[ROM] [KITKAT] [STABLE] CyanogenMod 11 for Galaxy Ace 3 LTE (GT-S7275) (EOL)

Status
Not open for further replies.
Search This thread

kotzir

Inactive Recognized Developer
Jul 9, 2013
1,421
4,007
Thessaloniki
Xiaomi Mi 8
Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms :D

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

All you questions here: Q&A! This is a development Thread

BUGS
-NFC
-If using OTG reboot after finishing using it, because a wakelock occurs
-You might have random reboots sometimes

WORKING
-Everything Else!

Code:
Link to the cwm recovery needed: [url]http://d-h.st/pak[/url]

Code:
Latest Release is [COLOR="Red"]20160820[/COLOR]!
[URL="https://www.androidfilehost.com/?fid=24591000424956016"]Download[/URL]

Screenshots

Screenshot_2014-08-04-20-47-37.png
Screenshot_2014-08-04-20-47-44.png
Screenshot_2014-08-04-20-47-58.png
Screenshot_2014-08-04-20-48-01.png
Screenshot_2014-08-04-20-48-18.png
Screenshot_2014-08-04-20-49-05.png
Screenshot_2014-08-04-20-48-08.png
Screenshot_2014-08-04-20-48-32.png


INSTALLATION
Enter download mode (Volume Down + Home + Power Button)
Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
when finished press and hold Vol Up + Home + Power Button to enter recovery mode without turning off the device
Wipe data factory reset
Install zip from sdcard/extsdcard --> choose zip from sdcard/extsdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
Reboot system now


Code:
            ENABLE ART(need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART 
7. Reboot into Recovery
8. Flash Gapps
9. Reboot

Code:
If you experience problems with wi-fi:
All you have to do is to set country code to your country in Wi-Fi settings

If you experience problems with any external applications try switching from ART to DALVIK before asking or sending a private message

If you have random reboots, this is the solution that is reported to solve the problem, thanks @mohamed786

All the builds will be hosted here: Download
***Mirroring my ROM and builds is not appreciated***


Thanks list
@arco68
@TheWhisp
@mir3k
@Rox
@faux123
@CM team of course,
without all this help and contribution, I wouldn't have done almost anything
*If I forgot someone, excuse me, send me a pm, and I will add you :)
Donate to those guys if you can. They helped me a lot, especially arco :)

Official facebook page: Page

Code:
Releases:
[COLOR="Red"]-20160820-[/COLOR]
*CM sources update
*August security patch level
*Kernel: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands (CVE-2016-5829)
*Kernel: net: ipc_router: Bind only a client port as control port (CVE-2016-2059)
*Kernel: msm: kgsl: Defer adding the mem entry to a process (CVE-2016-2504)
*Kernel: ashmem: Validate ashmem memory with fops pointer (CVE-2016-5340)
*Kernel: msm: board-8930-pmic: Remove PMIC LED driver
*Kernel: msm: Fix bus vector for DFAB clk setting
[COLOR="Red"]-20160107-[/COLOR]
*CM sources update
*Latest android security patch level(2016-01-01)
[COLOR="Red"]-20151113-[/COLOR]
*CM sources update
*More security patches brought by Cyanogen
[COLOR="Red"]-20151110-[/COLOR]
*CM sources update
*Security patches from Cyanogen
*rootdir: init.target.rc: update sensors from stock ramdisk
*rootdir: Remove read ahead tunings
[COLOR="Red"]-20150824-[/COLOR]
*Include custom Kernel
*Kernel: Re-implemented kexec hardboot
*Kernel: Fixed last_kmsg
[COLOR="Red"]-20150814-[/COLOR]
*CM sources update
*Patches for stagefright vulnerability
*Kernel: Support for kexec hardboot
*Kernel: Add Fiops i/o scheduler
*Kernel: Add smartmax_eps cpu governor
[COLOR="Red"]-20150701-[/COLOR]
*CM sources update
*Fix compass
*Cleanup init.qcom.power.rc for unnecessary stuff
*Update interactive governor values
*Kernel: Misc patches
[COLOR="Red"]-20150501-[/COLOR]
*CM sources update
[COLOR="Red"]-20150424-[/COLOR]
*CM sources update
*Remove hdpi from PRODUCT_AAPT_CONFIG
*Disable cpu.notify_on_migrate feature
*Enable mpdecision by default
*Kernel: Misc patches
[COLOR="Red"]-20150324-[/COLOR]
*CM sources update
*Web security patches applied
*Kernel:Misc patches
[COLOR="Red"]-20150320-[/COLOR]
*CM sources update
*Remove setting permissions for non-existent fmradio dev
*Enable separated headset mic
*Update snd_soc_msm_2x 
*Drop NFC support
*Kernel: Avoid some memleaks
*Kernel: Misc patches
[COLOR="Red"]-20150312-[/COLOR]
*CM sources update
*Revert: "Move custom AAPT config to cm.mk"
[COLOR="Red"]-20150308-[/COLOR]
*CM sources update
*msm8930-common: camera: Modify base.common.version API define
*Re-enable QCOM's HW AAC encoder
*Kernel: Fix QCOM's HW AAC encoder
*Revert "rootdir: Create native cgroup"
[COLOR="Red"]-20150305-[/COLOR]
*CM sources update, mostly translations
*Fixed camcorder
[COLOR="Red"]-20150228-[/COLOR]
*Enable QCOM's HW AAC encoder"
*Disable LPA
*Set default country index to Europe in FM app
*Create native cgroup
*Move custom AAPT config to cm.mk
*Kernel: Tune voltage table
*Kernel: Misc patches
[COLOR="Red"]-20150219-[/COLOR]
*CM sources update
*Kernel: Re-add intelliactive cpu governor
*Kernel: Re-add sio i/o scheduler
*Kernel: Probably fixed random reboots
*Kernel: eCryptfs: Remove buggy and unnecessary write in file name decode routine
*Kernel: Νetfilter: conntrack: disable generic tracking for known protocols
[COLOR="Red"]-20150120-[/COLOR]
*CM sources update
*Revert: Remove chmod of /proc/cmdline
*Kernel: Optional overclock up to 1.7GHz
*Kernel: Update intelli_plug to v3.9
*Kernel: Add intellimm cpu governor
*Kernel: Misc patches
*Fix encryption after factory reset
[COLOR="Red"]-20150102-[/COLOR]
*CM sources update
*Disable QCOM's HW AAC encoder
*Disable audio offload
*Update media_profiles
*Fix: Now audio from videos plays on both sides of headphones/speaker
[COLOR="Red"]-20141225-[/COLOR]
*CM sources update
*Don't show mobile plan preference
*Load fastrpc module after boot 
*Minor cleanup in init.carrier.rc
*Move wcd9310 symlink creation to msm8930-common
*msm8930-common:Create wcd9310 symlinks during build process
*Enable smooth-streaming video-playback
*Don't mount persdata
*Revert: Enable large heap for Trebuchet
*Minor kernel patches
[COLOR="Red"]-20141205-[/COLOR]
*CM sources update
*Remove qrngd service 
*Add SettingsProvider
*Update ueventd.qcom.rc 
*Minor cleanup of init.qcom.rc 
*Enable large heap for Trebuchet
*Fix hostapd service to use correct config folder
*Remove chmod of /proc/cmdline
*Change NTP_SERVER in gps.conf to use izatcloud 
*Set default locale to en_UK
*Remove obsolete option 
*msm8930-common:Cut EGL cache size in half
*msm8930-common:Define correct path to hostapd files
*msm8930-common:Some camera wrapper cleanup and changes 
*msm8930-common:Disable CCX support in Prima config 
*msm8930-common:Remove unused option from camera makefile
*Many kernel patches
[COLOR="Red"]-20141125-[/COLOR]
*CM sources update
*Increase read ahead to 512KB
*Revert: Enable face detection
*Revert: Change ADCBID for PROXY Rx
*Revert: Loganre: Enable proximity wake option
*Disable interactive governors sync_freq feature
*Add back couple of missing lines in media_codecs.xml
*Disable wpa_supplicant log spam 
[COLOR="Red"]-20141115-[/COLOR]
*CM Sources update
*Added Binaries for IPv6 tethering
*Fixup input paths
*Removed Fauxsound, it caused calling bug
*Fixed FM Radio
*Updated media codecs
[COLOR="Red"]-20141112-[/COLOR]
*CM Sources update
*Use bottom mic for speaker phone 
*Change ACDBID for PROXY Rx 
*Enable face detection
*Audio config improvements
*Fixed audio playback
*Wlan: prima: Sync with kk_2.7
*Milestone M12 release
[COLOR="Red"]-20141107-[/COLOR]
*CM sources update
*Ramdisk updates
*GPS config improvements
*GPS HAL improvements
*Move power management to a separate init.qcom.power.rc
*Revert:add VR headset to use case, it was breaking mic on phone calls in my tests
*Official toolchains used
[COLOR="Red"]-20141102-[/COLOR]
*CM sources update
*Kernel: Reduced max OC for both CPU(1.5GHz) and GPU(475MHz) for safety
*fixed "com.qualcomm.timeservice has stopped"
[COLOR="Red"]-20141101-[/COLOR]
*CM sources update
*fstab updates, now you can mount USB-OTG without a 3rd party app (EXT4 filesystem tested)
*re-enabled triple framebuffer
*audio/snd_soc_msm_2x: Add VR headset use case
*Disabled mpdecision service, we have intelliplug
[COLOR="Red"]-20141028-[/COLOR]
*CM Sources Update
*Kernel:Add Fauxsound, thanks @Paul
*Kernel:Squashed update of wifi regulatory database
*Kernel:CPUfreq Updates 
*Overlay cleanup
*Add some blobs
*Enabled GPS XTRA servers
*Camera HAL code cleanup
[COLOR="Red"]-20141023-[/COLOR]
*CM Sources Update
*Finally stock camera rotation bug is FIXED!!!, thanks Arne Coucheron, Abhisek Devkota
*Removed AGPS_USE_PSC from GPS HAL again
*Build.prop updates
*Kernel: Add GPU OC up to 627 MHz including stock frequencies this time
*Kernel: Add Intelli_plug hotplug driver as well as msm_hotplug, credits @Faux123
[COLOR="Red"]-20141020-[/COLOR]
*CM Sources Update
*Changed Network buffer sizes from stock
*Kernel: Manage Offline CPUs
*Add USB_OTG back to storage menu
*Add USB-OTG support in kernel (Needs testing, for undesired wakelocks)
*Some kernel update
*Reverted Some GPS HAL changes
[COLOR="Red"]-20141017-[/COLOR]
*CM Sources Update
*Correct cpu voltage table in kernel
*Added Underclock again up to 162 MHz
*Increased Overclock limit up to 1.7 GHz
*Removed USB-OTG from storage menu
*Device tree cleanup/update
[COLOR="Red"]-20141010-[/COLOR]
*CM Sources Update
*Revert: KSM enabled by default
*M11 milestone release
*msm8930-common: camera: Don't forcefully enable ZSL
*Add Overclock: 1.24 GHz, 1.35 GHz, 1.45 GHz
*Added SmartassV2, Intelliactive CPU governors
*Added sio and sioplus I/O governor
[COLOR="Red"]-20141007-[/COLOR]
*CM Sources Update
*Fixed Superuser settings force close
*Fixed Terminal Emulator force close
*Kernel Downgrade to 3.4.0, it should be more stable
*Kernel is built with Linaro 4.7 now
*Update Camera HAL API (arco)
-Features still present in kernel:
*Change readahead to 512kB.
*Voltage Control
*Optimize KSM
*USB Fastcharge
-Features removed from kernel(due to perfomance issues and stability):
*GPU Overclock
*GPU Optimizations
*Graphite Kernel Optimizations
*O3 Kernel Optimizations
*Cortex A15 Optimizations
[COLOR="Red"]-20141005-[/COLOR]
*CM Sources Update
*Kernel Update up to 3.4.103, thanks @F4k
*Remove useless dual sim stuff from ramdisk
*GPU Overclock up to 627 Mhz (Be careful)
*GPU Optimizations
*CPU Voltage Control (Be careful)
*Enable KSM by default
*Many, many Kernel Updates
*Graphite Kernel Optimizations
*-O3 Kernel Optimizations
*Change Kernel readahead to 512KB
*Optimize Kernel SamePage Merging
*Cortex A15 Optimizations
*Kernel compiled with Linaro 4.9.2 now
*Usb Fastcharge support
*More, more and more
[COLOR="Red"]-20141003-[/COLOR]
Changelog:
*CM Sources Update
*Fix in liblights
*Kernel was built with Sabermod 4.7.4 toolchain
*Updated Recovery (CWM 6.0.5.1)
[COLOR="Red"]-20140930-[/COLOR]
Changelog:
*CM Sources Update
*Updated Build Fingerprint From Latest Stock Rom
*Updated fstab
*Add Missing Device Permissions
*Kernel Update
*Overlay Sar Levels(Settings->About Phone->Status->SAR Levels)
[COLOR="Red"]-20140919-[/COLOR]
Changelog:
*CM sources update
*Kernel Updates
*Adreno libs update
[COLOR="Red"]-20140916-[/COLOR]
*CM sources update
*Adjustments to power HAL
*CyanogenMod M10
[COLOR="Red"]-20140913-[/COLOR]
Changelog:
*CM sources update
*Kernel Updates
*Wifi Driver Update
[COLOR="Red"]-20140910-[/COLOR]
Changelog:
*CM sources update
*Update Ramdisk
*Add Support for GT-S7275T
*Allow more background services
*msm8930: Enable triple framebuffer
[COLOR="Red"]-20140904-[/COLOR]
Changelog:
*CM sources update
*Fixed Missing Preferred Network type under Network Settings
*msm8930-common: Merge in some wifi config changes from stock KK
[COLOR="Red"]-20140903-[/COLOR]
Changelog:
*CM sources update
*Some Kernel Update
[COLOR="Red"]-20140901-[/COLOR]
Changelog:
*CM sources update
*Updated GPS config
*Fixed WMA audio files playback(Apollo couldn't play .wma files)
[COLOR="Red"]-20140831-[/COLOR]
Changelog:
*CM sources update
*Massive KitKat Blobs Update from Express 2 and Serrano
*Added missing OMX decoder
*Stability should be increased
*Reworked GPS (arco)
*Add Support for GT-S7275B
[COLOR="Red"]-20140829-[/COLOR]
Changelog:
*CM sources update
*Modified Stock Power Profiles to fit our device(corrected cpu states and more)
[COLOR="Red"]-20140827-[/COLOR]
Changelog:
*CM sources update
[COLOR="Red"]-20140823-[/COLOR]
Changelog:
*CM sources update
*Added Soft Reboot option in Reboot options
[COLOR="Red"]-20140818-[/COLOR]
Changelog:
*CM sources Update
*Fixed mic on loudspeaker while calling again
*CM sources update
[COLOR="Red"]-20140816-[/COLOR]
Changelog:
*CM sources update
[COLOR="Red"]-20140813-[/COLOR]
Changelog:
*New Kernel Config, should improve some things, thanks @arco68
*Removed SmartassV2 governor, reported to use highest frequency all the time
*CM sources update
*Device tree update from @arco68
*Added Blobs from stock ANF2 firmware, thanks @arco68
*Added Google Camera in build, camcorder lag should disappear
*Use stock ANF2 ril blobs, should improve network
*Audio improvements by @arco68
[COLOR="Red"]-20140806-[/COLOR]
Changelog:
*Probably fixed MMs again, need testing and feedback
*CM Sources Update
[COLOR="Red"]-20140801-[/COLOR]
Changelog:
*CM sources update
*Removed USB OTG due to wakelock bug
[COLOR="Red"]-20140724-[/COLOR]
Changelog:
*CM source Updates
*Fixed missing option from storage settings: Unmount SDcard
[COLOR="Red"]-20140721-[/COLOR]
*CM sources update
*Kernel Changes, now camera seems a little more stable to me
[COLOR="Red"]-20140719-[/COLOR]
Changelog:
*Voip Fix
*CM source Updates
*Kernel Sources Update
Add Dock Headset to audio policy
[COLOR="Red"]-20140716-[/COLOR]
Changelog:
*Using custom power HAL (Should improve battery)
*CM sources update
*Audio config improvements and cleanup


Code:
[URL="http://xdaforums.com/showthread.php?t=2397942"]GAPPS[/URL]

Code:
If you like it, give me a thanks :)
 
Last edited:

kotzir

Inactive Recognized Developer
Jul 9, 2013
1,421
4,007
Thessaloniki
Xiaomi Mi 8
Wifi Working

Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms :D


ROM IS BETA, fixes needed!

WORKING
Ril
Bluetooth
Data (I think there is an issue, but seems to work)
FM radio


BUGS
Camera
Wifi
NFC
Auto-rotate
You tell me

link to the cwm recovery needed: https://www.dropbox.com/s/wluzefvek281x8n/cwm-6.0.4.9-loganre.tar.md5

Link to the rom if you wanna test: https://drive.google.com/file/d/0B7Bqo5x_z18ENjl2V1hfM0pic28/edit?usp=sharing

INSTALLATION
Enter download mode (Volume Down + Home + Power Button)
Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
pull out battery when finished
Enter recovery mode (Vol Up + Home + Power Button)
Wipe data factory reset
Install zip from sdcard --> choose zip from sdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
Reboot system now


PS: I am not responsible for any damage to your device

Wifi working! Thanks mir3k from github https://mega.co.nz/#!80kh3S5A!-5UDhZ9931RS44eCVqBvvTmZ1vXcPpgvyye1smwx3MQ
 
Last edited:

kotzir

Inactive Recognized Developer
Jul 9, 2013
1,421
4,007
Thessaloniki
Xiaomi Mi 8
Answers

Hey, I have some questions.

1. For wich models is it?
2. Gapps?
3. Exactly version of Kit-Kat?
4. Who is the developer of this ROM?
5. How to enable/disable ART?

1) For GT-S7275R
2) http://www.devfiles.co/download/7m2VdVjQ/gapps-kk-20140105-signed.zip
3) Android 4.4.4
4) Device tree originaly created by @szezso , then modified a little by me and another guy from github, compiled by me and the guy from git
5) About phone --> tap 5 times on "Build number", then "Developer options" should be enabled. After that --> "Developer options" all the way down you will see "Select Runtime" tap on it and select ART, the phone will reboot
 
Last edited:

kotzir

Inactive Recognized Developer
Jul 9, 2013
1,421
4,007
Thessaloniki
Xiaomi Mi 8
You need CWM provided

1) For GT-S7275R
2) http://www.devfiles.co/download/7m2VdVjQ/gapps-kk-20140105-signed.zip
3) Android 4.4.4
4) Device tree originaly created by @szezso , then modified by a little by me and another guy from github, compiled by me and the guy from git
5) About phone --> tap 5 times on "Build number", then "Developer options" should be enabled. After that --> "Developer options" all the way down you will see "Select Runtime" tap on it and select ART, the phone will reboot

PS: you need provided CWM because mahound's cwm can't install kitkat roms
 
Last edited:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 96
    Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms :D

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    All you questions here: Q&A! This is a development Thread

    BUGS
    -NFC
    -If using OTG reboot after finishing using it, because a wakelock occurs
    -You might have random reboots sometimes

    WORKING
    -Everything Else!

    Code:
    Link to the cwm recovery needed: [url]http://d-h.st/pak[/url]

    Code:
    Latest Release is [COLOR="Red"]20160820[/COLOR]!
    [URL="https://www.androidfilehost.com/?fid=24591000424956016"]Download[/URL]

    Screenshots

    Screenshot_2014-08-04-20-47-37.png
    Screenshot_2014-08-04-20-47-44.png
    Screenshot_2014-08-04-20-47-58.png
    Screenshot_2014-08-04-20-48-01.png
    Screenshot_2014-08-04-20-48-18.png
    Screenshot_2014-08-04-20-49-05.png
    Screenshot_2014-08-04-20-48-08.png
    Screenshot_2014-08-04-20-48-32.png


    INSTALLATION
    Enter download mode (Volume Down + Home + Power Button)
    Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
    when finished press and hold Vol Up + Home + Power Button to enter recovery mode without turning off the device
    Wipe data factory reset
    Install zip from sdcard/extsdcard --> choose zip from sdcard/extsdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
    Reboot system now


    Code:
                ENABLE ART(need fresh install)
    1. Reboot into recovery mode
    2. Wipe data, cache and dalvik cache
    3. Format /system partition
    4. Flash cm11
    5. Reboot
    6. Enable ART 
    7. Reboot into Recovery
    8. Flash Gapps
    9. Reboot

    Code:
    If you experience problems with wi-fi:
    All you have to do is to set country code to your country in Wi-Fi settings

    If you experience problems with any external applications try switching from ART to DALVIK before asking or sending a private message

    If you have random reboots, this is the solution that is reported to solve the problem, thanks @mohamed786

    All the builds will be hosted here: Download
    ***Mirroring my ROM and builds is not appreciated***


    Thanks list
    @arco68
    @TheWhisp
    @mir3k
    @Rox
    @faux123
    @CM team of course,
    without all this help and contribution, I wouldn't have done almost anything
    *If I forgot someone, excuse me, send me a pm, and I will add you :)
    Donate to those guys if you can. They helped me a lot, especially arco :)

    Official facebook page: Page

    Code:
    Releases:
    [COLOR="Red"]-20160820-[/COLOR]
    *CM sources update
    *August security patch level
    *Kernel: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands (CVE-2016-5829)
    *Kernel: net: ipc_router: Bind only a client port as control port (CVE-2016-2059)
    *Kernel: msm: kgsl: Defer adding the mem entry to a process (CVE-2016-2504)
    *Kernel: ashmem: Validate ashmem memory with fops pointer (CVE-2016-5340)
    *Kernel: msm: board-8930-pmic: Remove PMIC LED driver
    *Kernel: msm: Fix bus vector for DFAB clk setting
    [COLOR="Red"]-20160107-[/COLOR]
    *CM sources update
    *Latest android security patch level(2016-01-01)
    [COLOR="Red"]-20151113-[/COLOR]
    *CM sources update
    *More security patches brought by Cyanogen
    [COLOR="Red"]-20151110-[/COLOR]
    *CM sources update
    *Security patches from Cyanogen
    *rootdir: init.target.rc: update sensors from stock ramdisk
    *rootdir: Remove read ahead tunings
    [COLOR="Red"]-20150824-[/COLOR]
    *Include custom Kernel
    *Kernel: Re-implemented kexec hardboot
    *Kernel: Fixed last_kmsg
    [COLOR="Red"]-20150814-[/COLOR]
    *CM sources update
    *Patches for stagefright vulnerability
    *Kernel: Support for kexec hardboot
    *Kernel: Add Fiops i/o scheduler
    *Kernel: Add smartmax_eps cpu governor
    [COLOR="Red"]-20150701-[/COLOR]
    *CM sources update
    *Fix compass
    *Cleanup init.qcom.power.rc for unnecessary stuff
    *Update interactive governor values
    *Kernel: Misc patches
    [COLOR="Red"]-20150501-[/COLOR]
    *CM sources update
    [COLOR="Red"]-20150424-[/COLOR]
    *CM sources update
    *Remove hdpi from PRODUCT_AAPT_CONFIG
    *Disable cpu.notify_on_migrate feature
    *Enable mpdecision by default
    *Kernel: Misc patches
    [COLOR="Red"]-20150324-[/COLOR]
    *CM sources update
    *Web security patches applied
    *Kernel:Misc patches
    [COLOR="Red"]-20150320-[/COLOR]
    *CM sources update
    *Remove setting permissions for non-existent fmradio dev
    *Enable separated headset mic
    *Update snd_soc_msm_2x 
    *Drop NFC support
    *Kernel: Avoid some memleaks
    *Kernel: Misc patches
    [COLOR="Red"]-20150312-[/COLOR]
    *CM sources update
    *Revert: "Move custom AAPT config to cm.mk"
    [COLOR="Red"]-20150308-[/COLOR]
    *CM sources update
    *msm8930-common: camera: Modify base.common.version API define
    *Re-enable QCOM's HW AAC encoder
    *Kernel: Fix QCOM's HW AAC encoder
    *Revert "rootdir: Create native cgroup"
    [COLOR="Red"]-20150305-[/COLOR]
    *CM sources update, mostly translations
    *Fixed camcorder
    [COLOR="Red"]-20150228-[/COLOR]
    *Enable QCOM's HW AAC encoder"
    *Disable LPA
    *Set default country index to Europe in FM app
    *Create native cgroup
    *Move custom AAPT config to cm.mk
    *Kernel: Tune voltage table
    *Kernel: Misc patches
    [COLOR="Red"]-20150219-[/COLOR]
    *CM sources update
    *Kernel: Re-add intelliactive cpu governor
    *Kernel: Re-add sio i/o scheduler
    *Kernel: Probably fixed random reboots
    *Kernel: eCryptfs: Remove buggy and unnecessary write in file name decode routine
    *Kernel: Νetfilter: conntrack: disable generic tracking for known protocols
    [COLOR="Red"]-20150120-[/COLOR]
    *CM sources update
    *Revert: Remove chmod of /proc/cmdline
    *Kernel: Optional overclock up to 1.7GHz
    *Kernel: Update intelli_plug to v3.9
    *Kernel: Add intellimm cpu governor
    *Kernel: Misc patches
    *Fix encryption after factory reset
    [COLOR="Red"]-20150102-[/COLOR]
    *CM sources update
    *Disable QCOM's HW AAC encoder
    *Disable audio offload
    *Update media_profiles
    *Fix: Now audio from videos plays on both sides of headphones/speaker
    [COLOR="Red"]-20141225-[/COLOR]
    *CM sources update
    *Don't show mobile plan preference
    *Load fastrpc module after boot 
    *Minor cleanup in init.carrier.rc
    *Move wcd9310 symlink creation to msm8930-common
    *msm8930-common:Create wcd9310 symlinks during build process
    *Enable smooth-streaming video-playback
    *Don't mount persdata
    *Revert: Enable large heap for Trebuchet
    *Minor kernel patches
    [COLOR="Red"]-20141205-[/COLOR]
    *CM sources update
    *Remove qrngd service 
    *Add SettingsProvider
    *Update ueventd.qcom.rc 
    *Minor cleanup of init.qcom.rc 
    *Enable large heap for Trebuchet
    *Fix hostapd service to use correct config folder
    *Remove chmod of /proc/cmdline
    *Change NTP_SERVER in gps.conf to use izatcloud 
    *Set default locale to en_UK
    *Remove obsolete option 
    *msm8930-common:Cut EGL cache size in half
    *msm8930-common:Define correct path to hostapd files
    *msm8930-common:Some camera wrapper cleanup and changes 
    *msm8930-common:Disable CCX support in Prima config 
    *msm8930-common:Remove unused option from camera makefile
    *Many kernel patches
    [COLOR="Red"]-20141125-[/COLOR]
    *CM sources update
    *Increase read ahead to 512KB
    *Revert: Enable face detection
    *Revert: Change ADCBID for PROXY Rx
    *Revert: Loganre: Enable proximity wake option
    *Disable interactive governors sync_freq feature
    *Add back couple of missing lines in media_codecs.xml
    *Disable wpa_supplicant log spam 
    [COLOR="Red"]-20141115-[/COLOR]
    *CM Sources update
    *Added Binaries for IPv6 tethering
    *Fixup input paths
    *Removed Fauxsound, it caused calling bug
    *Fixed FM Radio
    *Updated media codecs
    [COLOR="Red"]-20141112-[/COLOR]
    *CM Sources update
    *Use bottom mic for speaker phone 
    *Change ACDBID for PROXY Rx 
    *Enable face detection
    *Audio config improvements
    *Fixed audio playback
    *Wlan: prima: Sync with kk_2.7
    *Milestone M12 release
    [COLOR="Red"]-20141107-[/COLOR]
    *CM sources update
    *Ramdisk updates
    *GPS config improvements
    *GPS HAL improvements
    *Move power management to a separate init.qcom.power.rc
    *Revert:add VR headset to use case, it was breaking mic on phone calls in my tests
    *Official toolchains used
    [COLOR="Red"]-20141102-[/COLOR]
    *CM sources update
    *Kernel: Reduced max OC for both CPU(1.5GHz) and GPU(475MHz) for safety
    *fixed "com.qualcomm.timeservice has stopped"
    [COLOR="Red"]-20141101-[/COLOR]
    *CM sources update
    *fstab updates, now you can mount USB-OTG without a 3rd party app (EXT4 filesystem tested)
    *re-enabled triple framebuffer
    *audio/snd_soc_msm_2x: Add VR headset use case
    *Disabled mpdecision service, we have intelliplug
    [COLOR="Red"]-20141028-[/COLOR]
    *CM Sources Update
    *Kernel:Add Fauxsound, thanks @Paul
    *Kernel:Squashed update of wifi regulatory database
    *Kernel:CPUfreq Updates 
    *Overlay cleanup
    *Add some blobs
    *Enabled GPS XTRA servers
    *Camera HAL code cleanup
    [COLOR="Red"]-20141023-[/COLOR]
    *CM Sources Update
    *Finally stock camera rotation bug is FIXED!!!, thanks Arne Coucheron, Abhisek Devkota
    *Removed AGPS_USE_PSC from GPS HAL again
    *Build.prop updates
    *Kernel: Add GPU OC up to 627 MHz including stock frequencies this time
    *Kernel: Add Intelli_plug hotplug driver as well as msm_hotplug, credits @Faux123
    [COLOR="Red"]-20141020-[/COLOR]
    *CM Sources Update
    *Changed Network buffer sizes from stock
    *Kernel: Manage Offline CPUs
    *Add USB_OTG back to storage menu
    *Add USB-OTG support in kernel (Needs testing, for undesired wakelocks)
    *Some kernel update
    *Reverted Some GPS HAL changes
    [COLOR="Red"]-20141017-[/COLOR]
    *CM Sources Update
    *Correct cpu voltage table in kernel
    *Added Underclock again up to 162 MHz
    *Increased Overclock limit up to 1.7 GHz
    *Removed USB-OTG from storage menu
    *Device tree cleanup/update
    [COLOR="Red"]-20141010-[/COLOR]
    *CM Sources Update
    *Revert: KSM enabled by default
    *M11 milestone release
    *msm8930-common: camera: Don't forcefully enable ZSL
    *Add Overclock: 1.24 GHz, 1.35 GHz, 1.45 GHz
    *Added SmartassV2, Intelliactive CPU governors
    *Added sio and sioplus I/O governor
    [COLOR="Red"]-20141007-[/COLOR]
    *CM Sources Update
    *Fixed Superuser settings force close
    *Fixed Terminal Emulator force close
    *Kernel Downgrade to 3.4.0, it should be more stable
    *Kernel is built with Linaro 4.7 now
    *Update Camera HAL API (arco)
    -Features still present in kernel:
    *Change readahead to 512kB.
    *Voltage Control
    *Optimize KSM
    *USB Fastcharge
    -Features removed from kernel(due to perfomance issues and stability):
    *GPU Overclock
    *GPU Optimizations
    *Graphite Kernel Optimizations
    *O3 Kernel Optimizations
    *Cortex A15 Optimizations
    [COLOR="Red"]-20141005-[/COLOR]
    *CM Sources Update
    *Kernel Update up to 3.4.103, thanks @F4k
    *Remove useless dual sim stuff from ramdisk
    *GPU Overclock up to 627 Mhz (Be careful)
    *GPU Optimizations
    *CPU Voltage Control (Be careful)
    *Enable KSM by default
    *Many, many Kernel Updates
    *Graphite Kernel Optimizations
    *-O3 Kernel Optimizations
    *Change Kernel readahead to 512KB
    *Optimize Kernel SamePage Merging
    *Cortex A15 Optimizations
    *Kernel compiled with Linaro 4.9.2 now
    *Usb Fastcharge support
    *More, more and more
    [COLOR="Red"]-20141003-[/COLOR]
    Changelog:
    *CM Sources Update
    *Fix in liblights
    *Kernel was built with Sabermod 4.7.4 toolchain
    *Updated Recovery (CWM 6.0.5.1)
    [COLOR="Red"]-20140930-[/COLOR]
    Changelog:
    *CM Sources Update
    *Updated Build Fingerprint From Latest Stock Rom
    *Updated fstab
    *Add Missing Device Permissions
    *Kernel Update
    *Overlay Sar Levels(Settings->About Phone->Status->SAR Levels)
    [COLOR="Red"]-20140919-[/COLOR]
    Changelog:
    *CM sources update
    *Kernel Updates
    *Adreno libs update
    [COLOR="Red"]-20140916-[/COLOR]
    *CM sources update
    *Adjustments to power HAL
    *CyanogenMod M10
    [COLOR="Red"]-20140913-[/COLOR]
    Changelog:
    *CM sources update
    *Kernel Updates
    *Wifi Driver Update
    [COLOR="Red"]-20140910-[/COLOR]
    Changelog:
    *CM sources update
    *Update Ramdisk
    *Add Support for GT-S7275T
    *Allow more background services
    *msm8930: Enable triple framebuffer
    [COLOR="Red"]-20140904-[/COLOR]
    Changelog:
    *CM sources update
    *Fixed Missing Preferred Network type under Network Settings
    *msm8930-common: Merge in some wifi config changes from stock KK
    [COLOR="Red"]-20140903-[/COLOR]
    Changelog:
    *CM sources update
    *Some Kernel Update
    [COLOR="Red"]-20140901-[/COLOR]
    Changelog:
    *CM sources update
    *Updated GPS config
    *Fixed WMA audio files playback(Apollo couldn't play .wma files)
    [COLOR="Red"]-20140831-[/COLOR]
    Changelog:
    *CM sources update
    *Massive KitKat Blobs Update from Express 2 and Serrano
    *Added missing OMX decoder
    *Stability should be increased
    *Reworked GPS (arco)
    *Add Support for GT-S7275B
    [COLOR="Red"]-20140829-[/COLOR]
    Changelog:
    *CM sources update
    *Modified Stock Power Profiles to fit our device(corrected cpu states and more)
    [COLOR="Red"]-20140827-[/COLOR]
    Changelog:
    *CM sources update
    [COLOR="Red"]-20140823-[/COLOR]
    Changelog:
    *CM sources update
    *Added Soft Reboot option in Reboot options
    [COLOR="Red"]-20140818-[/COLOR]
    Changelog:
    *CM sources Update
    *Fixed mic on loudspeaker while calling again
    *CM sources update
    [COLOR="Red"]-20140816-[/COLOR]
    Changelog:
    *CM sources update
    [COLOR="Red"]-20140813-[/COLOR]
    Changelog:
    *New Kernel Config, should improve some things, thanks @arco68
    *Removed SmartassV2 governor, reported to use highest frequency all the time
    *CM sources update
    *Device tree update from @arco68
    *Added Blobs from stock ANF2 firmware, thanks @arco68
    *Added Google Camera in build, camcorder lag should disappear
    *Use stock ANF2 ril blobs, should improve network
    *Audio improvements by @arco68
    [COLOR="Red"]-20140806-[/COLOR]
    Changelog:
    *Probably fixed MMs again, need testing and feedback
    *CM Sources Update
    [COLOR="Red"]-20140801-[/COLOR]
    Changelog:
    *CM sources update
    *Removed USB OTG due to wakelock bug
    [COLOR="Red"]-20140724-[/COLOR]
    Changelog:
    *CM source Updates
    *Fixed missing option from storage settings: Unmount SDcard
    [COLOR="Red"]-20140721-[/COLOR]
    *CM sources update
    *Kernel Changes, now camera seems a little more stable to me
    [COLOR="Red"]-20140719-[/COLOR]
    Changelog:
    *Voip Fix
    *CM source Updates
    *Kernel Sources Update
    Add Dock Headset to audio policy
    [COLOR="Red"]-20140716-[/COLOR]
    Changelog:
    *Using custom power HAL (Should improve battery)
    *CM sources update
    *Audio config improvements and cleanup


    Code:
    [URL="http://xdaforums.com/showthread.php?t=2397942"]GAPPS[/URL]

    Code:
    If you like it, give me a thanks :)
    14
    Wifi Working

    Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms :D


    ROM IS BETA, fixes needed!

    WORKING
    Ril
    Bluetooth
    Data (I think there is an issue, but seems to work)
    FM radio


    BUGS
    Camera
    Wifi
    NFC
    Auto-rotate
    You tell me

    link to the cwm recovery needed: https://www.dropbox.com/s/wluzefvek281x8n/cwm-6.0.4.9-loganre.tar.md5

    Link to the rom if you wanna test: https://drive.google.com/file/d/0B7Bqo5x_z18ENjl2V1hfM0pic28/edit?usp=sharing

    INSTALLATION
    Enter download mode (Volume Down + Home + Power Button)
    Install cwm recovery given above via odin v3.0.9 (put it in AP place WITHOUT auto reset option enabled)
    pull out battery when finished
    Enter recovery mode (Vol Up + Home + Power Button)
    Wipe data factory reset
    Install zip from sdcard --> choose zip from sdcard --> cm-11-XXXXXXXX-UNOFFICIAL-loganreltexx.zip
    Reboot system now


    PS: I am not responsible for any damage to your device

    Wifi working! Thanks mir3k from github https://mega.co.nz/#!80kh3S5A!-5UDhZ9931RS44eCVqBvvTmZ1vXcPpgvyye1smwx3MQ
    13
    Update, go grab it :good:
    CyanogenMod 11 project will be slowed down! One of the final releases will be M12 (just waiting still)!
    11
    Just a taste

    l.png
    10
    New build is up with many kernel additions and bug fixes.
    For more look at the changelog :good: