[ROM] ▒▒▒▒▒ New Custom SPVRom Firmware for ATIV-S ▒▒▒▒▒

spavlin · Feb 21, 2016

Two editors:

• Based on Product Version (RS)
• Based on Enginer version (MMC) - can download the Mass Storage

OS :
• 10.0.15254.547.....Production Release
• 10.0.15254.575.....Production Release

The changes:
• Windows 10 Mobile Enterprise
• Interop Unlock
• ID_CAP Unlock
• Full access to the files via USB
• Removed Bing application and Samsung
• Replaced CSCMgr a version of GDR3
• Added Russian keyboard and voice
• Many different tweaks
• NdtkSvc.dll for support Nokia Registry Editor
• AcerSystemService
• Microsoft.MS_TSHELL.MSN.MainOS (cmd, bcdedit, ...)
• Increased pagefile
• Added .NET 1.6-2.2

Firmware can be found here:
https://mega.nz/#F!LMkRiDpA!r3d_8JcjBOduNpfA3ou3gA

After flashed to do Hard Reset

Activating Mass Storage (for MMC):
1. Flash firmware *_MMC.wp8 +mbn
2. Flash #MassStorage.wp8 ( DL option - all - First Run ), not #MassStorage2.wp8
3. Reboot & Load MassStorage
4. Second Run MassStorage - Flash #MassStorage.wp8 ( DL option - Select )
To enable Mass Storage is necessary every time flashing #MassStorage.wp8.
To exit a long holding down POWER. NEEDED SMD_Downloader_v3.47
View attachment 3654803 View attachment 3718318

Launch EFI (for MMC):
To start the EFI-party files (possibly MassStorage), you must copy the appropriate file in the C: \ EFIESP \ Windows \ System32 \ Boot renaming it ffuloader.efi (bootarm.efi). Upload from down the VOL +.

reksden · Feb 21, 2016

@spavlin your firmware can update to 10?
windows 10 mobile available via insider . good)
твою прошивку можно обновить до 10, или надо ждать прошивку с 10 windows?

spavlin · Feb 25, 2016

Added 8.10.14234.375 Root unlocked witch WP Internals

florin_stann · Feb 27, 2016

got stuck at logo screen, after a few boot loops. i flashed 15153.165.

after many minutes of being stuck, it just restarts and goes back to logo.

spavlin · Feb 27, 2016

florin_stann said:
got stuck at logo screen, after a few boot loops. i flashed 15153.165.

After flashed to do Hard Reset

florin_stann · Feb 27, 2016

spavlin said:
After flashed to do Hard Reset

understand. i thought you meant from within windows, but you mean from hardware buttons. thank you, spavlin

reksden · Feb 27, 2016

florin_stann said:
understand. i thought you meant from within windows, but you mean from hardware buttons. thank you, spavlin

reset did when you first start

florin_stann · Feb 27, 2016

Have done the hard reset and works like a charm. Pretty quick too and i have to say i love the resolution and the 5 tiles in the notification centre

spavlin · Feb 29, 2016

Added 10.0.10586.107

ngame · Mar 1, 2016

spavlin said:
Added 10.0.10586.107

Is it possible to release with Root unlock too ?

spavlin · Mar 1, 2016

ngame said:
Is it possible to release with Root unlock too ?

Of course, once Heathcliff74 make support
Windows Phone Internals latest version W10M

lapincube · Mar 3, 2016

Hi,

thanks for your work !

If i understand, it's possible to flash your 10.0.10586.107 ROM on Ativ S ?

Is there any known issue to use W10M on Ativ S ? Is it possible to revert back to W8.1 with Odin for example ?

What's the difference between "Based on Product Version (RS)" and "Based on Enginer version (MMC)" ?

Thanks

ngame · Mar 4, 2016

lapincube said:
Hi,

thanks for your work !

If i understand, it's possible to flash your 10.0.10586.107 ROM on Ativ S ?

Is there any known issue to use W10M on Ativ S ? Is it possible to revert back to W8.1 with Odin for example ?

What's the difference between "Based on Product Version (RS)" and "Based on Enginer version (MMC)" ?

Thanks

Only known issue on my ATIV S is some reboots (but I had this problem on 8.1 too on w10 mobile these reboots are less than 8.1 for me)
and there's another issue that when I press power key some times the screen don't show anything you have to lock phone again and press power again this time screen appears .
Anyway ,W10M is very nice on W10M trust me

lapincube · Mar 4, 2016

ngame said:
Only known issue on my ATIV S is some reboots (but I had this problem on 8.1 too on w10 mobile these reboots are less than 8.1 for me)
and there's another issue that when I press power key some times the screen don't show anything you have to lock phone again and press power again this time screen appears .
Anyway ,W10M is very nice on W10M trust me

Nice, i will try

So is there an howto to flash that build ? I don't want to make a mistake and brick my phone

subaru · Mar 4, 2016

SPV_10.0.10586.122_MMC.wp8 and which .csc ??

CeeJay1337 · Mar 6, 2016

Do the hardware keys cause vibrate in WM10 with this ROM?
My main annoyance atm with WM10 + ATIV S via Registy hacks

spavlin · Mar 13, 2016

spavlin · Mar 22, 2016

Update
10.0.10586.164 Release

lapincube · Mar 22, 2016

spavlin said:
Update
10.0.10586.164 Release

Hi Spavlin,

thx for your work but i have some questions for you.

I'm actually on 8.10.14219341 with FW 2424.15.3.2, can i flash directly SPV_W10M_Release_MMC ?

With SMD 3.47, is my config good before starting to flash (see attachment) ?

Yellow folder : SPV_W10M_Release_MMC.wp8
Green folder : SPV_DOC2.mbn

If i want to rollback, i just need to flash back an original rom ?

Thx

ceesheim · Mar 23, 2016

To answer a few questions here.
Yes you can normally flash the windows10mobile rom using the normal flastool (3.47) (ignore the yellow blocks)

But there are a few things you need to know about that.
Don't ask me about the Samsung IO drivers because they are a pain in the butt ,took me 4 hours to get that to work , the rest is easy like h***

First, after flash your phone will get a blue schreen ☺
Fix is to hard reset the phone using the button combo , but for me that didn't go well.
What did work for me was to but the phone back in download mode and then flash the Storage mode image (this will actually hard reset the phone for you with the gears screen) , at first when you do that don't freak out (flashtool gives connection error, after flashing phone reboots)
Now lots of stuff happens on the screen , ignore that.
Now get yourself a coffee and sit back and wait ☺
After about 10 minutes your phone boots normal and first install starts.

What all works , try it yourself ☺ but for me its running better then WP 8.1. (camera works just normal)
And yes no haptic feedback on the back button and search button

[ROM] ▒▒▒▒▒ New Custom SPVRom Firmware for ATIV-S ▒▒▒▒▒

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

New member

Senior Member

New member

Senior Member

New member

Senior Member

Attachments

Senior Member

New member

Attachments

Retired Forum Moderator

Similar threads

Top Liked Posts