Official 5.0 Firmwares For Galaxy Note 3 (Snapdragon) (SM-N9005)
Firmware Information:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Taiwan (For Unlocked Phones)
Version: Android 5.0
Changelist: 5502149
Build date: Tue, 25 Aug 2015 10:16:28 +0000
Product code: BRI
PDA : N9005ZSUGOH3
CSC : N9005OZSGOH3
Rom Size: 1.33 Gb
Instructions :
If you have problems installing this rom, this video tutorial is for you.
Download Links:
Click on the links below to download this official firmware:
Important Note:
If you come from Kitkat 4.4.2 rom, it is highly recommend to make a Factory Reset:
After flashing the firmware, Go to Settings. Then, go to the General tab. Click on Backup and reset, then Factory data reset, then RESET DEVICE. Because all of the codes in Android has changed in lollipop, and factory reset, will make it work smoothly and wihout any problems.
BE CAREFUL, YOU WILL LOSE ALL DATA ON YOUR PHONE. BACK UP EVERYTHING FIRST.
Pit File:
if some one comes from leaked lollipop rom, this pit file is for him/her.
This file makes the system partition large enough to accept the rom.
if you come from official 4.4.2 kitkat rom, so you won't need this!
Download Pit File
Other Firmwares & Download Links:
------------------------------------------------------------------------------------
Thanks to henklbr & thereassaad for download links.
Thanks to android.zealot.fervor for sending tutorial video.
Thanks to DeuXGod for sending pit file.
Thanks to Eversmile for giving me a good suggestion.
Thanks Phonearena for mentioning my name.
(If you find my post useful please push the "Thanks" button)
Firmware Information:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Taiwan (For Unlocked Phones)
Version: Android 5.0
Changelist: 5502149
Build date: Tue, 25 Aug 2015 10:16:28 +0000
Product code: BRI
PDA : N9005ZSUGOH3
CSC : N9005OZSGOH3
Rom Size: 1.33 Gb
Instructions :
- Extract (unzip) the firmware file
- Download Odin v3.09
- Extract Odin zip-file
- Open Odin v3.09
- Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add the firmware file to AP / PDA
- Make sure re-partition is NOT ticked
- Click the start button, sit back and wait a few minutes
If you have problems installing this rom, this video tutorial is for you.
Download Links:
Click on the links below to download this official firmware:
Important Note:
If you come from Kitkat 4.4.2 rom, it is highly recommend to make a Factory Reset:
After flashing the firmware, Go to Settings. Then, go to the General tab. Click on Backup and reset, then Factory data reset, then RESET DEVICE. Because all of the codes in Android has changed in lollipop, and factory reset, will make it work smoothly and wihout any problems.
BE CAREFUL, YOU WILL LOSE ALL DATA ON YOUR PHONE. BACK UP EVERYTHING FIRST.
Pit File:
if some one comes from leaked lollipop rom, this pit file is for him/her.
This file makes the system partition large enough to accept the rom.
if you come from official 4.4.2 kitkat rom, so you won't need this!
Download Pit File
Other Firmwares & Download Links:
Thanks to henklbr & thereassaad for download links.
Thanks to android.zealot.fervor for sending tutorial video.
Thanks to DeuXGod for sending pit file.
Thanks to Eversmile for giving me a good suggestion.
Thanks Phonearena for mentioning my name.
(If you find my post useful please push the "Thanks" button)
Last edited:
