Search This thread

30adi

Senior Member
Feb 24, 2012
655
205
Nexus 6
Huawei Mediapad M3
The right stock rom to start from

I've been reading android official documentation. In section "Building for devices" it seems like every device model needs the right bootloader and cellradio softwares to work well. ICS needs proprietary hardware code to be loaded from a running device before starting build from source.
So... What about our device? What's the right stock rom codenumber to start from?
And you, arco, where did you start from?
 

primo

Senior Member
Aug 31, 2006
96
37
Thanks for everyone who helped me, it was the bootloader problem. I don't know how I could miss it in the wiki, sorry for that.
About CM9:
It's really awesome, arco did a great job. It's smooth, I don't have wake up lag on 122/interactive, everything's fine so far. I just hope that the camera issue can be fixed some day.
 

FlorisNL

Senior Member
Jun 28, 2011
523
415
Amersfoort
I cannot install boot test... The bootanimation is non stop when i install it.. anybody knows why?

Sent from my GT-I9001 using xda premium
 
  • Like
Reactions: annqx

Daniel.96

Senior Member
Mar 17, 2012
610
1,379
So, after testing every single Romversion (v1-3), Kernel and 2 modified AV -Video Cables to test the TV-out option by changing the values "hdmi=false" to "hdmi=true", I could not get any videosignal. Audio is working fine, but I get the message "No Input" :/. So for me this method is not working. Are there any other ways to make it run/ use TvOut ?

PS: Wiped Data, Chache Partitons and dalvik and set Ondemand@min 245Mhz and get still randon shoutdowns while phone is in standby.
 

CodeXpert

Senior Member
Feb 20, 2012
185
52
Bahla
Few GFX..

vaaews.png



uccyan.png





cy91.png
 
Last edited:

oisis

Senior Member
Oct 9, 2008
1,251
2,095
Out of nowhere
Can you do this also for me ?
Thanka beforehand ! : ))

Sent from my GT-I9001 using Tapatalk 2

Check your PM, should be there.

EDIT: To stop next questions:

I'm using CM9 almost from begnning and it is working realy nice, no bigest problems.
So do in this way:
1. Install official ROM 2.3.6(http://xdaforums.com/showthread.php?t=1533029) - Odin
2. Install FeaMod Recovery(http://xdaforums.com/showthread.php?t=1331164) - Odin
3. Install Arco Recovery(http://speedy.sh/bjt8H/CM9-Recovery.zip) - FeaMod Recovery
4. Do full wipe from system(use code, like dialing: *2767*3855#) - Do backup of internal SDCard beacuse wipe will remove everything
5. Install Arco last stable ROM(http://www.mediafire.com/?1acdn3xfayef1wm) - Arco Recovery
6. Install Arco last kernel(http://www.mediafire.com/?bc46rahh170v74a) - Arco Recovery
Enjoy, hit THX :).
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 116
    Fix for recovery bootloop problem

    Thanks to everyone who hear my pray and tried to help with my problem (bootloop into recovery). And Acro68 sorry that i'm bothered you. I here again to publish the solution. Problem was in bootloader, like people on other forum says (it was damaged somehow, probably because kies update fails before).

    1. Open Odin.exe (UnZip from Odin.zip)
    2. Go into Download mode
    3. Select OPS - AriesVE.ops (UnZip from AriesVE.zip)
    4. Select BOOT - Boot_loader.tar
    5. Flash it and bootloop into recovery never gona happen.

    All the files is attached...
    88
    I and some fellow developers (especially thanks manveru0, skywalker01, other users for testing, reporting and other help) are trying to port AOSS to our device, working with CyanogenMod 7 for now.
    You can check out this thread, repositories, and this post for changelogs, bug reports and so on.
    Github repositories:
    https://github.com/abbradar
    https://github.com/manveru0
    Feel free to check them out and fork!

    Current status of porting:
    Working:
    • Screen (w. touch features, w. backlight)
    • Buttons
    • Radio (w. 2G/3G, Internet is working)
    • Bluetooth
    • WLAN
    • Rotate sensor
    • Handset button
    • USB
    • Battery sensors
    • Camera
    • GPU acceleration
    Not working:
    • GPS (does not lock)
    • Audio (both input and output, will be tough)
    • Camcorder (because of audio)
    • Storage-related (external SD not working, internal with no USB storage, vold misconfigured)
    • USB tethering/MTP (will require some programming)
    • Host access point (similar to USB tethering)
    • Light sensor
    • Buttons force feedback
    • Contacts on SIM card
    Not tested:
    • Other sensors (compass, magnetic)
    • HDMI (should not work, as logs say)
    • FM radio (should not work)
    Another bugs:
    • CyanogenMod settings doesn't work (fixed by
    • Random reboots sometimes
    • Sometimes - very long resume from sleep (30 seconds approximately)
    • Keyboard is very small
    • Dialer is laggy (because of audio)
    • USB connected notification is shown without USB cable attached
    • APN database is not working (enter settings manually)
    • Vibration strength is very weak
    Regressions: (worked before)
    • Nothing for now
    Visualized changelogs (with CM9), made and hosted by CastagnaIT in dedicated thread:
    http://xdaforums.com/showthread.php?t=1492165

    Last testing build (will be updated after major improvements or after some time): http://xdaforums.com/showpost.php?p=22394052&postcount=284
    skywalker01's testing builds: http://xdaforums.com/showpost.php?p=22969855&postcount=394

    User tomsteel1 have made good-looking banner images for our work: http://xdaforums.com/showpost.php?p=22506050&postcount=350
    45
    Hello, guys.
    First of all, sorry for my 2.5-month absence, I was really short of time because of university and long illness, so I decided to freeze module development for a while. I understand that doing so without any posts there was rude, and ask for understanding.
    Next, it was a great surprise for me to see really working CM9 for our phone!!! I can only say GJ to arco68 - thank you guy, you really did this, even without a phone! I don't think my work is relevant anymore, so I'll stop with CM7 and will check out his work (maybe I'll be of some help). I've been able to found quick solution for working audio in 2.3.7, also, but I don't think it is relevant anymore ^_^.
    Once again, good job, arco68. I'll try to build CM9 with your configuration and test it, so I'm going to be just user and tester for now. ^_^
    43
    Here's a new full test build of the rom. This contains fixed boot image, so it actually boots (unless I screwed something up this time :p). USB connect/disconnect should work correctly, wifi I *hope* works now. In addition I added support for automatic brightness and cleaned up some stuff.

    http://www.mediafire.com/?sgyv7betz6cj9mp

    And lol at the tags. Who wrote that? :D
    41
    I am a CM9 porter for Galaxy SL. I have come across issues with audio in Galaxy SL also, which I have overcome by coding an Audio wrapper. If you need any help with fixing audio on S+, count me in.