ANNOUNCEMENT
Here is the third Android 10 Open Beta build for the OnePlus 5/5T.
Changelog:
Code:
[B]System:[/B]
• Optimized the system icons in UI of call recording, start-up animations, mobile signal, etc.
• Fixed the bug with access to audio tuner after connecting the earphones
• Fixed the issue with unwanted muting of calls in Google Duo
• Fixed the bug with sending and receiving the messages while registering or activating UPI accounts
• Improved system stability and fixed general bugs
[B]Camera:[/B]
• Improved the stability of camera
[B]Wi-Fi and Internet:[/B]
• Optimized Wi-Fi transfer speed display in network details
• Disabled Airtel VoWiFi
Notes:
• OnePlus Switch cannot back up data stored in lockbox, it is recommended to move the lockbox data out or save it to other equipment to avoid data loss.
• After this update, the backups from OnePlus Switch may not show up. You can fix this issue by updating to the latest OnePlus Switch version from the Play Store.
• Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks. As always, please share your feedback through https://forums.oneplus.com/feedback/. For more information on submitting bugs or suggestions, please refer to the How to Report a Bug thread and feel free to share your product suggestions via the Community App.
• If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
• Click here to find out how to take logs on OxygenOS.
Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.
Warning: Users who are on the Stable build or Android 9 Open Beta build with stock recovery, can update to this build only via update from recovery, which will wipe your entire data.
DOWNLOADS
Full ROM Zips:
• OxygenOS Android 10 Open Beta 3: Official Link | AndroidFileHost Mirror | Google Drive Mirror
• MD5: acbaf20588c67cec7f77ba4780c8e55d
Custom Recoveries:
• TWRP by mauronofrio: Official Link
• TWRP by poad42: Official Link
• blu_spark TWRP by eng.stk: Official Link
• Official TWRP by Dees_Troy: Official Link
Root:
• Magisk: Official Link
Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.
FLASHING INSTRUCTIONS
Download the necessary files from the section above and follow the steps below:
Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.
For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
- Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
- Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
- Select language > Install menu > Install from internal > Select the full zip > Flash
- After a successful flash > Wipe cache
- Reboot
[Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
- Download the full ROM zip from the downloads section above
- Transfer the zip to the root of your device's internal storage
- Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
- Reboot to TWRP and take a nandroid backup of your existing ROM
- Flash Magisk Uninstaller (recommended)
- From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
- From the TWRP menu, Install > Select full ROM zip > Swipe to flash
- Flash the latest stable Magisk in case you want to root
- From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
- If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
- Reboot
Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.
[Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
- Download the full ROM zip from the downloads section above
- Transfer the zip to the root of your device's internal storage
- Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
- Reboot to TWRP and take a nandroid backup of your existing ROM
- Flash Magisk Uninstaller (recommended)
- From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
- From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
- Flash the latest stable Magisk in case you want to root
- From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
- Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
- Reboot
Never Settle.
XDA:DevDB Information
[OFFICIAL] OxygenOS Open Beta for the OnePlus 5T, ROM for the OnePlus 5T
Contributors
Funk Wizard, shadowstep, Some_Random_Username
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Current Beta Version:
Created 2018-10-08
Last Updated 2020-06-28
Last edited: