[ROM][L900]Official Nightlies CM11.0[KTU84P][4.4.4]

Search This thread

sbrissen

Inactive Recognized Developer
Sep 27, 2010
1,009
5,133
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

PreReqs: Unlocked Bootloader

INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 2 L900, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot

BUG LIST
-BT Voice Search

[Nightlies] http://download.cyanogenmod.org/?device=l900

[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads

Sources http://github.com/CyanogenMod
 
Last edited:

nym27jrey

Senior Member
Sep 29, 2012
131
23
Sweet!!!!! Getting the N5 soon but def flashing this rom on my Note 2. Thanks alot!
 

DarkManX4lf

Senior Member
May 11, 2007
3,778
488
NYC
I cannot seem to get data working on 3g evdo. Everything else works (4g lte, 1x, wifi, 3g ehrpd).

Here are some images of about phone > status

yqehere8.jpg


ymabupa7.jpg


a7eduvu7.jpg


As you can see, I get mobile network state disconnected, when on evdo.

I'll try to get logs tomorrow.
 
  • Like
Reactions: japugh0578

bodi524

Senior Member
Apr 10, 2010
470
448
Google Pixel 3 XL
I get "no such file or directory" error if I try to use this to turn off the backlights. It worked in CM 10.2. Any other way...or something I am missing?

echo "1" > /sys/class/sec/sec_touchkey/force_disable (in terninal to turn off)

echo "0" > /sys/class/sec/sec_touchkey/force_disable (in terninal to turn on)


Sent from my SPH-L900 using Tapatalk
 

Dariste

Member
Dec 25, 2010
29
2
I can only get 4G, but it always says no service sprint. For mobile network state it just says "disconnected" and Service state is "Out of service" Even with 4G turned off I don't get any signal besides wifi. Otherwise rom is slick as ****
 
Last edited:

saboture

Senior Member
Jul 25, 2009
419
142
33
Charleston, WV
Samsung Galaxy Z Fold2
Can anyone confirm flashing this rom breaks sound? I flashed CWM, flashed this rom with gapps, booted up and got no sound at all. I'd previously had working sound on my AOSPA3+ rom moments before. I reflashed TWRP and restored my nandroid, and still have no sound. No matter what wipe or rom I flash my sound is broke. Anyone have this same issue?
 

altimuh

Senior Member
Feb 8, 2011
359
86
Word. Guess my phone decided to die randomly then. Thanks. :D

Did you verify md5? Maybe you got a bad download?

Did you try wiping everything (mount and wipe system, factory reset)? And then flashing again?

If those didn't help maybe flashing to stock and starting over again (I just had something weird on CM10.2 with my data that forced me to go stock and do a hands free activation to alleviate the mess)

It ain't bricked until it's bricked!! lol :good:
 
  • Like
Reactions: iELTE

Dariste

Member
Dec 25, 2010
29
2
not sure if its related or not but even on my old 4.3 rom and even my 4.1 touchwiz room isn't working. Phone is just listed as out of service...
 

Top Liked Posts

  • There are no posts matching your filters.
  • 65
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    PreReqs: Unlocked Bootloader

    INSTRUCTIONS
    First time installing CyanogenMod 11.0 to your Galaxy Note 2 L900, or coming from another ROM:
    - Read known issues ans FAQs
    - Flash the latest official ClockworkMod-Recovery
    - Copy GApps and CM11.0 ZIPs to your SDCard
    - Boot into Recovery
    - Flash CM11.0 zip from SDCard
    - Flash GApps zip from SDCard
    - DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
    - Reboot
    - Don't restore system data using Titanium Backup!
    - Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

    Upgrading from earlier version of CyanogenMod 11.0:
    - Copy CM11.0 ZIP to your SDCard
    - Boot into Recovery
    - Flash CM11.0 zip from SDCard
    - Reboot

    BUG LIST
    -BT Voice Search

    [Nightlies] http://download.cyanogenmod.org/?device=l900

    [GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads

    Sources http://github.com/CyanogenMod
    16
    new build up
    15
    new build up!
    14
    Almost there. Accelerometer, light, gyro, barometer, and prox sensors are working. Need to fix gravity, linear accel, magnetic, and orientation. :)

    Sent from my SCH-I605 using xda app-developers app
    12
    bigbiff said:
    Ask the rom maintainer to fix the contexts in the zip so when we load them, we set them right copying files to system and data.

    bigbiff found the reason why we're losing the radio. Running "restorecon -R /system" will restore the radio within 30 seconds, without a reboot. You'll need to mount /system as rw first though.

    To make it easier, I made a flashable ZIP. It will try to run restorecon in recovery (this part seems to only work in CWM), and it will also copy "fixradio" to /system/bin. If the radio still doesn't work after flashing, boot up, start Terminal and type "su" press enter, then type "fixradio" and press enter. Within 30 seconds your radio should be back.

    Fixes clean installs and nandroids on both TWRP and CWM.