OnePlus 7 Pro / OnePlus 7 Pro 5G / OnePlus 7
The only fully unified kernel for OOS and CUSTOM ROMs
Concept
Flash and be happy out of the box!
The kernel provides 4 Spectrum profiles and 3 Franco Kernel Manager profiles (Pie only) for most usecases. Balanced / Battery / Performance (default) / Gaming. For choosing another profile as Balanced please install Spectrum from the Google PlayStore.
If you want to modify the profiles just run a kernelmanager like EX Kernelmanager and change what you want.
To preconfigure the kernel uses a config file made by well known Senior member @xXx
These are the tunables you could modify:
Defaults in [ ]
Profiles battery, balanced, [performance], gaming
SELinux [permissive] / enforced
CPU minimum frequency little [300], 403, 499, 576, 672, 768
CPU minimum frequency big [825], 948, 1056
CPU minimum frequency prime [825], 948, 1056, 1171
GPU minimum frequency [257], 345
GPU Input boost off [345], 427
GPU maximum frequency up to 850 MHz (comes with 585 stock frequenccy set!)
etc.
!!! WARNING !!! 675, 735 and 850 MHz are GPU OC frequencies and NOT stable on all devices!
The SmurfKernel configuration file is placed in /sdcard/SmurfKernel: If you want to use the kernel with it's default configuration just flash it!!! For custom changes please edit the SmurfKernelConfigurationEditor by @tanish2k09. The settings are applied saving the config. Your actual configuration is written to smurf.kernel.bootlog.
It's recommended to use my kernel paired with
xXx NoLimits thread
Telegram channel
Features
OP7 Pro 5G support
OOS and CUSTOM ROM support
UNIFIED
GPU OC up to 850 MHz
CPU minimum 300-768 MHz
GPU Input boost (off / 345 / 427 MHz)
Adrenoboost
Klapse Livedisplay 5.0 by @tanish2k09
Scheduling mechanisms PELT / WALT
Dynamic stune boost
Devfreq boost
Devfreq boost DDR
Devfreq boost GPU
Input stune boost extender
High / Medium / Low boost presets
Multiqueue io-scheduler: mq-deadline, bfq-mq, kyber
Singlequeue io-scheduler [Anxiety], bfq-sq, cfq, noop, fiops, sio, etc.
Dynamic fsync
Advanced color control (RGB, hue, saturation, contrast)
Backlight dimmer
Adjust vibration
Wake gestures
Wakelock blocker
Wireguard
IPtables TTL
Linux 4.14.182
CAF upstreamed LA.UM.7.1.r1-16600-sm8150.0 / LE.UM.4.1.1-00610-SDX55
Spectrum and FK profiles support
Information about Klapse Livedisplay
Governor
smurfutil
schedutil
IO-scheduler
Multiqueue:
mq-deadline
bfq-mq
kyber (defualt)
Singlequeue:
anxiety (default)
bfq-sq
noop
deadline
cfq
fiops
sio
zen
maple
CPU / GPU
adreno boost
touch and input boost
dynamic stune boost
dynamic multi level stune boost
GPU input boost
Input boost stune extender
Misc
dynamic fsync
850 MHz GPU maximum clock
advanced tcp congestion algorithms
power efficient workqueues switchable
Boeffla wakelock control
Gestures
DT2W
sweep2sleep and wake
vibration control
Installation
Just flash!
Reboot to TWRP and flash if you're already on SmurfKernel.
You can flash the kernel using TWRP
If you need to flash Magisk, flash it before flashing the kernel.
Coming from stock kernel, or any other kernel it is recommended to flash kernel, magisk, kernel.
If you encounter a ramdisk update error please reflash TWRP, magisk, reboot TWRP and flash magisk, kernel.
Download
GoogleDrive folder
MEGA folder
Bootanimations
Flash as Magisk module ;-)
Bootanimation 1
Bootanimation 2
View attachment 4780406
Bootanimation 3
Bootanimation 4
All credits for these awesome bootanimations go to @JJay666, Pas and @Duncan1982
Contributors
Pappschlumpf
Source
https://github.com/pappschlumpf/SmurfKernelOP7
Version Information
Status: Stable
Current Stable Version: V2.6.0
Stable Release Date: 2019-08-02
Many many many thx to all OP6 / 6T users that made buying this device possible with their donations. An awesome community !!!
Credits
@DespairFactor for his great base
@nathanchance for this great reference
@flar2
@tbalden
@ZeroInfinity for great pwrutilx governor
Joe Maples for electroutil
Team Helix for the great helix_schedutil governor
@difr for SimpleSpectrum
@frap129 for original Spectrum
@Tkkg1994 for always being so helpful
@DroidShift79 for the outstanding logo picture!
and all other great kernel devs on xda
XDA:DevDB Information
[KERNEL][GPU OC][OOS] SmurfKernel 3.5.4, Kernel for the OnePlus 7
Contributors
pappschlumpf
Source Code: https://github.com/pappschlumpf/SmurfKernelOP7
Kernel Special Features: GPU OC, GPU Input boost, CAF upstreamed, Linux upstreamed
Version Information
Status: Stable
Current Stable Version: 3.5.4
Stable Release Date: 2020-05-28
Created 2019-06-12
Last Updated 2020-05-28
Concept
Flash and be happy out of the box!
The kernel provides 4 Spectrum profiles and 3 Franco Kernel Manager profiles (Pie only) for most usecases. Balanced / Battery / Performance (default) / Gaming. For choosing another profile as Balanced please install Spectrum from the Google PlayStore.
If you want to modify the profiles just run a kernelmanager like EX Kernelmanager and change what you want.
To preconfigure the kernel uses a config file made by well known Senior member @xXx
These are the tunables you could modify:
Defaults in [ ]
Profiles battery, balanced, [performance], gaming
SELinux [permissive] / enforced
CPU minimum frequency little [300], 403, 499, 576, 672, 768
CPU minimum frequency big [825], 948, 1056
CPU minimum frequency prime [825], 948, 1056, 1171
GPU minimum frequency [257], 345
GPU Input boost off [345], 427
GPU maximum frequency up to 850 MHz (comes with 585 stock frequenccy set!)
etc.
!!! WARNING !!! 675, 735 and 850 MHz are GPU OC frequencies and NOT stable on all devices!
The SmurfKernel configuration file is placed in /sdcard/SmurfKernel: If you want to use the kernel with it's default configuration just flash it!!! For custom changes please edit the SmurfKernelConfigurationEditor by @tanish2k09. The settings are applied saving the config. Your actual configuration is written to smurf.kernel.bootlog.
It's recommended to use my kernel paired with
xXx NoLimits thread
Telegram channel
Features
OP7 Pro 5G support
OOS and CUSTOM ROM support
UNIFIED
GPU OC up to 850 MHz
CPU minimum 300-768 MHz
GPU Input boost (off / 345 / 427 MHz)
Adrenoboost
Klapse Livedisplay 5.0 by @tanish2k09
Scheduling mechanisms PELT / WALT
Dynamic stune boost
Devfreq boost
Devfreq boost DDR
Devfreq boost GPU
Input stune boost extender
High / Medium / Low boost presets
Multiqueue io-scheduler: mq-deadline, bfq-mq, kyber
Singlequeue io-scheduler [Anxiety], bfq-sq, cfq, noop, fiops, sio, etc.
Dynamic fsync
Advanced color control (RGB, hue, saturation, contrast)
Backlight dimmer
Adjust vibration
Wake gestures
Wakelock blocker
Wireguard
IPtables TTL
Linux 4.14.182
CAF upstreamed LA.UM.7.1.r1-16600-sm8150.0 / LE.UM.4.1.1-00610-SDX55
Spectrum and FK profiles support
Information about Klapse Livedisplay
Governor
smurfutil
schedutil
IO-scheduler
Multiqueue:
mq-deadline
bfq-mq
kyber (defualt)
Singlequeue:
anxiety (default)
bfq-sq
noop
deadline
cfq
fiops
sio
zen
maple
CPU / GPU
adreno boost
touch and input boost
dynamic stune boost
dynamic multi level stune boost
GPU input boost
Input boost stune extender
Misc
dynamic fsync
850 MHz GPU maximum clock
advanced tcp congestion algorithms
power efficient workqueues switchable
Boeffla wakelock control
Gestures
DT2W
sweep2sleep and wake
vibration control
Installation
Just flash!
Reboot to TWRP and flash if you're already on SmurfKernel.
You can flash the kernel using TWRP
If you need to flash Magisk, flash it before flashing the kernel.
Coming from stock kernel, or any other kernel it is recommended to flash kernel, magisk, kernel.
If you encounter a ramdisk update error please reflash TWRP, magisk, reboot TWRP and flash magisk, kernel.
Download
GoogleDrive folder
MEGA folder
Bootanimations
Flash as Magisk module ;-)
Bootanimation 1
Bootanimation 2
View attachment 4780406
Bootanimation 3
Bootanimation 4
All credits for these awesome bootanimations go to @JJay666, Pas and @Duncan1982
Contributors
Pappschlumpf
Source
https://github.com/pappschlumpf/SmurfKernelOP7
Version Information
Status: Stable
Current Stable Version: V2.6.0
Stable Release Date: 2019-08-02
Many many many thx to all OP6 / 6T users that made buying this device possible with their donations. An awesome community !!!
Credits
@DespairFactor for his great base
@nathanchance for this great reference
@flar2
@tbalden
@ZeroInfinity for great pwrutilx governor
Joe Maples for electroutil
Team Helix for the great helix_schedutil governor
@difr for SimpleSpectrum
@frap129 for original Spectrum
@Tkkg1994 for always being so helpful
@DroidShift79 for the outstanding logo picture!
and all other great kernel devs on xda
XDA:DevDB Information
[KERNEL][GPU OC][OOS] SmurfKernel 3.5.4, Kernel for the OnePlus 7
Contributors
pappschlumpf
Source Code: https://github.com/pappschlumpf/SmurfKernelOP7
Kernel Special Features: GPU OC, GPU Input boost, CAF upstreamed, Linux upstreamed
Version Information
Status: Stable
Current Stable Version: 3.5.4
Stable Release Date: 2020-05-28
Created 2019-06-12
Last Updated 2020-05-28
Last edited: