Firmware upgrade encountered an issue and no recovery mode

Search This thread

82apl

Member
Jan 12, 2014
13
1
Houston
:crying: since two days ago, I have the same problem... I tried with ODIN and it said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


Here is the picture of what ODIN said!

Please help me out if you know what I have to do...
 

Attachments

  • 82apl.jpg
    82apl.jpg
    234.9 KB · Views: 341
  • Like
Reactions: audit13

KorGuy123

Senior Member
Sep 18, 2012
1,794
860
Barrie

audit13

Inactive Recognized Contributor
Jun 4, 2012
12,911
5,052
Toronto
I747 is the s3

Sent from my SGH-I747 using xda app-developers app

---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------

Had the same problem. Turned out to be a bad USB cable. Switched cables and it flashed perfectly.

Sent from my SGH-I747 using xda app-developers app

Next to the word Odin in the screenshot, I see i9505.
 

audit13

Inactive Recognized Contributor
Jun 4, 2012
12,911
5,052
Toronto
Thats just the init file in the folder with the Odin.exe
Chainfire has his autoroot name with his packaged Odin, it can flash anything though.

Sent from my SGH-I747 using xda app-developers app

I see. I was thinking that the incorrect firmware was used for the phone that was connected to Odin.

Thanks for the information.
 

82apl

Member
Jan 12, 2014
13
1
Houston
It's either a bad download, bad USB cable or incorrect drivers.

Re download the file. Try again.

Sent from my SGH-I747 using xda app-developers app

:( i downloaded 3 times differents firmwares... 4.3, 4.2 and 4.0.2 and nothing.... even i tried in my sister's computer... I'll do it again just to make sure... thank u very much... :angel:
 

KorGuy123

Senior Member
Sep 18, 2012
1,794
860
Barrie
:( i downloaded 3 times differents firmwares... 4.3, 4.2 and 4.0.2 and nothing.... even i tried in my sister's computer... I'll do it again just to make sure... thank u very much... :angel:

Where are you downloading them from?
What were you running before you started having problems.

Are you verifying they are the correct file size?

Sent from my SGH-I747 using xda app-developers app
 

82apl

Member
Jan 12, 2014
13
1
Houston
Where are you downloading them from?
What were you running before you started having problems.

Are you verifying they are the correct file size?

Sent from my SGH-I747 using xda app-developers app

I downloaded in http://www.sammobile.com/firmwares/2/
I was running the last version of Cyanogen, but i dont like it, and just wanted to go back.... and then, I got stock... before I put the Cyanogen, I was with SO 4.3
 

KorGuy123

Senior Member
Sep 18, 2012
1,794
860
Barrie
I downloaded in http://www.sammobile.com/firmwares/2/
I was running the last version of Cyanogen, but i dont like it, and just wanted to go back.... and then, I got stock... before I put the Cyanogen, I was with SO 4.3

OK if you were on stock 4.3 you can't flash anything but 4.3

Flashing the older firmwares will brick your device.

I'm out of options for you right now...

Sent from my SGH-I747 using xda app-developers app
 

82apl

Member
Jan 12, 2014
13
1
Houston
Yup. Just can't flash a stock firmware lower than 4.3
The lower boot loader in the lower stock versions will brick it

Sent from my SGH-I747 using xda app-developers app

I did it, and it said again:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

here is the picture!!!!
 

Attachments

  • APL.jpg
    APL.jpg
    238.7 KB · Views: 13

KorGuy123

Senior Member
Sep 18, 2012
1,794
860
Barrie


I did it, and it said again:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

here is the picture!!!!

That seems like a small file size...
My 4.3 stock rom (rooted and downloaded from here) is 1.41gig
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    :crying: since two days ago, I have the same problem... I tried with ODIN and it said:
    <ID:0/005> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/005> Odin v.3 engine (ID:5)..
    <ID:0/005> File analysis..
    <ID:0/005> SetupConnection..
    <ID:0/005> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)


    Here is the picture of what ODIN said!

    Please help me out if you know what I have to do...
    1
    Next to the word Odin in the screenshot, I see i9505.

    Thats just the init file in the folder with the Odin.exe
    Chainfire has his autoroot name with his packaged Odin, it can flash anything though.

    Sent from my SGH-I747 using xda app-developers app