[Temasek][CM13/MM][6/7] - KLTE(DV-SPR-USC)

Is Kornfed behaving like a **** with his answers?

  • Yes

    Votes: 11 13.8%
  • No

    Votes: 24 30.0%
  • Kinda, sometimes

    Votes: 7 8.8%
  • Who cares, I just came for the rom, hell yeah.

    Votes: 38 47.5%

  • Total voters
    80
  • Poll closed .
Search This thread

kornfed

Senior Member
Sep 10, 2014
1,993
6,297
Temasek's UNOFFICIAL CM13 BUILDS
OFFICIAL ROM MAINTAINER THREAD

E5scMLq.png


This is the official maintainer thread for all current and future unofficial builds of CM13 created by @temasek. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.

DISCLAIMER
Code:
/*
 * Your warranty is now void. Knox 0x1.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
 */

Foreward
This thread is currently under maintenance. Should there be any inaccurate information, please PM me. Images and formatting will be handled at a future date.
CM12 requires at least an Android 4.4 (or higher when available) bootloader.
This ROM supports each of: KLTE
users may receive delayed builds or less frequent builds.




dalPu6H.png

Download Links and Changelog
FAQ and Trouble Shooting

SxKmg8F.png

The lastest version TWRP (2.8.1.0) or Philz CWM is recommended.

Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.

Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.

zoyBj1O.png


rHkzLA0.png


More:
sOBPbcR.png


X6Buelf.png



8TBhvee.png

@temasek Rom Maintainer
@albinoman887 Device Maintainer
@DrawnToLife Much thanks for OP & Images
67PE5Dv.png

@albinoman887 - (Device maintainer KLTE ) matt.filetto@gmail.com
 
Last edited:

kornfed

Senior Member
Sep 10, 2014
1,993
6,297
Z6w3aQn.png

KLTE
KLTESPR
KLTEUSC
KLTEDV
Recommended GApps (PA Lollipop GApps) [Click here]
Alternate GApps (Minimal Lollipop GApps)
v1FVvk2.png

Build Version: Marshmallow 6.01
Kernel Version: Build v6.x+

Changelog
Preview 4.3
• Camera/Torch broken in 4.2 now fixed. Qcom selinux branch changes caught many off guard in many devices including my build. This was fixed by importing qcom selinux policy mk file into our device tree.
• Massive revamp in fstab & init files by slayher. Initially we thought because of this change, it may require a new recovery but proven that existing recovery works just fine. In any case, I've built all variants of recovery with this new change but I've not decided to release since existing ones works fine.
• Multiuser is now active since PREVIEW 4.2
• Recents panel clear all button by Cristiano Matos - Option for left or right.
• Remove carrier provisions pushed by tattooboy to fix tmo wifi tethering
• Major changes in how default CM Package is presented. IT IS NOW ODEXed by default. Now a build stands at 298.3 MB compared to about 257 MB from last build. Probably bad news for themers.
• Updated cm sources

For the most up to date changelog please visit:
Temasek’s CM12 Github Commits
KLTE Device Sources
Lastest Build Changelog
--
 
Last edited:

kornfed

Senior Member
Sep 10, 2014
1,993
6,297
W09eVKN.png


MY SD Card Isn't Working
- Format the SD Card in recovery to Ext4 (from FAT) and it should be good to go. Besides, who likes the 3.9GB file limit of FAT anyways :)

Recommended Trickster Settings
- MPdecision -> Off
- Intelliplug -> On

Work In Progress. Will be updated as comments are added.


WRSPdM2.png

• Stock messaging app - send button stays disabled no matter what. Use a 3rd party application for now. Receiving MMS using the stock application works, but sending does not.
• Cannot hang up from phone call - airplane mode or reboot is the only way to hang up. [Sprint Only?]
• Data reported not working for some users.
• Ringing is faint and sometimes no visual indication of a call is present. Fixed, but not implemented in Preview 4.1.
• Laggy game graphics.
• When selecting music (mp3) as alarm ringtone, the standard ringtone overrides the selection.
• Weekdays alarms are shifted one day further; If you select "s" for Sunday the alarm rings on Monday. If you select Monday the alarm rings on Tuesday, etc.
• Carrier Settings FC.
• Display Settings FC.
• Wake device using home button no working.

Bug Report Rules / Template:
If you are experiencing any issues and have performed a dirty flash, please try a clean flash prior to posting your question. Thank you!
If you have an issue and want require help, please submit a kmsg log with the following information:

Note: Do not pull out battery or else no log; this log can be located at: /proc/last_kmsg/

When Possible, Please Include:
- Your device variant and model number.
- Your bootloader version, baseband, etc.
- Instructions to recreate the error you encountered.
- Any other relevant information (i.e. Kernel version/Build, etc.).

Please read all of the OP before you post. Do not report issues on previous builds only on the latest.

Rules:

- Dont ask for ETA's
- Keep it ontopic
- When reporting a bug, point out what build and device you are on with a log attached.
- Dont seek support here for external mods, added features outside of the build itself.
- Have fun and enjoy the rom.​
 
Last edited:

gdmlaz

Senior Member
Jul 16, 2010
1,976
606
Miami
Working Great here only 1 problem decided to try out gesture for screenlock and is so freaking hard basically impossible for me to put the same gesture i tried it out with and it doesn't give you any other option once you set one to change it to another or put it a regular pin lock if you don't know the gesture you originally put....... anyways to reset this ???
 

Top Liked Posts

  • There are no posts matching your filters.
  • 77
    Temasek's UNOFFICIAL CM13 BUILDS
    OFFICIAL ROM MAINTAINER THREAD

    E5scMLq.png


    This is the official maintainer thread for all current and future unofficial builds of CM13 created by @temasek. This thread was created on his behalf and will be maintained accordingly. Please report any bugs or issues that you see; when applicable, please follow the bug reporting format found in post #3. Download links, changelogs and other important information can be found in post #2. Thank you.

    DISCLAIMER
    Code:
    /*
     * Your warranty is now void. Knox 0x1.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
     */

    Foreward
    This thread is currently under maintenance. Should there be any inaccurate information, please PM me. Images and formatting will be handled at a future date.
    CM12 requires at least an Android 4.4 (or higher when available) bootloader.
    This ROM supports each of: KLTE
    users may receive delayed builds or less frequent builds.




    dalPu6H.png

    Download Links and Changelog
    FAQ and Trouble Shooting

    SxKmg8F.png

    The lastest version TWRP (2.8.1.0) or Philz CWM is recommended.

    Clean Installation
    1. Download the appropriate ROM using links provide in the second post.
    2. Download the appropriate GApps following the links in the second post.
    3. Back up any and all important data.
    5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
    6. WIPE SYSTEM.
    7. Flash the ROM in recovery.
    7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
    8. Flash the GApps.
    9. WIPE DALVIK/CACHE (for good measure).
    10. Reboot Device.

    Dirty Flash/Update
    1. Download the appropriate ROM using links provide in the second post.
    2. WIPE CACHE/DALVIK.
    3. Install the update zip from recovery.
    3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
    4. WIPE DALVIK/CACHE (for good measure).
    5. Reboot Device.

    zoyBj1O.png


    rHkzLA0.png


    More:
    sOBPbcR.png


    X6Buelf.png



    8TBhvee.png

    @temasek Rom Maintainer
    @albinoman887 Device Maintainer
    @DrawnToLife Much thanks for OP & Images
    67PE5Dv.png

    @albinoman887 - (Device maintainer KLTE ) matt.filetto@gmail.com
    27
    27/11 CM13 - Temasek Build

    27/11 CM13 - Temasek Build is online for KLTE

    Special thanks go to @temasek , @albinoman887 , @DevVorteX for their maintaining of KLTE, @evnimaster for his dedicated host, to all of you who I am forgetting and for your patience and last but not least my pc!
    26
    Temasek 3.0- 20-12

    Temasek 3.0- 20-12 / LP 5.02
    http://fs1.androidfilesharing.com/d581150ce3e24ecf

    Changelog:

    - Android 5.02 sources synced
    - hardware button lights
    - bluetooth improvements
    - Superuser upgrades
    - CM improvements
    25
    Z6w3aQn.png

    KLTE
    KLTESPR
    KLTEUSC
    KLTEDV
    Recommended GApps (PA Lollipop GApps) [Click here]
    Alternate GApps (Minimal Lollipop GApps)
    v1FVvk2.png

    Build Version: Marshmallow 6.01
    Kernel Version: Build v6.x+

    Changelog
    Preview 4.3
    • Camera/Torch broken in 4.2 now fixed. Qcom selinux branch changes caught many off guard in many devices including my build. This was fixed by importing qcom selinux policy mk file into our device tree.
    • Massive revamp in fstab & init files by slayher. Initially we thought because of this change, it may require a new recovery but proven that existing recovery works just fine. In any case, I've built all variants of recovery with this new change but I've not decided to release since existing ones works fine.
    • Multiuser is now active since PREVIEW 4.2
    • Recents panel clear all button by Cristiano Matos - Option for left or right.
    • Remove carrier provisions pushed by tattooboy to fix tmo wifi tethering
    • Major changes in how default CM Package is presented. IT IS NOW ODEXed by default. Now a build stands at 298.3 MB compared to about 257 MB from last build. Probably bad news for themers.
    • Updated cm sources

    For the most up to date changelog please visit:
    Temasek’s CM12 Github Commits
    KLTE Device Sources
    Lastest Build Changelog
    --
    23
    21/1 CM13 - Temasek Build

    New build is up!