionality.14Lux Low-Level Plug-ins
Soon Lux will support plug-ins to bypass Android API limitations. These plug-ins serve to replace the overlay system Lux uses to make adjustments for Night/Astronomer modes and brightness in general. The plug-in library is free to use for non-commercial development, and can be found here:
Lux Plug-in Library | Nexus 4 Sample Plug-in Code
How to make a plug-in
There are two approaches to making a plug-in for Lux. The passive and the active method. The former is as easy as providing a set of superuser commands for Lux to interpret and apply. These command correlate to functions such as setting pixel RGB or brightness levels. This is the type of plug-in the Nexus 4 sample linked above takes.
The active method requires you produce your own code to perform RGB/brightness adjustments. This might include importing a device specific library to do the heavy lifting, and then returning empty superuser commands back to Lux.
Getting Started
Simply import the Lux Plug-in Library source into your IDE as an Android Library Project, and then create a new Android app which extends PassiveDisplay.java.
PassiveDisplay provides hooks into Lux's plug-in framework, which you can use to provide superuser commands for Lux to execute. These commands correlate to functions such as setting RGB values. Take a look at the sample Nexus 4 project to see how it's all done.
Finally, in your new project's AndroidManifest.xml file, add the following:
Code:<activity android:name="com.vitocassisi.lux.plugin.MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <receiver android:name="com.vitocassisi.lux.plugin.LuxBroadcastReceiver" android:exported="true" > <intent-filter> <action android:name="com.vitocassisi.lux.plugin.search" /> </intent-filter> </receiver> <service android:name=".[B]MY_PLUGIN[/B]" android:exported="true" > <intent-filter> <action android:name="[B]YOUR_PACKAGE_NAME_HERE[/B]" /> </intent-filter> </service>
Be sure to replace YOUR_PACKAGE_NAME_HERE with the name of your plug-in's package, and MY_PLUGIN with your extended PassiveDisplay class.
And that's it! Now you're ready to test!
Enabling Plug-In support within Lux
To enable plug-in support, you must check 'Enable plug-in support' in the Advanced section of Lux settings. Enabling this option forfeits all responsibility of mine for any issues caused while using Lux. Plug-in's can cause very real damage to your device if they're written incorrectly - don't use plug-ins from sources you don't trust!
Testing your plug-in
Testing is critical for creating a good plug-in. You are dealing directly with system files, and can easily cause damage if you do not know what you're doing.
DO NOT RELEASE A PLUG-IN WITHOUT TESTING IT ON THE TARGET DEVICE FIRST!
Ensure that the following work with your plug-in installed:
- Astronomer Mode
- Night Mode
- General brightness adjustment
- Lux readings functional
BE METICULOUS WITH YOUR IMPLEMENTATION OF isSupportedDevice()!
Modifying system files on the wrong model/kernel may cause irreversible issues!
Licence
Code:Copyright © 2013 Vito Cassisi You may not use this library except in compliance with the following: - It cannot be used for commercial purposes under any circumstances, unless explicit permission is granted in writing from the author. - Modifications to this library may not be distributed. Unless required by applicable law or agreed to in writing, software distributed under this licence is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.11Lux v1.99.8 released (staged rollout)
- Added CF.lumen support (don't need CF.lumen active, just install the driver). Acts as a plug-in for all Android 4.4+ devices. Please buy the pro version to support his work.
- System autobrightness enabled during calls
- Option to shake at lockscreen to increase brightness
- Option to prevent drop in brightness in landscape
- Enforced persistent notification, added system removal method
- Fixed dashboard width issue
- Fixed notification priority resetting at boot
- Misc. fixes11Hey everyone. Sorry to hear that people are having issues with the paid version. I'm working on hotfixes at the moment. A lot of these bugs don't appear on my test devices, which is why regressions happen seemingly randomly. I'm working hard on finding a reliable way to reproduce and test these issues to prevent this happening again.9Apologies to everyone for not being around lately. I've been answering support via email.
A new release is rolling out on the market to 5% of users. Please use the 'Send Feedback' button in Lux preferences if you experience issues. Also, feel free to email me with any questions or concerns. - Update to 1.51 released to Play Store!
